Silicate coatings on titanium modified by cobalt and/or copper oxides and their activity in CO oxidation

  • I. V. Lukiyanchuk
  • I. V. Chernykh
  • V. S. Rudnev
  • L. M. Tyrina
  • A. Yu. Ustinov
New Substances, Materials and Coatings

Abstract

SiO2 + TiO2/Ti composites have been formed by plasma electrolytic oxidation (PEO) of titanium in alkaline aqueous solution of sodium silicate. By modifying them using impregnation in nitrate solutions followed by annealing, the oxide composites Co3O4/SiO2 + TiO2/Ti, CuO/SiO2 + TiO2/Ti, and Co3O4 + CuO/SiO2 + TiO2/Ti have been obtained. The latter composites were tested in the model reaction of CO oxidation into CO2. The activation energy has been calculated: for the initial composites, it is equal to 42.6 kJ/mol, whereas, for the composites modified by cobalt oxide, copper oxide, and cobalt/copper oxides, it is equal to 141.8, 86.9, and 97.8 kJ/mol, respectively. The surface morphology and the composition of coatings have been investigated by the methods of scanning electron microscopy, X-ray spectral microprobe analysis, and X-ray photoelectron spectroscopy. Surface morphological structures with the highest concentrations of transition metals, which could serve as catalytically active sites, have been determined: “flakes” (Co3O4), “grains’” (CuO), and “hedgehogs” (Co3O4 +CuO).

