Abstract
The structure diagram and operation of a combination unit for drilling and initiating slotting are presented. The loads on the cuttier during initiating slotting are calculated, and the rational operating mode of the hybrid unit is determined.
Similar content being viewed by others
References
Kishin, V.I., Kurlenya, M.V., and Pisarenko, M.V., Improvement of Geotechnologies and Rock Mass Condition Management Based on Hydraulic Fracturing, GIAB, 2013, no. 6, pp. 23–35.
Chernov, O.I., Abramova, O.A., Theoretical Study of Tension-Induced Rock Failure Under Various Slit-Loading Schemes in a Mass, J. Min. Sci., 1994, vol. 30, no. 2, pp. 141–147.
Klishin, V.I., Kokoulin, D.I., Hydraulic Coal Seam Fracturing Method, RF patent no. 2472941, Byull. Izobret., 2013, no. 2.
Lekontsev, Yu.M., Sazhin, P.V., Directional Hydraulic Fracturing in Difficult Caving Roof Control and Coal Degassing, J. Min. Sci., 2014, vol. 50, no. 5, pp. 914–917.
Lekontsev, Yu.M., Sazhin, P.V., Salikhov, A.F., and Isambetov, V.F., Expanding the Scope of the Directional Hydraulic Fracturing Method, Ugol’, 2014, no. 4, pp. 18–21.
Dubynin, N.G., Volodarskaya, Sh.G., Yanovskaya. N.B., and Yanovsky, B.G., Influence of Blast-Hole Shape on Efficiency of Explosion of the Charges, J. Min. Sci., 1974, vol. 10, no. 6, pp. 747–749.
Lekontsev, Yu.M., Patutin, A.V., Sazhin, P.V., and Temiryaeva, O.A., Hybrid Unit for Directional Hydrofracturing, J. Min. Sci., 2016, vol. 52, no. 3, pp. 511–515.
Protasov, Yu.I., Razrushenie gornykh porod (Rock Failure), Moscow: MSMU, 2009.
Neskromnykh, V.V., Borisov, K.I., Analytical Study of the Process of Cutting and Chipping of Rocks, Izv. TPU, 2013, vol. 323, no. 1, pp. 191–195.
Borisov, K.I., Rock Cutters Dynamics in the Course of Rock Breaking with Cutting and Chipping Tools of PDC Type, Izv. TPU, 2010, vol. 317, no. 1, pp. 161–164.
Rubtsov, V.L., Borisov, K.I., Experimental Study of Power Characteristics at PDC Rock Cutting and Chipping, Inzh. Neft., 2014, no. 2, pp. 9–11.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © P.V. Sazhin, 2018, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2018, No. 2, pp. 181–186.
Rights and permissions
About this article
Cite this article
Sazhin, P.V. Research of Operating Mode and Geometric Parameters of Combination Unit Cutter in Initiating Slotting. J Min Sci 54, 347–351 (2018). https://doi.org/10.1134/S1062739118023726
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739118023726