Advertisement

Inorganic Materials: Applied Research

, Volume 6, Issue 4, pp 343–349 | Cite as

On problem of increasing the structural strength of maraging steels

  • V. B. Dementyev
  • A. A. Sukhikh
  • T. M. Makhneva
Article
  • 31 Downloads

Abstract

The ways to increase the reliability characteristics by creating high-nickel austenite of a specialmorphology in a 03N18K9M5T martensite steel and decrease the tendency of a 08Kh15N5D2T martensite–austenite steel to brittle fracture are shown.

Keywords

maraging steels heat treatment phase transformations retained and reverted austenite nanostructure impact toughness ESR VAR 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Potak, Ya.N., Vysokoprochnye stali (High-Strength Steels), Moscow: Metallurgiya, 1972.Google Scholar
  2. 2.
    Perkas, M.D. and Kardonskii, V.M., Vysokoprochnye martensitno-stareyushchie stali (High-Strength Maraging Steels), Moscow: Metallurgiya, 1970.Google Scholar
  3. 3.
    Makhneva T.M. The nature of shock viscosity level instability and low technological plast at production of large-dimension half-finished products from corrosion–resistant maraging steels, perfection of their treatment technology, Doctoral (Eng.) Dissertation, Izhevsk, 2012.Google Scholar
  4. 4.
    Startsev, V.I., Il’ichev, V.Ya., and Pustovalov, V.V., Plastichnost’ i prochnost’ metallov i splavov pri nizkikh temperaturakh (Plasticity and Strength of Metals and Alloys at Low Temperatures), Moscow: Metallurgiya, 1975.Google Scholar
  5. 5.
    Tikhomirov, V.V., Shakhnazarov, Yu.V., Pankov, A.G., and Vorob’eva, N.I., Dependence of N18K9M5T steel viscosity at 196°C from quantity and stability of residual austenite at distruction, Fiz. Met. Metalloved., 1971, vol. 32, pp. 641–643.Google Scholar
  6. 6.
    Vylezhnev, V.P., Kokovyakina, S.A., Simonov, Yu.N., and Sukhikh, A.A., Elevation of reliability characteristics of maraging steel 03N18K9M5T by creating a nanotriplex type structure, Metal Sci. Heat Treat., 2011, no. 11–12, pp. 550–557.Google Scholar
  7. 7.
    Vylezhnev, V.P., Sukhikh, A.A., Bragin, V.G., and Kokovyakina, S.A., Mechanical properties of grade N18K9M5T maraging steel containing retained and reversed austenite, Fiz. Met. Metalloved., 1993, vol. 75, pp. 157–165.Google Scholar
  8. 8.
    Vylezhnev, V.P., Sukhikh, A.A., Bragin, V.G., et al., Formation of austenite and its structure in maraging N18K9M5T Steel, in Problemy mekhaniki i materialovedeniya (Problems of Mechanics and Material Science) Izhevsk: Inst. Fiz. Met. Ural. Otd. Ross. Akad. Nauk, 1994, pp. 118–133.Google Scholar
  9. 9.
    Georgiev, M.N., Vyazkost’ malouglerodistykh stalei (Viscosity of Low-Carbn Steels), Moscow: Metallurgiya, 1973.Google Scholar
  10. 10.
    Sukhikh, Ar.A., Dement’ev, V.B., and Sukhikh, An.A., On reasons of high strength of residual and reverted austenite of maraging N18K9M5T steel, Khim. Fiz. Mezoskop., 2008, vol. 10, pp. 200–206.Google Scholar
  11. 11.
    Sukhikh, A.A and Vylezhnev, V.P., Effect of (α+γ)structure on shock viscosity and texture of breaks in maraging N18K9M5T steel, Khim. Fiz. Mezoskop., 2012, vol. 14, pp. 59–71.Google Scholar
  12. 12.
    Kardonskii, V.M., Austenite stabilization at reversal α-γ transformation, Fiz. Met. Metalloved., 1975, vol. 40, pp. 1008–1012.Google Scholar
  13. 13.
    Malyshev, K.A., Sagaradze, V.V., Sorokin, I.P., Zemtsova, N.D., Teplov, V.A., and Uvarov, A.I., Fazovyi naklep austenitnykh splavov na zhelezonikelevoi osnove (Phase Peening of Austenitic Alloys on the Fe-Ni Basis), Moscow: Nauka, 1982.Google Scholar
  14. 14.
    Sukhikh, A.A. and Shavrin, O.I., Dependence of mechanical properties of maraging N18K9M5T steel from content of stabilized austenite, in Materialovedenie i obrabotka materialov. Sb. Nauch. Tr. (Material Science and Material Treatment. Coll. Papers) Izhevsk: Inst. Fiz. Metal. Ural. Otd. Ross. Akad. Nauk, 2005, pp. 83–90.Google Scholar
  15. 15.
    Antolovich, S.D., Saxena, A., and Chanani, G.R., Increased fracture toughness in a 300 grade maraging steel as result of thermal cycling, Metall. Trans., 1974, vol. 5, pp. 623–632.CrossRefGoogle Scholar
  16. 16.
    Makhneva, T.M., Cold brittleness of corrosion-resistant maraging steel 08Kh15N5D2T, Metal Sci. Heat Treat., 2012, vol. 53, pp. 573–577.CrossRefGoogle Scholar
  17. 17.
    Gulyaev, A.P., Chistaya stal’ (Clear Steel), Moscow: Metallurgiya, 1976.Google Scholar
  18. 18.
    Makhneva, T.M. and Dement’ev, V.B., Effect of refining method on structure and properties of VNS2 steel, Izhevsk: Vestnik Izhevsk. Gos. Tekhn. Univ., 2009, no. 4, pp. 4–9.Google Scholar
  19. 19.
    Makhneva, T.M. and Makhnev, E.S., Effect of titanium on the resistance of maraging steel 08Kh15N5D2T to brittle failure, Metal Sci. Heat Treat., 1991, vol. 32, pp. 603–607.CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2015

Authors and Affiliations

  • V. B. Dementyev
    • 1
  • A. A. Sukhikh
    • 1
  • T. M. Makhneva
    • 1
  1. 1.Institute of Mechanics, Ural BranchRussian Academy of SciencesIzhevskRussia

Personalised recommendations