Abstract
The literature, patent, and authors’ data on procedures for preparing self-healing polymer paint and varnish coatings are summarized. “External” and “internal” routes of preparing such coatings, in particular, microencapsulation technologies and procedures based on specific rheological properties of polymers, are analyzed in detail. It is concluded that the efficiency of the encapsulation method for preparing coatings is low. Prospects for using polyurethane and thermoplastic film-forming agents for preparing self-healing polymer paint and varnish coatings are demonstrated.
Similar content being viewed by others
References
Kaku, M., Physics of the Future, New York: Doubleday, 2011.
Hager, M.D., Vanoer Zwang, and Shubert, S., Self-Healing Materials, Springer, 2016.
Ghosh, S.K., Self-Healing Materials: Fundamentals, Design Strategies, and Applications, Weinheim: Wiley-VCH, 2008.
Grebeneva, T.A., Terekhov, I.V., Chursova, L.V., Shlenskii, V.A., Gorbanova, T.E., Dolzhenkova, Ya.S., and Dyatlov, V.A., Klei., Germet., Tekhnol., 2016, no. 10, pp. 40–46.
Grebeneva, T.A., Terekhov, I.V., Chursova, L.V., Shlenskii, V.A., Gorbanova, T.E., Dolzhenkova, Ya.S., and Dyatlov, V.A., Klei., Germet., Tekhnol., 2016, no. 11, pp. 39–46.
Kessler, M.R., Sottos, N.R., and White, S.R., Appl. Sci. Manufact., 2003, vol. 34, no. 8, pp. 743–753.
Yang, Y. and Urban, M.W., Chem. Soc. Rev., 2013, vol. 42, no. 17, pp. 7446–7467.
Bei Qian, Zuwei Song, Long Hao, Wei Wang, and Debing Kong, J. Electrochem. Soc., 2017, vol. 164, no. 2, pp. 54–60.
White, S.R., Sottos, N.R., Geubelle, P.H., Moore, J.S., Kessler, M.R., Sriram, S.R., Brown, E.N., and Viswanathan, S., Nature, 2001, vol. 409, pp. 794–797.
Patent US 6858659, Publ. 2001.
Patent US 6518330, Publ. 2002.
Soo Hyoun Cho, Andersson, M., White, S.R., Sottos, N.R., and Braun, P.V., Adv. Mater., 2006, vol. 18, pp. 997–1000.
Coope, T.S., Mayer, U.F.J., Wass, D.F., Trask, R.S., and Bond, I.P., Adv. Funct. Mater., 2011, vol. 21, pp. 4624–4631.
Huang, M. and Yang, J., J. Mater. Chem., 2011, vol. 21, no. 30, pp. 11123–11130.
Yang, J., Keller, M.W., Moore, J.F., White, S.R., and Sottos, N.R., Macromolecules, 2008, vol. 41, no. 24, pp. 9650–9655.
Caruso, M.M., Delafuente, D.A., Ho, V., Sottos, N.R., Moore, J.S., and White, S.R., Macromolecules, 2007, vol. 40, pp. 8830–8832.
Blaiszik, B.J., Caruso, M.V., and Mellroy, D.A., Polymer, 2009, vol. 50, pp. 990–997.
Caruso, M.M., Blaiszik, B.J., White, S.R., Sottos, N.R., and Moore, J.S., Adv. Funct. Mater., 2008, vol. 18, pp. 1898–1904.
Neuser, S. and Michaud, V., Exp. Mech., 2014, vol. 54, pp. 293–304.
Yin, T., Rong, M.Z., Zhang, M.Q., and Yang, G.C., Composites Sci. Technol., 2007, vol. 67, pp. 201–212.
Yuan, Y.C., Rong, M.Z., Zhang, M.Q., Chen, J., Yang, G.C., and Li, X.M., Macromolecules, 2008, vol. 41, pp. 5197–5202.
Yuan, Y.C., Rong, M.Z., Zhang, M.Q., Yang, G.C., and Zhao, J.Q., Express Polym. Lett., 2011, vol. 5, pp. 47–59.
