Polymer Science, Series D

, Volume 10, Issue 2, pp 153–155 | Cite as

Vortex-layer devices as import-substituting equipment to produce paints and adhesives

  • V. A. Voitovich
  • M. A. Kart
  • E. A. Zakharychev
  • S. G. Tarasov
Article
  • 15 Downloads

Abstract

It is proposed to use domestically produced vortex layer devices instead of imported bead mills for grinding pigments (and the synthesis of some of them) in the paint industry, for preparation of intermediates of film formers for the reduction of aromatic nitro-compounds to primary amines used as curing agents for epoxy oligomers, in the synthesis of dyes, etc. It is shown that using these devices results in not only technological advantages over bead mills, but will also allow us to replace some types of imported raw materials.

Keywords

vortex-layer devices bead mills beads dispersing paints adhesives import substitution 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    I. P. Kazakov and M. V. Krylova, “The crystal structure and mechanical properties of the beads based on zirconium,” Lakokras. Prom-st., Nos. 1–2, 34 (2014).Google Scholar
  2. 2.
    Jpn. Patent No. 20817/63 (1963).Google Scholar
  3. 3.
    D. D. Logvinenko and V. S. Moroz, “Recovery of nitro-compounds under agitation in a vortex layer of ferromagnetic particles,” in Theory and Practice of Mixing in Liquid Media (NIITEKhIM, Moscow, 1973) [in Russian].Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2017

Authors and Affiliations

  • V. A. Voitovich
    • 1
  • M. A. Kart
    • 1
  • E. A. Zakharychev
    • 1
  • S. G. Tarasov
    • 1
  1. 1.Research Institute for ChemistryLobachevsky State University of Nizhny NovgorodNizhny NovgorodRussia

Personalised recommendations