Abstract
Realization of a quality concept and a system qualitative approach to the calculation and design of perspective articles of aeronautical equipment from modern composite materials are key problems for maintaining the quality of the production in aerospace field. A mathematical model for the study of stress–strain state of structurally anisotropic panels from composite materials has been developed. A mathematical model of a reinforcing element during torsional motion at one-side contact with skin has been updated. The effect of the technology on the panel design is considered, namely, residual temperature stresses and preliminary tension of reinforcing fibers. An octic resolving equation and natural boundary conditions have been plotted on the basis of the Lagrange variation principle. A set of exact analytical solutions of boundary problems in single trigonometric series is considered. An application software package has been developed in the MATLAB operating environment. The effect of construction parameters on the degree of stresses and displacements has been analyzed.
Similar content being viewed by others
REFERENCES
P. Cerracchio, M. Gherlone, and A. Tessler, “Real-time displacement monitoring of a composite stiffened panel subjected to mechanical and thermal loads,” Meccanica 50 (10), 2487–2496 (2015).
M. Celkovic, “Thermo-mechanical bending of laminated composite and sandwich plates using layerwise displacement model,” Compos. Struct. 125, 388–399 (2015).
N. I. Baurova and V. A. Zorin, Technological Heredity in the Production of Machine Parts from Polymer Composite Materials. Monograph (Mosk. Avtomob.-Dorozh. Gos. Tekh. Univ., Moscow, 2018) [in Russian].
Yu. I. Dimitrienko and D. O. Yakovlev, “Asymptotic theory of thermoelasticity of multilayer composite plates,” Mekh. Kompozits. Mater. Konstr., No. 2, 259–282 (2014).
O. G. Osyaev, Yu. A. Taturin, A. M. Kostin, and A. V. Zhukov, “Multilevel model for analyzing the strength of structures from polymer composites under multifactorial loading,” Vestn. Donskogo Gos. Tekh. Univ. 11 (5), 613–620 (2011).
M. Petrolo and A. Lamberti, “Axiomatic/asymptotic analysis of refined layer-wise theories for composite and sandwich plates,” Mech. Adv. Mater. Struct. 23 (1), 28–42 (2016).
A. A. Dudchenko, Calculation of the Stress-Strain State of Elements of Aircraft Missile and Machine-Building Structures Made of Composite Materials (Fed. Inf. Sist., Moscow, 2013) [in Russian].
M. I. Martirosov, “Mathematical modeling of deforming and fracture of panels from polymer composite materials using the finite element method,” in Proc. 21 Gorshkov International Symposium Dynamic and Technological Problems of Mechanics of Structures and Continuous Media, Vyatichi, February 16–29, 2015 (2015), Vol. 1, pp. 133–134.
I. A. Buyanov, M. Yu. Rostovtsev, and V. V. Shelofast, “Validation of the system of engineering analysis of composite structures on the example of calculating the natural frequencies of antisymmetric laminate plates,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 4, 149–154 (2016).
T. Yu. Gainutdinova and R. R. Mirkhazov, “Software complex of automated design calculation of thin-walled structures made of composite materials,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 4, 7–11 (2011).
V. I. Khaliulin and V. V. Batrakov, “Analysis of the application of innovative methods for the production of integrated structures made of composites,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 3, 129–133 (2016).
F. A. Urazbakhtin, Yu. Yu. Kharinova, and V. A. Bolonkin, “The limiting states in the process of fiberglass curing,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 3, 79–85 (2015).
S. K. D. Nath and A. M. Afsar, “Analysis of the effect of fiber orientation on the elastic field in a stiffened orthotropic panel under uniform tension using displacement potential approach,” Mech. Adv. Mater. Struct. 16 (4), 300–307 (2011).
A. V. Chernyaev, Discrete optimization of elements of aircraft structures made of composite materials, in Proc. 10th All-Russian Congress on the Fundamental Problems of Theoretical and Applied Mechanics (Nizhny Novgorod, 2011), p. 207.
A. Sh. Kusyakov, “Designing thin plates that work for stability and strength,” Probl. Mekh. Upr., No. 45, 30–38 (2013).
V. V. Chedrik and S. A. Tuktarov, The method of global-local calculation and optimization of aircraft structures made of composite materials, in Proc. 11th All-Russian Congress on the Fundamental Problems of Theoretical and Applied Mechanics (Kazan, 2015), p. 298.
P. A. Shataev, “Calculation of composite structures in the design formulation,” Probl. Nelineinogo Anal. Inzh. Sist. 19 (2), 54–72 (2013).
S. A. Tuktarov and V. V. Chedrik, “Some aspects of modeling the compositional caisson of the large-elongated wing by an anisotropic beam,” Uch. Zap. Tsentr. Aerogidrodin. Inst. 46 (3), 70–84 (2015).
V. I. Khaliulin, P. A. Khilov, and D. M. Toroptsova, “On the prospects for the use of TFP-technology in the production of aircraft composite parts,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 4, 127–132 (2015).
B. V. Boitsov and L. M. Gavva, “Parametric analysis of the stress-strain state of structurally anisotropic panels made of composite materials. A mathematical model,” Kach. Zhizn’, No. 2, 84–89 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. Muravev
Rights and permissions
About this article
Cite this article
Boitsov, B.V., Gavva, L.M. & Pugachev, Y.N. The Stress–Strain State of Structurally Anisotropic Panels from Composite Materials under Force and Process Temperature Exposure. Polym. Sci. Ser. D 12, 85–90 (2019). https://doi.org/10.1134/S1995421219010039
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421219010039