Abstract
The research data on the technology of manufacturing adjoining parts of valves meant to create required sealing of high-pressure drilling unit cylinders are reported in the article. The serviceability of the new design tools made of superhard composite 10 in cutting out adjoining parts from steel and plastic and in efficient shock absorption of vibrations during cutting-out has been proved. The achieved process result ensures enhanced quality of manufacturing and running efficiency of pneumatic drilling machines.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Kudryashov, E A., Pavlov, E.V., and Lunin, D.Yu., Validated Methods of Parts Machining for Nonleaking Hydraulic Cylinders in Drilling Installations, J. Min. Sci., 2012, vol. 48, no. 5, pp. 870–873.
Kudryashov, E.A., Technology of Cutting of Parts of Higher Structural Complexity, Proc. Int. Sci.–Tech. Conf: Fundamental and Applied Problems of Machine Engineering Technology–2003, Orel: OrGTU, 2003, pp. 209–213.
Kudryashov, E.A. and Nikonov, A.M., Cutting of Parts Made of Different Constructional Materials by a Composite Tool, STIN, 2008, no. 12, pp. 26–28.
Emel’yanov, S.G., Kudryashov, E.A., Nikonov, A. M., and Loktionova, O. G., Processing of Assemblies of Dissimilar Materials by a Composite Tool, Trudy Arsent. Tekhnol. Inst. DVGTU, Arsent’ev: ArTI DVGTU, 2009, issue 2, pp. 12–17.
Smirnov, I.M., Povyshenie effektivnosti iprotsessov mekhanicheskoi obrabotki konstruktivno slozhnykh detalei mashin (Enhancing Efficiency of Cutting of Structurally Complex Parts), Moscow: Triumf, 2012.
Kudryashov, E.A. and Smirnov, I.M., Classification of Structurally Complex Surfaces of Parts as Preparation for Development of a Mechanical Treatment Technology, Fund. Prikl. Probl. Tekhn. Tekhnol., 2015, no. 2 (310), pp. 89–94.
Kudryashov, E.A., Smirnov, I.M., and Lebedinsky A.E.., Searching Optimal Solutions in the Mechanical Treatment Process Design, Sistemy. Metody. Tekhnol., 2014, no. 3 (23), pp. 94–98.
Kudryashov, E.A., Smirnov, I.M., and Yatsun, E.I., Search of Ultimate Solutions in the Design of Machining Processes, Naukoem. Tekhnol. Mashinostr., 2014, no. 12 (42), pp. 10–14.
Malykhin, V.V., Yatsun, E.I., and Novikov, S.G., Vibroacoustic Diagnostics of the Cutting Tool and the Machined Surface Microroughness, Sprav. Inzh. Zh., 2014, no. 4, pp. 31–35.
Kudryashov, E.A., Yatsun, E.I., Pavlov, E.V., and Remnev, A.I., Methodology of Formation of a Cutting Edge for Energy-Saving Combination Tools, Proc. 18th Int. Sci.–Tech. Conf.: Machine Engineering and Technosphere in the 21st Century, 2011, vol. 3, pp. 231–234.
Malykhin, V.V., Yatsun, E.I., and Novikov, S.G., Improving Performance of Damping Cutters, Izv. YuZGU, Series: Technique and Technology, 2012, no. 2, pp. 43–46.
Novikov, S.G., Malykhin, V.V., Kudryashov, E.A., Yatsun, E.I., and Pavlov, E.V., Enhancing Stability of Cutting with a Damping Cutter, Izv. YuZGU, 2011, no. 3 (36), pp. 122–125.
Yatsun, E.I. et al., RF patent no. 2457077, Byull. Izobret., 2012, no.21.
Novikov, S.G., et al., RF patent no. 2457078, Byull. Izobret., 2012, no.21.
Novikov, S.G., et al., RF patent no. 2479385, Byull. Izobret., 2011, no. 11.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.A. Kudryashov, E.V. Pavlov, I.M. Smirnov, 2017, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2017, No. 3, pp. 65–69.
Rights and permissions
About this article
Cite this article
Kudryashov, E.A., Pavlov, E.V. & Smirnov, I.M. Justification of Damping Cutter Design for Making Parts for High-Pressure Drilling Unit Cylinders. J Min Sci 53, 484–488 (2017). https://doi.org/10.1134/S1062739117032403
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739117032403