Abstract
The Hadron Calorimeter of the ATLAS spectrometric complex is a principal part of the whole setup. This paper describes the developed concept and methods for the controlled construction of a steel nuclear calorimeter absorber which provides calorimeter assembly on the surface and in the underground experimental hall meeting the required design tolerances.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ATLAS Collab., “ATLAS Technical Proposal for a General-Purpose pp Experiment at the Large Hadron Collider,” CERN/LHCC/94-93 (Geneva, 1994).
ATLAS Collab., “ATLAS Tile Calorimeter Technical Design Report,” ATLAS TDR 3, CERN/LHCC/96-42 (Geneva, 1996).
P. Amaral et al., “Hadronic Shower Development in Iron-Scintillator Tile Calorimetry,” Nucl. Instrum. Methods Phys. Res. A 443, 51–70 (2000).
B. A. Alikov et al. “ATLAS Barrel Hadron Calorimeter General Manufacturing Concepts for 300000 Absorber Plates Mass Production,” JINR E13-98-135 (Dubna, 1998).
V. Yu. Batusov et al., “ATLAS Hadron Tile Calorimeter: Experience in Prototype Construction and Module Mass Production,” Fiz. Elem. Chastits At. Yadra 37, 1484 (2006) [Phys. Part. Nucl. 37, 785 (2006)].
V. Batusov et al., “High Precision Laser Control of the ATLAS Tile-Calorimeter Module Mass Production at JINR,” Part. Nucl. Lett., No. 2[105], 33–40 (2001).
J. Budagov et al., “ATLAS Barrel Hadron Calorimeter 0-Module Assembly Technology,” JINR Commun. E13-97-23. Dubna, 1997; ATLAS Internal Note TILECALNO-94.
M. N. Ivanov, Machine Elements (Vyssh. Shkola, Moscow, 1984) [in Russian].
V. Batusov et al., “EBC Pre-assembly Geometry,” CERN Internal Report ATL-LE-UR-0042; https://edms.cern.ch/file/382969/3/Tile-64Modules_1631.pdf.
V. Batusov et al., “Development and Application of High-precision Metrology for the ATLAS Tile-Calorimeter Construction,” JINR Preprint E13-2004-177 (Dubna, 2004).
V. Batusov et al., “Barrel Pre-assembly Geometry,” CERN Internal Report ATL-LB-UR-0038; https://edms.cern.ch/file/414092/1/TileBarrel-64M_4531.pdf.
V. Batusov et al., “Barrel Assembly Geometry,” CERN Internal Report ATL-LB-UR-0054; https://edms.cern.ch/file/548528/2/Tile_LAr_B_0151.pdf
V. Batusov et al., “EBC Assembly Geometry,” CERN Internal Report ATL-LE-UR-0059; https://edms.cern.chfile/704536/1/EBC64_ECC_0561.pdf
V. Batusov et al., “EBA Assembly Geometry,” CERN Internal Report ATL-LE-UR-0065; https://edms.cern.ch/file/743380/1/EBA64_ECA_SaddleSyst_2261.pdf.
J. Abdallah et al., “Design, Construction and Installation of the ATLAS Hadronic Barrel Scintillator-Tile Calorimeter,” CERN ATLAS note ATL-TILECAL-PUB-2008-001 (2008).
Author information
Authors and Affiliations
Additional information
Original Russian Text © V. Batusov, Yu. Budagov, R. Leitner, M. Lyablin, L. Miralles, M. Nessi, J. Proudfoot, N. Russakovich, A. Sissakian, N. Topilin, D. Khubua, A. Enrique, V. Romanov, 2009, published in Pis’ma v Zhurnal Fizika Elementarnykh Chastits i Atomnogo Yadra, 2009, No. 4 (151), pp. 548–565.
Rights and permissions
About this article
Cite this article
Batusov, V., Budagov, Y., Leitner, R. et al. The module nuclear absorber of the ATLAS Hadron Calorimeter (An experiment of controlled assembly on the surface and underground). Phys. Part. Nuclei Lett. 6, 337–347 (2009). https://doi.org/10.1134/S1547477109040098
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1547477109040098