Abstract
Polymer composites based on epoxy resin and containing modifying additives, such as multilayer carbon nanotubes containing nickel and activated carbon, are investigated. The surface morphology and surface tension of composites are studied. The temperature dependence of the heat capacity is shown. The influence of carbon nanotubes on the properties of polymer-matrix nanocomposites is discussed.
Similar content being viewed by others
References
Kononova, S.V., Korytkova, E.N., Romashkova, K.A., et al., Nanocomposite Based on Polyamidoimide with Hydrosilicate Nanoparticles of Varied Morphology, Zh. Prikladnoi Khim., 2007, vol. 80, no. 12, pp. 2064–2070 [Russ. J. Appl. Chem. (Engl. Transl.), vol. 80, no. 12, p. 2142].
Biercuk, M.J., Llaguno, M.C., Radosavljevic, M., et al., Carbon Nanotube Composites for Thermal Management, Appl. Phys. Lett., 2002, vol. 80, pp. 2767–2769.
Laurent, Ch. and Peigney, A., Carbon Nanotubes in Composite Materials, in Encyclopedia of Nanoscience and Nanotechnology, Am. Sci. Publ., 2004, vol. 1, pp. 635–654.
Trenisova, A.L., Anoshkin, I.V., Gorbunova, I.Yu., and Kerber, M.L., Studies of the Effect of Carbon Nanotubes on the Dynamic Mechanical Properties of an Epoxy Polymer, Plast. Massy, 2006, no. 11, p. 635. [Int. Polym. Sci. Technol., (Engl. Transl.), 2007, vol. 34, no. 11, p. 7].
Trenisova, A.L., Anoshkin, I.V., Gorbunova, I.Yu., et al., Investigation of the Properties of Nanocomposites Based on the Epoxy Oligomer and Different Filling Materials, Usp. Khim. Khim. Tekhnol., 2007, vol. 21, no. 6, pp. 9–14.
Shuklin, S.G., Multilayer Flame- and Heat-Shielding Coatings Containing Metal-Containing Carbon Nanostructures, Khim. Volokna, 2006, no. 3, pp. 15–20 [Fibre Chem. (Engl. Transl.), vol. 38, no. 3, p. 240].
Tomishko, M.M., Alekseev, A.M., Tomishko, A.G., et al., Carbon Nanotubes are the Basis for Material of the Future, Nanotekhnol., 2004, no. 1, pp. 10–15.
Tomishko, M.M., Demicheva, O.V., Alekseev, A.M., et al., Multilayer Carbon Nanotubes and Their Application, Ross. Khim. Zh., 2008, vol. L2, no. 5, pp. 39–43.
Buzilov, S.V. and Kiramov, R.I., Opredelenie profilya lezhashchei kapli, Mat. III Nauch.-Tekhn. Konf. Priborostroenie v XXI veke (Proc. III Sci. Tech. Conf. Instrument Engineering in the twenty first century), Izhevsk, 2007, pp. 124–127.
Gnedin, E.V., Kozlova, N.V., Gitina, R.M., et al., Structure of Coked Foams Produced During Pyrolysis and Combustion of Polymers Containing Intumescent Flame Retardant, Vysokomol. Soedin., 1991, vol. 33, no. 7, pp. 1568–1575.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.G. Shuklin, S.V. Buzilov, D.S. Shuklin, 2011, published in Perspektivnye Materialy, 2010, No. 4, pp. 61–65.
Rights and permissions
About this article
Cite this article
Shuklin, S.G., Buzilov, S.V. & Shuklin, D.S. Modified polymers containing carbon nanotubes. Inorg. Mater. Appl. Res. 2, 160–163 (2011). https://doi.org/10.1134/S2075113311020195
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113311020195