Abstract
Properties of epoxy-polysulfon film adhesives are presented: resistance to temperature, water, and artificial tropical conditions; endurance; and resistance to vibration and climate. It is shown that modification by polysulfons allows improving the adhesion and physical and mechanical properties of epoxy adhesives.
Similar content being viewed by others
References
D. V. Grashchenkov and L. V. Chursova, “A strategy for development of polymer composites and functional materials,” Aviats. Mater. Tekhnol., No. S, 231–242 (2012).
L. A. Dement’eva, A. A. Serezhenkov, N. F. Lukina, and K. E. Kutsevich, “Adhesive prepregs and laminates based on them,” Aviats. Mater. Tekhnol., No. 2, 19–21 (2013).
E. N. Kablov, “Innovations of VIAM as part of implementing the Strategic Directions of Development of Materials and Technologies of Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015).
E. N. Kablov, “Strategic directions of development of materials and technologies for their processing for the period up to 2030,” Aviats. Mater. Tekhnol., No. S, 7–17 (2012).
S. A. Karimova, T. G. Pavlovskaya, and A. P. Petrova, “Preparation of the surface of aluminum alloys using anodic oxidation,” Klei. Germetiki. Tekhnol., No. 1, 34–38 (2014).
T. A. Kirienko, N. F. Lukina, K. E. Kutsevich, and A. P. Petrova, “A study of the rheological properties of adhesive binders,” Polym. Sci., Ser D 9 (3), 295–297 (2016).
K. E. Kutsevich, L. A. Dement’eva, N. F. Lukina, and L. V. Chursova, “The properties and use of a VK-36RM adhesive for aircraft engineering,” Polym. Sci., Ser D 7 (2), 112–114 (2014).
N. F. Lukina, L. A. Dement’eva, A. P. Petrova, and A. A. Serezhenkov, “Structural and heat-resistant adhesives,” Aviats. Mater. Tekhnol., No. S, 328–335 (2012).
Yu. I. Merkulova, R. R. Mukhametov, V. G. Zheleznyak, and A. M. Safronov, “Modified matrix polyisocyanates,” Klei. Germetiki. Tekhnol., No. 10, 2–6 (2014).
A. P. Petrova, N. F. Lukina, L. A. Dement’eva, I. A. Avdonina, T. Yu. Tyumeneva, and N. S. Zhadova, “Adhesives in aircraft,” RZhKh 54 (1), 46–52 (2010).
A. P. Petrova, L. A. Dement’eva, N. F. Lukina, and L. I. Anikhovskaya, “Film structural adhesives,” Polym. Sci., Ser D 8 (2), 138–143 (2015).
A. P. Petrova and N. F. Lukina, “Application of adhesion coats and systems of surface modification during gluing,” Polym. Sci., Ser D 7 (3), 177–180 (2014).
A. P. Petrova, “Main stages of gluing technology,” Polym. Sci., Ser D 7 (4), 293–297 (2014).
A. P. Petrova, N. F. Lukina, and I. A. Sharova, “Assessment of strength of adhesive joints made with epoxy adhesives under the influence of different factors,” Polym. Sci., Ser D 7 (3), 228–232 (2014).
I. A. Sharova and A. P. Petrova, “The review of the proceedings of the International Conference on Adhesives and Sealants WAC-2012,” Tr. VIAM, No. 8 (2013). http://www.viam-works.ru. Cited April 14, 2016.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © L.A. Dement’eva, K.E. Kutsevich, N.F. Lukina, E.V. Rubtsova, A.P. Petrova, 2016, published in Klei, Germetiki, Tekhnologii, 2016, No. 11, pp. 13–18.
Rights and permissions
About this article
Cite this article
Dement’eva, L.A., Kutsevich, K.E., Lukina, N.F. et al. Properties of an epoxy structural film adhesive modified by polysulfones. Polym. Sci. Ser. D 10, 143–149 (2017). https://doi.org/10.1134/S1995421217020058
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421217020058