Liu, X., Zhang, H., Wang, J., Wang, Z., and Wang, S., Surf. Coat. Technol., 2012, vol. 206, pp. 4976–4980.
Li, Q., Mishra, A.K., Kim, N.H., Kuila, T., Lau, K., and Lee, J.H., Composites, Part B: Engineering, 2013, vol. 49, pp. 6–15.
Li, Q., Siddaramaiah, Kim, N.H., Hui, D., and Lee, J.H., Composites, Part B: Engineering, 2013, vol. 55, pp. 79–85.
Meng, L.M., Yuan, Y.C., Rong, M.Z., and Zhang, M.Q., J. Mater. Chem., 2010, vol. 20, no. 29, pp. 5969–6196.
Jin, H.H., Mangun, C.L., Stradley, D.S., Moore, J.S., Sottos, N.R., and White, S.R., Polymer, 2012, vol. 53, no. 2, pp. 581–587.
Stankiewicz, A., Szczygiel, I., and Szczygiel, B., J. Mater. Sci., 2013, vol. 48, pp. 8041–8051.
Suryanarayana, C., Chowdoji Rao, K., and Kumar, D., Prog. Org. Coat., 2008, vol. 63, pp. 72–78.
Jadhav, R.S., Hundiwale, D.G., and Mahulikar, P.P., J. Appl. Polym. Sci., 2011, vol. 119, no. 5, pp. 2911–2916.
Samadzadeh, M., Boura, S.H., Peikari, M., Ashrafi, A., and Kasiriha, M., Prog. Org. Coat., 2011, vol. 70, no. 4, pp. 383–387.
Patent RU 2358036, Publ. 2009.
Baghdachi, J., Eur. Coat. J., 2010, vol. 9, pp. 17–23.
Fischer, W., Klimmasch, W., Kuczewski, H., Mechtel, M., Melchiors, M., Juva, N., Tejada, E., Almato, M., Vega, B., and Bulanov, M.N., Lakokras. Prom–st., 2011, no. 9, pp. 40–45.
Müller, B. and Poth, U., Coatings Formulation, Vincentz, 2006.
Soo Hyon Cho, White, S., and Braun, P., Adv. Mater., 2009, vol. 21, pp. 645–649.
Patent US 5798409A, Publ. 1998.
Patent CN 104356338, Publ. 2014.
Rule, J., Brown, E.N., and Sottos, N.R., Adv. Mater., 2005, vol. 72, pp. 205–208.
Zhao, Y., Fickert, J., Landfester, K., and Crespy, D., Small, 2012, vol. 8, pp. 2954–2958.
Solodovnik, V.D., Mikrokapsulirovanie (Microencapsulation), Moscow: Khimiya, 1980.
Blaiszik, B.J., Sottos, N.R., and White, S.R., Composites Sci. Technol., 2008, vol. 68, pp. 978–986.
Patent US 20110057340A1, Publ. 2008.
Noh, H.H. and Lee, J.K., Express Polym. Lett., 2013, vol. 7, pp. 88–94.
Bergman, S.D. and Wudl, F., J. Mater. Chem., 2008, vol. 18, pp. 41–62.
Pakhomov, S.I., Trifonov, I.P., and Burmistrov, V.A., Polivinilkhloridnye kompozitsii (Polyvinyl Chloride Compounds), Ivanovo: Ivanov. Gos. Khim.-Tekhnol. Univ., 2011.
Badmaev, M.A., Kvasnikov, M.Yu., and Fedyakova, N.V., Lakokras. Prom–st., 2018, no. 3, p. 28.
Author information
Authors and Affiliations
Corresponding author
Additional information
Russian Text © The Author(s), 2019, published in Zhurnal Prikladnoi Khimii, 2019, Vol. 92, No. 5, pp. 656–667.
Rights and permissions
About this article
Cite this article
Kvasnikov, M.Y., Makarov, A.V., Silaeva, A.A. et al. Self-Healing Paint and Varnish Polymer Coatings. Russ J Appl Chem 92, 689–700 (2019). https://doi.org/10.1134/S1070427219050161
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427219050161