Abstract
Modification of epoxy oligomer by thermostable thermoplastics—polysulfon, polyethersulfon, and polyetherimide—has been carried out. The adhesion properties of the obtained compositions to steel have been studied. It has been shown that introduction of thermoplastic modifiers results in an increase of adhesion strength on the polymer-metal interface. Possible reasons for the observed phenomena are discussed.
Similar content being viewed by others
References
R. D. Brooker, A. J. Kinloch, and A. C. Taylor, J. Adhesion 86, 726–741 (2010).
N. Yu. Budylin, A. V. Shapagin, A. E. Chalykh, and R. R. Khasbiullin, “Simulation of the formation of gradient dispersed structures in mixtures of thermal and thermosetting plastics,” Plast. Massy, No. 3, 51–56 (2011).
V. I. Solodilov, R. A. Korokhin, Yu. A. Gorbatkina, and A. M. Kuperman, Khim. Fiz. 31(6), 63 (2012).
Y. A. Gorbatkina, I. Y. Gorbunova, and M. L. Kerber, Polym. Sci. Ser. D 4(2), 95–101 (2011).
O. V. Akhmatova, Yu. A. Gorbatkina, I. Yu. Gorbunova, et al., Plast. Massy, No. 10, 31–35 (2012).
Y. A. Gorbatkina and V. G. Ivanova-Mumjieva, Polym. Sci. Ser. D 2(4), 214–216 (2009).
E. Kinloch, Adhesion and Adhesives: Science and Technology (Mir, Moscow, 1991) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.A. Gorbatkina, R.I. Sopotov, I.Yu. Gorbunova, V.G. Ivanova-Mumzhieva, M.L. Kerber, V.A. Koroteev, 2015, published in Klei. Germetiki. Tekhnologii, 2015, No. 1, pp. 16–20.
Rights and permissions
About this article
Cite this article
Gorbatkina, Y.A., Sopotov, R.I., Gorbunova, I.Y. et al. Comparison of various methods of estimation of the durability of connections of modified epoxy polymer-solid body. Polym. Sci. Ser. D 8, 181–184 (2015). https://doi.org/10.1134/S1995421215030041
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421215030041