Energy harvesting based on piezoelectric Ericsson cycles in a piezoceramic material
- 277 Downloads
The possibility of recycling ambient energies with electric generators instead of using batteries with limited life spans has stimulated important research efforts over the past years. The integration of such generators into mainly autonomous low-power systems, for various industrial or domestic applications is envisioned. In particular, the present work deals with energy harvesting from mechanical vibrations. It is shown here that direct piezoelectric energy harvesting (short circuiting on an adapted resistance, for example) leads to relatively weak energy levels that are insufficient for an industrial development.
By coupling an electric field and mechanical excitation on Ericsson-based cycles, the amplitude of the harvested energy can be highly increased, and can reach a maximum close to 100 times its initial value. To obtain such a gain, one needs to employ high electrical field levels (high amplitude, high frequency), which induce a non-linearity through the piezoceramic. A special dynamic hysteresis model has been developed to correctly take into account the material properties, and to provide a real estimation of the harvested energy. A large number of theoretical predictions and experimental results have been compared and are discussed herein, in order to validate the proposed solution.
KeywordsEuropean Physical Journal Special Topic Fractional Derivation Mechanical Excitation Tune Mass Damper Loop Area
Unable to display preview. Download preview PDF.
- 2.L. Collins, IEEE Power Eng. 20, 34 (2006)Google Scholar
- 4.X. Tang, L. Zuo, “Towards MESO and macro scale energy harvesting of vibration” Proc. 2009 ASME Int. Mechanical Engineering Congress and Exposition (Florida, 2009)Google Scholar
- 9.T. Ni, L. Zuo, A. Kareem, “Assessment of energy potential and vibration mitigation of regenerative tuned mass dampers on wind excited tall buildings”, ASME Design Engineering Technical Conf., Washington DC, 28–31 Aug., 2011Google Scholar
- 10.X. Tang, L. Zuo, “Self-powered active control of structures with TMDs”, IMAC XXVIII Conf. and Exposition on Structural Dynamics: Structural Dynamics and Renewable Energy (Florida, 2010)Google Scholar
- 11.X. Tang, L. Zuo, “Regenerative semi-active control of tall building vibration with series TMDs”, Proc. America Control Conf., Baltimore, MD, June 30–July 2, 2010Google Scholar
- 17.T.W. Ma, Proc. Institution Mech. Engineers part I – J. Syst. Control Eng. 225, 467 (2011)Google Scholar