Abstract
The S-band accelerating module under development at the Budker Institute of Nuclear Physics has been designed with a beam energy of up to 200 MeV and is aimed at optimizing costs of the injector of the c-τ-factory. An injector equipped with a set of such modules will be able to produce the required beam energy. The module includes the following equipment: a klystron with a modulator and a control system, a power compressor, phase shifters, four accelerating sections, the loads, and waveguide elements. This module can be used in scientific and production facilities where linear accelerators are required.
Similar content being viewed by others
References
V. M. Pavlov, “Power multiplication system of SLED,” INPh Preprint No. 97–94 (Inst. Nucl. Phys., Novosibirsk, 1997).
A. V. Aleksandrov et al., “Testing the prototype of the VEIP-5 foretector,” INPh Preprint No. 97–64 (Inst. Nucl. Phys., Novosibirsk, 1997).
V. E. Akimov et al., “Modulators for powering powerful pulse klystrons of centimeter range,” Vopr. At. Nauki Tekh., Ser.: Yad.-Fiz. Issled., Nos. 4–5, 21–23 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Barnyakov, A.E. Levichev, I.L. Pivovarov, S.L. Samoylov, 2018, published in Pis’ma v Zhurnal Fizika Elementarnykh Chastits i Atomnogo Yadra, 2018.
Rights and permissions
About this article
Cite this article
Barnyakov, A.M., Levichev, A.E., Pivovarov, I.L. et al. 200 MeV S-Band Accelerating Module. Phys. Part. Nuclei Lett. 15, 923–925 (2018). https://doi.org/10.1134/S1547477118070130
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1547477118070130