Flat-top system of the DC-280 cyclotron
- 45 Downloads
The flat-top cavity of the radio-frequency accelerating system designed at the Flerov Laboratory of Nuclear Reactions, Joint Institute for Nuclear Research, for the DC-280 cyclotron is described. The cyclotron is intended for increasing the capabilities and efficiency of experiments on the synthesis of super-heavy elements and an investigation of their nuclear physical and chemical properties. The DC-280 isochronous heavy-ion cyclotron will produce accelerated beam of ions in the range from neon to uranium. The parameters, design, and results of the experimental and 3D computer modeling of the flat-top cavity of the RF accelerating system of the DC-280 cyclotron are reported.
KeywordsNucleus Letter Voltage Amplitude Energy Spread Resonator Geometry Angular Length
Unable to display preview. Download preview PDF.
- 1.G. Gulbekyan et al., “Status report and future development FLNR JINR heavy ions accelerators complex,” in Proc. of 11th Intern. Conf. on Heavy Ion Acc. Technol., Venezia, Italy, June 8–12, 2009, p. 59.Google Scholar
- 2.G. G. Gulbekyan, “A project of DC-280 high-intensity heavy ion cyclotron,” in Proceedings of the IX International Workshop on Charged Particles Accelerator Problems in the Memory of V. P. Sarantsev, Alushta, Ukraine, September 17–21, 2011.Google Scholar
- 3.Hatanaka K. et al., “RCNP cyclotron facility,” in Proc. of 11th Intern. Conf. on Heavy Ion Acc. Technol., Venezia, Italy, June 8–12, 2009, p. 64.Google Scholar
- 4.J. G. de Villiers et al., “A flat-topping system for the separated sector cyclotron at iThemba LABS,” in Proc. of XVII Intern. Conf. on Cyclotron and Their Appl., Tokyo, Oct. 18–22, 2004.Google Scholar