Abstract
The system of classification of the main types of automatic control systems for curing regimes of the products made of polymeric composite materials has been examined. The methods of formation of control signals have been determined. The means of controlling and taking into account exothermic effects arising in the curing process on the accuracy of controlling the temperature-time regimes of the technological processes have been studied. Hybrid composite materials based on epoxy binder with carbon and organic fibrous fillers used in rocket and space production have been considered as objects of study.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
V. A. Nelyub, “Technology for production of parts of power transmission towers of epoxy resins by winding,” Klei, Germetiki, Tekhnol., No. 6, 25–29 (2012).
V. A. Nelyub, D. V. Grashchenkov, D. I. Kogan, and I. A. Sokolov, “The use of direct methods of extrusion in the production of large fiberglass parts,” Khim. Tekhnol., No. 12, 735–739 (2012).
I. A. Aleksandrov, G. V. Malysheva, V. A. Nelyub, I. A. Buyanov, I. V. Chudnov, and A. S. Borodulin, “A study of fracture surfaces of carbon plastics produced by melt and mortar technology,” Vse Mater., No. 3, 7–12 (2012).
A. N. Muranov, G. V. Malysheva, V. A. Nelyub, I. A. Buyanov, I. V. Chudnov, and A. S. Borodulin, “investigation of properties of polymeric composition materials around a heterogeneous matrix,” Polym. Sci., Ser. D 6 (3), 256–259 (2013).
I. V. Chudnov, E. Sh. Akhmetova, and G. V. Malysheva, “Features of investigation of the properties of hybrid polymer binders by differential scanning calorimetry,” Materialovedenie, No. 5, 22–25 (2013).
K. V. Zhuravleva, M. A. Shevtsova, and G. V. Malysheva, “Calculation of the aircraft wing structure element made of polymer composite materials,” Entsikl. Inzh.Khim., No. 8, 27–30 (2013).
V. A. Zorin, N. I. Baurova, and A. M. Shakurova, “Control of microstructure and properties of filled polymer compositions,” Polym. Sci., Ser. D 6 (1), 36–40 (2013).
R. A. Lanikhin and G. V. Malysheva, “Repair of vehicle radiators,” Polym. Sci., Ser. D 3 (2), 147–150 (2010).
G. V. Malysheva and N. V. Bodrykh, “Hot-melt adhesives,” Polym. Sci., Ser. D 4 (4), 301–303 (2011).
T. A. Guzeva, “Methods for assessing the performance properties of polymeric composite materials,” VseMater., No. 3, 17–19 (2014).
T. A. Guzeva, “New approaches to improve the efficiency of the production of parts from organic plastics,” Vse Mater., No. 7, 53–56 (2012).
T. A. Guzeva, “Microwave heating as a way to intensify the curing processes in binders,” Klei, Germetiki, Tekhnol., No. 12, 41–43 (2013).
S. M. Mezhikovskii, Physical Chemistry of Reactive Oligomers: Thermodynamics, Kinetics, and Structure (Nauka, Moscow, 1998) [in Russian].
V. A. Fel’dman et al., Theoretical Foundations of Communication and Management (Izd-vo fiziko-matematicheskoi literatury, Moscow, 1963) [in Russian].
T. Yu. Tsibizova and S. F. Fam, “Methods for constructing of mathematical models: Genetic algorithms,” in Proceedings of the International Scientific and Practical Conference Achievements of University Science, September 15–20 (IIU MGOU, Moscow, 2014), Part 2, pp. 158–162.
S. L. Bazhenov, A. A. Berlin, A. A. Kul’kov, and V. G. Oshmyan, Polymer Composite Materials (ID Intellekt, Dolgoprudnyi, 2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © T.Yu. Tsibizova, T.A. Guzeva, 2015, published in Klei. Germetiki. Tekhnologii, 2015, No. 5, pp. 35–40.
Rights and permissions
About this article
Cite this article
Tsibizova, T.Y., Guzeva, T.A. Automatic control systems for technological processes of curing products made of polymeric composites. Polym. Sci. Ser. D 9, 22–26 (2016). https://doi.org/10.1134/S1995421215040164
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421215040164