Abstract
The surface reconstruction of the textured metal tapes at the temperatures typical for the formation of the seed buffer Y2O3 layer of HTS 2G tapes have been revealed and studied for the first time. The influence of a terrace structure of the substrate surface on the characteristics of the texture of the seed Y2O3 layer has been shown. This effect is critically important to the deposition of buffer layers on the moving tape and allows to expand the temperature range of growth, in which the full inheritance of substrate texture by the seed Y2O3 layer is occurred.
Similar content being viewed by others
References
E. F. Talantsev, N. M. Strickland, S. C. Wimbush, J. G. Storey, J. L. Tallon, and N. J. Long, “Hole Doping Dependence of Critical Current Density in YBa2Cu3O7–d Conductors,” Appl. Phys. Lett. 104, 242601 (2014).
X. Li, M. W. Rupich, C. L. H. Thieme, M. Teplitsky, S. Sathyamurthy, E. Thompson, D. Buczek, J. Schreiber, K. DeMoranville, J. Lynch, J. Inch, D. Tucker, R. Savoy, and S. Fleshler, “The Development of Second Generation HTS Wire at American Superconductor,” IEEE Trans. Appl. Supercond. 19, 2131–3235 (2009).
X. Xiong, K. P. Lenseth, J. L. Reeves, A. Rar, Y. Qiao, R. M. Schmidt, Y. Chen, Y. Li, Y. Y. Xie, and V. Selvamanickam, “High Throughput Processing of Long-Length IBAD MgO and Epi-Buffer Templates at SuperPower,” IEEE Trans. Appl. Supercond. 17, 3375–3378 (2007).
V. Matias, J. Hanisch, E. J. Rowley, C. Sheehan, P. G. Clem, N. Kumasaka, and I. Kodaka, “Preparation of Substrates for IBAD-MgO Coated Conductors,” Mater. Res. Soc. Symp. Proc. 1001, 1–5 (2007).
D. P. Rodionov, I. V. Gervas’eva, Yu. V. Khlebnikova, V. A. Kazantsev, and V. A. Sazonova, “NiCrM (M = W, Mo, V) Ternary Alloy Tapes As Cube-Textured Substrates for Second-Generation Superconducting Cables,” Phys. Met. Metallogr. 113, 504–512 (2012).
D. P. Rodionov, I. V. Gervas’eva, Yu. V. Khlebnikova, V. A. Kazantsev, V. A. Sazonova, L. Yu. Egorova, and R. I. Gulyaeva, “Cubic Texture of Recrystallization of Ribbon Substrates Made of Nickel Alloys Alloyed with W, Mo, and Re Refractory Elements,” Fiz. Met. Metalloved. 113, 1079–1089 (2012).
A. V. Butashin, V. P. Vlasov, V. M. Kanevskii, A. E. Muslimov, and V. A. Fedorov, “Specific Features of the Formation of Terrace-Step Nanostructures on the (0001) Surface of Sapphire Crystals,” Crystallography Reports 57, 824–830 (2012).
N. Long, N. Strickland, B. Chapman, N. Ross, J. Xia, X. Li, W. Zhang, T. Kodenkandath, Y. Huang, and M. Rupich, “Enhanced In-Field Critical Currents of YBCO Second-Generation (2G) Wire by Dy Additions,” Supercond. Sci. Technol. 18, S405–S408 (2005).
J. H. Ahn, B. J. Kim, J. G. Kim, H. J. Kim, G. W. Hong, H. G. Lee, J. M. Yoo, and H. Pradeep, “Effects of Oxidation Conditions on the Microstructure and Texture of NiO in a Cube-Textured Polycrystalline Nickel Substrate,” Physica A 445–448, 620–624 (2006).
A. Howie and U. Valdre, Surface and Interface Characterization by Electron Optical Methods, NATO ASI Series (1988).
V. I. Mikhailov, A. V. Butashin, V. M. Kanevsky, L. E. Polyak, E. V. Rakova, A. E. Moslemov, and V. B. Kvartalov, “Study of Molecular Beam Epitaxy of Cadmium Telluride on Sapphire,” J. Surf. Invest.: X-ray, Synchrotron Neutron Tech. 5, 595–600 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.Y. Chernykh, T.S. Krylova, I.V. Kulikov, I.A. Chernykh, M.L. Zanaveskin, 2018, published in Fizika Metallov i Metallovedenie, 2018, Vol. 119, No. 3, pp. 280–284.
Rights and permissions
About this article
Cite this article
Chernykh, M.Y., Krylova, T.S., Kulikov, I.V. et al. Influence of High-Temperature Annealing of the Textured Metal Ni–W Substrate on the Structural Properties of Seed Layer in HTS 2G tapes. Phys. Metals Metallogr. 119, 267–271 (2018). https://doi.org/10.1134/S0031918X1803002X
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X1803002X