Abstract
Adhesion properties of films of polypyromellitimide modified in a direct-current discharge on the anode are investigated. The peeling strength in when in contact with a series of polymers and with the use of adhesives of different chemical natures is measured using the T-peel test according to ASTM 1876–01. It is shown that the action of a direct current discharge on the films of polypyromellitimide makes it possible to substantially improve the adhesion properties of the polymer to adhesives of different types.
Similar content being viewed by others
References
K. U. Byuller, Heat and Heat Resistant Polymers (Khimiya, Moscow, 1045) [in Russian].
Ya. S. Vygodskii, “Heat-resistant polymers,” in Contemporary Natural Science: Encyclopedia (Magistr-Press, Moscow, 2000), Vol. 6 [in Russian].
I. A. Ronova, V. A. Medvedeva, D. P. Erhard, and H.-W. Schmidt, “Influence of fluorine substitution in polyimides on their physical properties,” in High Technologies in the Industry of Russia. Thin Films in Electronics (Bauman Mosk. Gos. Tekh. Univ., Moscow, 2010), Vol. 16, pp. 290–296 [in Russian].
N. Slepickova-Kasalkova, P. Slepicka, Z. Kolska, and V. Svorcik, “Wettability and other surface properties of modified polymers,” in Wetting and Wettability, Ed. by Aliofkhazraei (INTECH Publ., Moscow, 2015).
R. Wolf, “Plastic surface modification,” in Surface Treatment and Adhesion (Carl Hanser Verlag, Munich, 2016), pp. 61–132.
A. B. Gil’man, R. R. Shifrina, V. K. Potapov, et al., “Changes in the surface properties and structure of polyimide in a glow discharge,” Khim. Vys. Energ. 27 (2), 79–84 (1993).
W. L. Wade, R. J. Mammone, and M. Binder, “Surface properties of commercial polymer films following various gas plasma treatments,” J. Appl. Polym. Sci. 43 (9), 1589–1591 (1991).
T. S. Demina, M. G. Drozdova, M. Y. Yablokov, A. I. Gaidar, A. B. Gilman, D. S. Zaytseva-Zotova, E. A. Markvicheva, T. A. Akopova, and A. N. Zelenetskii, “DC discharge plasma modification of chitosan films: An effect of chitosan chemical structure,” Plasma Process. Polym. 12 (8), 710–718 (2015).
ASTM 1876–2001: Standard Test Method for Peel Resistance of Adhesives (T-Peel Test).
M. S. Piskarev, A. B. Gil’man, A. S. Kechek’yan, and A. A. Kuznetsov, “Adhesive properties of adhesive compounds of polytetrafluoroethylene films modified in low-temperature plasma,” Klei, Germetiki, Tekhnol., No. 10, 15–17 (2016).
RF Patent 2561921 (2014).
Polyimides: A Class of Heat-Resistant Polymers, Ed. by M. I. Bessonov (Nauka, Moscow, 1983) [in Russian].
M. Ghosh and K. Mittal, Polyimides: Fundamentals and Applications (Marcel Dekker, New York, 1996).
A. Gilman, M. Piskarev, M. Yablokov, A. Kechek’yan, and A. Kuznetsov, “Adhesive properties of PTFE modified by DC discharge,” J. Phys. Conf. Ser. 516, 012012 (2014).
A. B. Gilman, M. S. Piskarev, M. Yu. Yablokov, and A. A. Kuznetsov, “Surface modification of polyfluoroolefin films by glow discharge,” Russ. J. Gen. Chem. 85 (5), 1302–1310 (2015).
A. B. Gilman, M. S. Piskarev, A. A. Kuznetsov, and A. N. Ozerin, “Modification of ultrahigh-molecularweight polyethylene by low-temperature plasma (review),” High Energy Chem. 51 (2), 136–144 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.S. Piskarev, A.B. Gil’man, A.S. Kechek’yan, A.A. Kuznetsov, 2018, published in Klei, Germetiki, Tekhnologii, 2018, No. 1, pp. 16–19.
Rights and permissions
About this article
Cite this article
Piskarev, M.S., Gil’man, A.B., Kechek’yan, A.S. et al. Adhesion Properties of Films of Polypyromellitimide Modified in a Direct-Current Discharge. Polym. Sci. Ser. D 11, 239–241 (2018). https://doi.org/10.1134/S1995421218030140
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421218030140