Abstract—The influence of thermohydrogen treatment combined with hot rolling on the structural formation in α- and near-α-titanium alloys has been studied. The prospects of obtaining submicron-grained sheet semifinished products of VT5 (Ti–5.8Al–0.1Fe, wt %) and VT20 (Ti–5.9Al–1.5V–1.2Mo–1.8Zr–0.1Fe, wt %) alloys are shown. In these materials, a submicron-grained structure allows the plastic deformation to be induced by superplasticity at temperatures reduced by 100–200°С.
Similar content being viewed by others
REFERENCES
The official website of the President of Russia. http://пpeзидeнт.pф/ref_notes/988. Accessed June 27, 2016.
Kablov, E.N., Strategic development of the materials and technologies for their recycling until 2030, Aviats. Mater. Tekhnol., 2012, suppl., pp. 7–17.
Kablov, E.N., Russia requires new advanced materials, Redkie Zemli, 2014, no. 3, pp. 8–13.
Il’in, A.A. and Gol’tsova, M.V., Hydrogen treatment of materials, Tekhnol. Legk. Splavov, 2008, no. 1, pp. 5–8.
Il’in, A.A., Kolachev, B.A., Nosov, V.K., and Mamonov, A.M., Vodorodnaya tekhnologiya titanovykh splavov (Hydrogen Technology of Titanium Alloys), Il’in, A.A., Ed., Moscow: Mosk. Inst. Stali Splavov, 2002.
Il’in, A.A., Mamonov, A.M., and Kollerov, M.Yu., Thermal hydrogen treatment as a new method for processing of titanium alloys, Perspekt. Mater., 1997, no. 1, pp. 5–14.
Il’in, A.A., Skvortsova, S.V., Mamonov, A.M., Gurtovaya, G.V., and Kurnikov, D.A., Structure modification of titanium alloys by thermal hydrogen treatment, Titan, 2004, no. 1, pp. 25–29.
Il’in, A.A., Skvortsova, S.V., Mamonov, A.M., and Kollerov, M.Yu., Phase and structural transformations in titanium alloys of various classes under hydrogen treatment, Titan, 2007, no. 1, pp. 32–37.
Kolachev, B.A., Il’in, A.A., Nosov, V.K., and Mamonov, A.M., Advanced hydrogen technology of titanium alloys, Tekhnol. Legk. Splavov, 2007, no. 3, pp. 10–26.
Skvortsova, S.V., Panin, P.V., Nochovnaya, N.A., Grushin, I.A., and Mitropol’skaya, N.G., Effect of hydrogen on phase and structural transformations in VT6 titanium alloy, Tekhnol. Legk. Splavov, 2011, no. 4, pp. 35–40.
Panin, P.V., Dzunovich, D.A., and Zasypkin, V.V., Creation of two-phase composite structure in alpha-alloy Ti–6Al using thermal hydrogen treatment, Nauch. Tr., Vestn. Mosk. Aviats. Tekhnol. Inst., 2012, no. 19 (91), pp. 33–37.
Panin, P.V., Grushin, I.A., and Mitropol’skaya, N.G., Change of structural-phase state of VT6 titanium alloy after additional alloying by hydrogen, Nauch. Tr., Vestn. Mosk. Aviats. Tekhnol. Inst., 2013, no. 20 (92), pp. 31–34.
Il’in, A.A., Skvortsova, S.V., Mamonov, A.M., Permyakov, G.V., and Kurnikov, D.A., Effect of thermohydrogen treatment on the structure and properties of titanium alloy castings, Met. Sci. Heat Treat., 2002, vol. 44, nos. 5–6, pp. 185–189.
Il’in, A.A., Skvortsova, S.V., and Mamonov, A.M., Control of the structure of titanium alloys by the method of thermohydrogen treatment, Mater. Sci., 2008, vol. 44, no. 3, pp. 336–341.
Panin, P.V., The pattern of phase composition and structure in titanium alloys in thermal hydrogen treatment and plastic deformation, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow, 2009.
Panin, P.V., Dzunovich, D.A., and Alekseev, E.B., Phase composition of titanium alloys additionally alloyed by hydrogen: a review, Tr. Vseross. Inst. Aviats. Mater., 2015, no. 3, art. ID 03. doi 10.18577/2307-6046-2015-0-3-3-3. http://www.viam-works.ru. Accessed June 27, 2016.
Kaibyshev, O.A. and Utyashev, F.Z., Sverkhplastichnost’, izmel’chenie struktury i obrabotki trudnodeformiruemykh splavov (Superplasticity, Structure Grinding, and Processing of Hardly Deformed Alloys), Moscow: Nauka, 2002.
