Abstract
We developed a process of plasma wire spraying of three-dimensional capillary porous titanium coatings for intraosteal implants with the use of two additional arc discharges between the plasma gun and the wire and between the plasma gun and the substrate. By raising the temperature of sprayed particles and activating the substrate, we enhanced the shear strength up to 120 MPa for a titanium coating having the porosity of 46%.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Dorozhkin, S.V., Review calcium orthophosphate deposits: Preparation, properties and biomedical applications, Mater. Sci. Eng., 2015, vol. 55, pp. 272–326.
Sahay, V., Lare, P.J., and Hahn, H., Physical and mechanical characterization of porous coatings for medical and dental devices. Thermal spray, research and application, in Proc. 3rd Nat. Thermal Spray Conf., Long Beach, CA. USA, pp. 425–430.
Harris, D.H., Bioinert CP–Ti and Ti–6Al–4V Coatings by the Arc-plasma Spray Process, Daytom: Titanium Development Assoc., 1990.
Mohseni, E., Zalnezhad, E., and Bushroa, A.R., Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant, Int. J. Adhesion and Adhesives, 2014, vol. 48, pp. 238–257.
Borsari, V., Giavaresi, G., Fini, M., Torricelli, P., Salito, A., Chiesa, R., Chiusoli, L., Volpert, A., Rimondini, L., and Giardino, R., Physical characterization of different-roughness titanium surfaces, with and without hydroxyapatite coating, and their effect on human osteoblast-like cells, J. Biomed. Mater. Res. J. Part B: Appl Biomater., 2005, vol. 75, pp. 359–368.
Borsari, V., Fini, M., Giavaresi, G., Tschon, M., Chiesa, R., Chiusoli, L., Salito, A., Rimondini, L., and Giardino, R., Comparative in vivo evaluation of porous and dense duplex titanium and hydroxyapatite coating with high roughnesses in different implantation environments, J. Biomed. Mater. Res. A, 2009, vol. 89, pp. 550–560.
Kalita, V.I. and Gnedovets, A.G., Plasma spraying of capillary porous coating: Experiments, modeling, and biomedical applications, Plasma Processes and Polymers, 2005, vol. 2, pp. 485–492.
Gnedovets, A.G., Kalita, V.I., Komlev, D.I., Yerokhin, A.L., and Matthews, A., Plasma spraying of capillary- porous coatings: experiments, modeling and applications, in IVC-16/ICSS-12/NANO-8, Venice, 2004, pp. 398–399.
Kalita, V.I., Bocharova, M.A., Gnedovets, A.G., Truchnicova, A.S., Yerokhin, A.L., Matthews, A., and Shaternicov, B.N., Structure and mechanical properties of novel plasma sprayed titanic capillaryporous for intrabone implants, in IVC-16/ICSS-12/NANO-8, Venice, 2004, pp. 58–59.
Kalita, V.I., Trushnikova, A.S., Bocharova, M.A., and Shaternikov, B.N., Surface structure of titanium materials intended for interosseous implants, Russ. Metall. (Metally), 2005, vol. 3, pp. 282–288.
Kalita, V.I., Gnedovets, A.G., Mamaev, A.I., Mamaeva, V.A., Malanin, D.A., and Pisarev, V.B., Plasma deposited bioactive porous coatings for intrabone implants, in Abstracts and Full-Papers CD of 17th Int. Symp. on Plasma Chemistry (ISPC-17), Toronto, Canada. 2005, CD Paper 535, pp. 1105–1106.
Arola, D.D. and McCain, M.L., Abrasive waterjet peening: A new method of surface preparation for metal orthopedic implants, J. Biomed. Mater. Res. Part. B: Appl. Biomater. 2000. V. 53, pp. 536–546.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.I. Kalita, D.I. Komlev, A.A. Radyuk, 2015, published in Materialovedenie, 2015, No. 12, pp. 29–35.
Rights and permissions
About this article
Cite this article
Kalita, V.I., Komlev, D.I. & Radyuk, A.A. Structure and mechanical properties of three-dimensional capillary-porous titanium coatings on intraosteal implants. Inorg. Mater. Appl. Res. 7, 536–541 (2016). https://doi.org/10.1134/S2075113316040146
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113316040146