Keywords

Cobalt Copper Oxide Cobalt Oxide Plasma Elec Trolytic Oxidation CoCu 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Angelov, S., Mehandjiev, D., Piperov, B., et al., Appl. Catal., 1985, vol. 16, no. 3, pp. 431–437.CrossRefGoogle Scholar
  2. 2.
    Zav’yalova, U.F., Tret’yakov, V.F., Burdeinaya, T.N., et al., Pet. Chem., 2005, vol. 45, no. 4, pp. 255–260.Google Scholar
  3. 3.
    Zhu, J. and Gao, Q., Microporous Mesoporous Mater., 2009, vol. 124, pp. 144–152.CrossRefGoogle Scholar
  4. 4.
    Vodyankin, A.Y., Kurina, L.N., and Shilyaeva, L.P., Russ. J. Appl. Chem., 1999, vol. 72, no. 6, pp. 1079–1080.Google Scholar
  5. 5.
    Kolotilov, S.V., Gavrilenko, K.S., Kantserova, M.R., et al., Theor. Exp. Chem., 2005, vol. 41, no. 6, pp. 347–351.CrossRefGoogle Scholar
  6. 6.
    Baker, J.E., Burch, R., Hibble, S.J., and Loader, P.K., Appl. Catal., 1990, vol. 65, no. 2, pp. 281–292.CrossRefGoogle Scholar
  7. 7.
    Courty, P., Durand, D., Freund, E., and Sugier, A., J. Mol. Catal., 1982, vol. 17, nos. 2–3, pp. 241–254.CrossRefGoogle Scholar
  8. 8.
    Su, J.J., Mao, W., Xu, X.C., et al., AIChE J., 2014, vol. 60, no. 5, pp. 1797–1809.CrossRefGoogle Scholar
  9. 9.
    Formasary, G., Gusi, S., Trifiro, F., and Vaccary, A., Ind. Eng. Chem. Res., 1987, vol. 26, no. 8, pp. 1500–1505.CrossRefGoogle Scholar
  10. 10.
    Zavyalova, U., Nigrovski, B., Pollok, K., et al., Appl. Catal., B, 2008, vol. 83, pp. 221–228.CrossRefGoogle Scholar
  11. 11.
    Lojewska, J., Kolodziej, A., Kapica, R., et al., Catal. Today, 2009, vol. 147, pp. S94–S98.CrossRefGoogle Scholar
  12. 12.
    Galvez, M.E., Ascaso, S., Moliner, R., et al., Top. Catal., 2013, vol. 56, nos. 1–8, pp. 493–498.CrossRefGoogle Scholar
  13. 13.
    Zabuga, V.Y., Tsapyuk, G.G., Ishchenko, O.V., et al., J. Superhard Mater., 2011, vol. 33, no. 5, pp. 315–319.CrossRefGoogle Scholar
  14. 14.
    Stoyanova, D., Christova, M., Dimitrova, P., et al., Appl. Catal., B, 1998, vol. 17, no. 3, pp. 233–244.CrossRefGoogle Scholar
  15. 15.
    Wojciechowska, M., Zielinski, M., Malczewska, A., et al., Appl. Catal., A, 2006, vol. 298, pp. 225–231.CrossRefGoogle Scholar
  16. 16.
    Li, D.B., Liu, X.H., Zhang, Q.H., et al., Catal. Lett., 2009, vol. 127, nos. 3–4, pp. 377–385.CrossRefGoogle Scholar
  17. 17.
    Fierro, G., Lo Jacono, M., Inversi, M., et al., Top. Catal., 2000, vol. 10, pp. 39–48.CrossRefGoogle Scholar
  18. 18.
    Sadykov, V.A., Pavlova, S.N., Bunina, R.V., et al., Kinet. Catal., 2005, vol. 46, no. 2, pp. 227–250.CrossRefGoogle Scholar
  19. 19.
    Popova, N.M., Katalizatory ochistki gazovykh vybrosov promyshlennykh proizvodstv (Catalysts for Purification of Exhaust Gases from Industrial Plants) Moscow: Khimiya, 1991.Google Scholar
  20. 20.
    Avila, P., Montes, M., and Miro, E.E., Chem. Eng. J., 2005, vol. 109, nos. 1–3, pp. 11–36.CrossRefGoogle Scholar
  21. 21.
    Kuzmina, R.I. and Sevost’yanov, V.P., Russ. Chem. J., 2000, vol. 44, no. 1, pp. 71–76.Google Scholar
  22. 22.
    Freund, H.J., Surf. Sci., 2007, vol. 601, pp. 1438–1442.CrossRefGoogle Scholar
  23. 23.
    Hönicke, D., Appl. Catal., 1983, vol. 5, no. 2, pp. 179–198.CrossRefGoogle Scholar
  24. 24.
    Ganley, J.C., Riechmann, K.L., and Seebauer, E.G., J. Catal., 2004, vol. 227, no. 1, pp. 26–32.CrossRefGoogle Scholar
  25. 25.
    Tikhov, S.F., Chernykh, G.V., Sadykov, V.A., et al., Catal. Today, 1999, vol. 53, no. 4, pp. 639–646.CrossRefGoogle Scholar
  26. 26.
    Lebukhova, N.V., Rudnev, V.S., Chigrin, P.G., et al., Surf. Coat. Technol., 2013, vol. 231, pp. 144–148.CrossRefGoogle Scholar