Zeng, L., Zhao, Y., Li, D., and Li, Q., Superplastic properties of submicron-grained titanium alloy, Rare Met. Mater. Eng., 2006, vol. 35, no. 1, pp. 248–251.
Skvortsova, S.V., Zasypkin, V.V., Panin, P.V., and Zainetdinova, G.T., Structure formation of Ti–6Al titanium alloy after thermal hydrogen treatment, Materialy mezhdunarodnoi konferentsii “Ti-2009” (Proc. Int. Conf. “Ti-2009”), Kyiv: Inst. Metallofiz. im. G.V. Kurdyumova, 2009, pp. 217–222.
Il’in, A.A., Skvortsova, S.V., Panin, P.V., and Shalin, A.V., Effect of thermal hydrogen treatment and plastic deformation on structuring in titanium alloys of various classes, Aviats. Prom-st, 2009, no. 4, pp. 31–36.
Panin, P.V., Shiryaev, A.A., and Dzunovich, D.A., The temperature-concentration dependence diagram of the phase composition of VT6 titanium alloy alloyed by hydrogen, Tekhnol. Mashinostr., 2014, no. 3, pp. 5–9.
Panin, P.V., Dzunovich, D.A., and Shiryaev, A.A., Thermal stability of the structure of VT6 titanium alloy after thermal hydrogen treatment, Tr. Vseross. Inst. Aviats. Mater., 2016, no. 2, art. ID 05. doi 10.18577/2307-6046-2016-0-2-5-5. http://www.viam-works.ru. Accessed June 27, 2016.
Kablov, E.N., Innovative developments of the All-Russian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030,” Aviats. Mater. Tekhnol., 2015, no. 1, pp. 3–33.
Petukhov, A.N., Construction strength of titanium alloys and the parts formed thereof, Aviats. Mater. Tekhnol., 2007, no. 1, pp. 8–13.
Nosov, V.K. and Ovchinnikov, A.V., Hydrogen plastification: the general pattern and possible use, Tekhnol. Legk. Splavov, 2008, no. 3, pp. 10–17.
Senkov, O.N. and Jonas, J.J., Effect of phase and hydrogen level on the deformation behavior of titanium-hydrogen alloys, Met. Mater. Trans. A, 1996, vol. 27, no. 7, pp. 1869–1876.
Levin, I.V., Kozlov, A.N., Tetyukhin, V.V., Zaitsev, A.V., and Berestov, A.V., Strain characteristics of Ti6Al4V alloy super fine grain sheets under SPF conditions, Proc. 10th World Conf. on Titanium, Hamburg, Germany, July 13–18, 2003, Weinheim: Wiley, 2004, vol. 1, pp. 577–580.
Il’in, A.A., Mekhanizm i kinetika fazovykh i strukturnykh prevrashchenii v titanovykh splavov (Mechanism and Kinetics of Phase and Structural Transformations in Titanium Alloys), Moscow: Nauka, 1994.
Ovchinnikov, A.V., Nosov, V.K., Afonin, V.E., and Panin, P.V., Deformation of titanium–hydrogen alloys, Tekhnol. Legk. Splavov, 2007, no. 3, pp. 96–99.
ACKNOWLEDGEMENTS
This work was partially supported by the Russian Foundation for Basic Research (project no. 16-32-00175-mol_a dedicated to high-resolution electron microscopy of the thermomechanical stability of microstructure in the presence of alloying elements and project no. 16-32-50052-mol_nr considering the state-of-the-art electron microscopy characterization of phase composition of titanium alloys with alloying elements).
The study was performed within the framework of the complex scientific program 10 “Energy-Efficient, Resource-Saving and Additive Technologies of the Fabrication of Details, Semifinished Products and Structures” (Strategic Directions of the Development of Materials and Technologies for Their Recycling for the Period to 2030).
We express our deepest gratitude to A.A. Il’in, Academician of the Russian Academy of Sciences and one of the founders of hydrogen titanium alloys technology in Russia, as well as to his colleagues Profs. S.V. Skvortsova and A.M. Mamonov, for their kind assistance and mentorship in acquisition and interpretation of experimental data.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by O. Maslova
Rights and permissions
About this article
Cite this article
Panin, P.V., Manokhin, S.S. & Dzunovich, D.A. Research on Submicron-Grained Structure Formation in Titanium Alloys upon Reversible Hydrogenation and Plastic Deformation. Inorg. Mater. Appl. Res. 9, 1029–1034 (2018). https://doi.org/10.1134/S2075113318060229
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113318060229