Skip to main content
Log in

Distribution of liquid velocity in the experimental model of a fuel assembly with a spacer grid

  • Published:
Thermophysics and Aeromechanics Aims and scope

Abstract

Distribution of liquid velocity and its pulsations were measured in the space between fuel elements of the 7-rod experimental model of the fuel assembly of nuclear power plants at Reynolds numbers of 8000, 16000, and 24000. The influence of the spacer grid on distribution of the axial component of liquid velocity was determined. It is shown that the relative values of liquid velocity and its pulsations do not depend on the Reynolds number and they are determined by the distance from the spacer grid.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. M.V. Holloway, M.E. Conner, H.L. McClusky, and D.E. Beasley, The effect of support grid features on local, single-phase heat transfer measurements in rod bundles, J. Heat Transfer, 2004, Vol. 126, No. 1, P. 43–53.

    Article  Google Scholar 

  2. K. Rehme and G. Trippe, Pressure drop and velocity distribution in rod bundles with spacer grids, Nuclear Engng and Design., 1980, Vol. 62, Nos. 1–3, P. 349–359.

    Article  Google Scholar 

  3. O.N. Kashinskii, P.D. Lobanov, N.A. Pribaturin, A.S. Kurdyumov, and S.E. Volkov, Experimental study of the effect of spacer grid on the flow structure in fuel assemblies of the AES 2006 reactor, Thermal Engng, 2013, Vol. 60, Iss. 1, P. 62–66.

    Article  ADS  Google Scholar 

  4. S.M. Dmitriev, S.S. Borodin, M.A. Legchanov, D.N. Solntsev, V.D. Sorokin, and A.E. Khrobostov, Experimental studies of hydrodynamic and mass-transfer properties of coolant flow in VVER fuel assemblies TVSA, Atomic Energy, 2012, Vol. 113, No. 5, P. 314–319.

    Article  Google Scholar 

  5. S.M. Dmitriev, D.V. Doronkov, M.A. Legchanov, A.N. Pronin, D.N. Solncev, V.D. Sorokin, and A.E. Hrobostov, Investigating hydrodynamic characteristics and peculiarities of the coolant flow behind a spacer grid of a fuel rod assembly of the flaotingnuclear power unit, Thermophysics and Aerodynamics, 2016, Vol. 23, No. 3, P. 369–378.

    ADS  Google Scholar 

  6. S.K. Chang, S.K. Moon, W.P. Baek, and Y.D. Choi, Phenomenological investigations on the turbulent flow structures in a rod bundle array with mixing devices, Nuclear Engng and Design, 2008, Vol. 238, No. 3, P. 600–609.

    Article  Google Scholar 

  7. E.E. Dominguez-Ontiveros, Y.A. Hassan, M.E. Conner, and Z. Karoutas, Experimental benchmark data for PWR rod bundle with spacer-grids, Nuclear Engng and Design., 2012, Vol. 253, P. 396–405.

    Article  Google Scholar 

  8. E.E. Dominguez-Ontiveros and Y.A. Hassan, Non-intrusive experimental investigation of flow behavior inside a 5×5 rod bundle with spacer grids using PIV and MIR, Nuclear Engng and Design, 2009, Vol. 239, No. 5, P. 888–898.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to P. D. Lobanov.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kashinsky, O.N., Kulikov, D.V., Lobanov, P.D. et al. Distribution of liquid velocity in the experimental model of a fuel assembly with a spacer grid. Thermophys. Aeromech. 25, 219–223 (2018). https://doi.org/10.1134/S0869864318020075

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0869864318020075

Key words

Navigation