Annular convective-radiative fins with a step change in thickness, and temperature-dependent thermal conductivity and heat transfer coefficient
- 6 Downloads
This article investigates the thermal performance of convective-radiative annular fins with a step reduction in local cross section (SRC). The thermal conductivity of the fin’s material is assumed to be a linear function of temperature, and heat transfer coefficient is assumed to be a power-law function of surface temperature. Moreover, nonzero convection and radiation sink temperatures are included in the mathematical model of the energy equation. The well-known differential transformation method (DTM) is used to derive the analytical solution. An exact analytical solution for a special case is derived to prove the validity of the obtained results from the DTM. The model provided here is a more realistic representation of SRC annular fins in actual engineering practices. Effects of many parameters such as conduction-convection parameters, conduction-radiation parameter and sink temperature, and also some parameters which deal with step fins such as thickness parameter and dimensionless parameter describing the position of junction in the fin on the temperature distribution of both thin and thick sections of the fin are investigated. It is believed that the obtained results will facilitate the design and performance evaluation of SRC annular fins.
KeywordsSRC annular fins performance analysis convective-radiative heat loss analytical solution
Unable to display preview. Download preview PDF.
- 1.A.D. Kraus, A. Aziz, and J. Welty, Extended surface heat transfer, John Wiley & Sons, Inc., New York, 2001.Google Scholar
- 4.T.L. Bergman, A.S. Lavine, F.P. Incropera, and D.P. DeWitt, Introduction to Heat Transfer, 6th ed., John Wiley and Sons, Inc., N.Y., 2011.Google Scholar
- 6.M. Torabi and A. Aziz, Thermal performance and efficiency of convective–radiative T-shaped fins with temperature dependent thermal conductivity, heat transfer coefficient and surface emissivity, Int. Commun. Heat Mass Transf., 2012, Vol. 39, P. 39–1018.Google Scholar
- 10.A. Aziz and M. Torabi, Convective-radiative fins with simultaneous variation of thermal conductivity, heat transfer coefficient, and surface emissivity with temperature, Heat Transf.–Asian Res., 2012, Vol. 41, P. 41–99.Google Scholar
- 11.A. Aziz and T. Fang, Thermal analysis of an annular fin with (a) simultaneously imposed base temperature and base heat flux and (b) fixed base and tip temperatures, Energy Convers. Manag., 2011, Vol. 52, P. 52–2467.Google Scholar
- 12.R. Hassanzadeh and H. Pekel, Heat transfer enhancement in annular fins using functionally graded material, Heat Transf.–Asian Res., 2013, Vol. 42, P. 42–603.Google Scholar
- 18.C. Arslanturk, Performance analysis and optimization of radiating fins with a step change in thickness and variable thermal conductivity by homotopy perturbation method, Heat Mass Transf., 2010, Vol. 47, P. 47–131.Google Scholar
- 22.J.K. Zhou, Differential Transform and Its Applications for Electrical Circuits, Huarjung University Press, Wuhan, 1986.Google Scholar
- 24.M. Torabi, A. Aziz, and K. Zhang, A comparative study of longitudinal fins of rectangular, trapezoidal and concave parabolic profiles with multiple nonlinearities, Energy, 2013, Vol. 51, P. 51–243.Google Scholar
- 27.M. Torabi, H. Yaghoobi, and M.R. Kiani, Thermal analysis of the convective-radiative fin with a step change in thickness and temperature dependent thermal conductivity, J. Theor. Appl. Mech., 2013, Vol. 51, P. 51–593.Google Scholar