  27. 27.
    Walsh, F.C., Low, C.T.J., Wood, R.J.K., et al., Trans. Inst. Met. Finish., 2009, vol. 87, no. 3, pp. 122–135.CrossRefGoogle Scholar
  28. 28.
    Jiang, B.L. and Wang, Y.M., Plasma electrolytic oxidation treatment of aluminium and titanium alloys, in Surface Engineering of Light Alloys, Dong, H., Ed., Oxford: Wood-Head, 2010, pp. 110–154.CrossRefGoogle Scholar
  29. 29.
    Rudnev, V.S., Prot. Met. Phys. Chem. Surf., 2008, vol. 44, no. 3, pp. 263–272.Google Scholar
  30. 30.
    Curran, J.A. and Clyne, T.W., Acta Mater., 2006, vol. 54, no. 7, pp. 1985–1993.CrossRefGoogle Scholar
  31. 31.
    Vasilyeva, M.S., Rudnev, V.S., Ustinov, A.Yu., et al., Appl. Surf. Sci., 2010, vol. 257, no. 4, pp. 1239–1246.CrossRefGoogle Scholar
  32. 32.
    Ved’, M.V. and Sakhnenko, N.D., Korroz.: Mater., Zashch., 2007, no. 10, pp. 36–40.Google Scholar
  33. 33.
    El-Shobaky, H.G., Appl. Catal., A, 2004, vol. 278, no. 1, pp. 1–9.CrossRefGoogle Scholar
  34. 34.
    Lukiyanchuk, I.V., Chernykh, I.V., Rudnev, V.S., et al., Prot. Met. Phys. Chem. Surf., 2014, vol. 50, no. 2, pp. 209–217.CrossRefGoogle Scholar
  35. 35.
    Grilikhes, S.Yu., Obezhirivanie, travlenie i polirovanie metallov (Metal Degreasing, Etching, and Polishing). Leningrad: Mashinostroenie, 1977.Google Scholar
  36. 36.
    Bobrov, N.N., Leonov, A.S., Belov, A.N., et al., Catal. Ind., 2005, no. 2, pp. 50–58.Google Scholar
  37. 37.
    Dul’nev, A.V., Efremov, V.N., Obysov, M.A., et al., Russ. J. Appl. Chem., 2004, vol. 77, no. 9, pp. 1491–1499.CrossRefGoogle Scholar
  38. 38.
    Vovna, V.I., Gnedenkov, S.V., Gordienko, P.S., et al., Russ. J. Electrochem., 1998, vol. 34, no. 10, pp. 1090–1093.Google Scholar
  39. 39.
    Rudnev, V.S., Vaganov-Vil’kins, A.A., Ustinov, A.Y., and Nedozorov, P.M., Prot. Met. Phys. Chem. Surf., 2011, vol. 47, no. 3, pp. 330–338.CrossRefGoogle Scholar
  40. 40.
    Biesinger, M.C., Payne, B.P., Grosvenor, A.P., et al., Appl. Surf. Sci., 2011, vol. 257, no. 7, pp. 2717–2730.CrossRefGoogle Scholar
  41. 41.
    Espinós, J.P., Morales, J., Barranco, A., et al., J. Phys. Chem. B, 2002, vol. 106, no. 27, pp. 6921–6929.CrossRefGoogle Scholar
  42. 42.
    Satterfield, C.N., Heterogeneous Catalysis in Practice, New York: McGraw-Hill, 1980.Google Scholar
  43. 43.
    Xu, L.P., Sithambaram, S., Zhang, Y.S., et al., Chem. Mater., 2009, vol. 21, no. 7, pp. 1253–1259.CrossRefGoogle Scholar
  44. 44.
    Jiang, X., Zhang, L., Wybornov, S., et al., ACS Appl. Mater. Interfaces, 2012, vol. 4, no. 8, pp. 4062–4066.CrossRefGoogle Scholar
  45. 45.
    Lukiyanchuk, I.V., Rudnev, V.S., Chernykh, I.V., et al., Surf. Coat. Technol., 2013, vol. 231, pp. 433–438.CrossRefGoogle Scholar
  46. 46.
    Patcas, F. and Krysmann, W., Appl. Catal., A, 2007, vol. 316, no. 2, pp. 240–249.CrossRefGoogle Scholar
  47. 47.
    Solov’ev, S.A. and Orlik, S.N., Kinet. Catal., 2009, vol. 50, no. 5, pp. 705–714.CrossRefGoogle Scholar
  48. 48.
    Jia, L., Guo, Y., Tran, T.P., et al., J. Chem. Eng. Jpn., 2012, vol. 45, no. 8, pp. 590–596.CrossRefGoogle Scholar
  49. 49.
    Smith, M.L., Campos, A., and Spivey, J.J., Catal. Today, 2012, vol. 182, no. 1, pp. 60–66.CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2015

Authors and Affiliations

  • I. V. Lukiyanchuk
    • 1
  • I. V. Chernykh
    • 1
  • V. S. Rudnev
    • 1
    • 2
  • L. M. Tyrina
    • 1
  • A. Yu. Ustinov
    • 1
    • 2
  1. 1.Institute of Chemistry, Far East BranchRussian Academy of SciencesVladivostokRussia
  2. 2.Far Eastern Federal UniversityVladivostokRussia

Personalised recommendations