Abstract
Experiments on tension and compression of solid samples cut out from a 60-mm thick plate of an Ti–Al–Sn–V alloy at a temperature of 700◦C are used to determine that this alloy possesses small anisotropy and a different resistance to tension and compression under creep. The approximations of the power law of creep are obtained for each series of these experiments and each direction in the plate. Two models based on the transformed space of stresses are used to simulate the torsion of solid samples. The models account for the different resistance to tension and compression under creep. A series of experiments are carried out on the torsion of solid round rods cut out in the normal direction of the plate. It is shown that the computational and experimental results satisfactorily agree.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
G. A. Raevskaya, K. Zakharchenko, and A. Larichkin, “Determination of Optimum Parameters of the Technological Process for Plates Forming from V95 and V-1461 Alloys in Creep Applied in Aircrafts Constructed by ‘Sukhoi Design Bureau’,” J. Phys.: Conf. Ser. 894, 012078 (2017).
A. C. L. Lam, Zh. Shi, H. Yang, et al., “Creep-Age Forming AA2219 Plates with Different Stiffener Designs and Pre-Form Age Conditions: Experimental and Finite Element Studies,” J. Mater. Process. Technol. 219, 155–163 (2015).
I. A. Banshchikova and I. Yu. Tsvelodub, “On One Class of Inverse Problems of Variation in Shape of Viscoelastic Plates,” Prikl. Mekh. Tekh. Fiz. 37 (5), 122–131 (1996) [J. Appl. Mech. Tech. Phys. 37 (5), 876–883 (1996)].
I. A. Banshchikova and V. A. Blinov, “Experimental and Theoretical Analysis of the Deformation of Transversely Isotropic Plates under Creep Conditions,” Prikl. Mekh. Tekh. Fiz. 57 (3), 129–138 (2016) [J. Appl. Mech. Tech. Phys. 57 (3), 501–509 (2016)].
A. Yu. Larichkin, K. V. Zakharchenko, B. V. Gorev, and V. I. Kapustin, “Physical Simulation of the Technological Process of Shaping of Structural Elements of B95 Aluminum under Creep Conditions,” Obr. Metal. 70 (1), 6–15 (2016).
A. Larichkin, K. Zakharchenko, B. Gorev, et al., “Influence of the Creep Ageing Process on the Fatigue Properties of Components from V95pchT2 (Analog 7175T76) and V95ochT2 (Analog 7475) Aluminium Alloys,” J. Phys.: Conf. Ser. 894, 012050 (2017).
B. V. Gorev and A. F. Nikitenko, “Creep of the Material with Different Tensile and Compression Characteristics,” in Dynamics of Continuous Media, No. 6 (Inst. of Hydrodynamics, Sib. Branch, USSR Acad. of Sci., Novosibirsk, 1970), pp. 106–110.
B. V. Gorev, V. V. Rubanov, and O. V. Sosnin, “Construction of the Creep Equations for Materials with Different Extension and Compression Properties,” Prikl. Mekh. Tekh. Fiz. 20 (4), 121–128 (1979) [J. Appl. Mech. Tech. Phys. 20 (4), 487–492 (1979)].
B. V. Gorev, V. V. Rubanov, and O. V. Sosnin, “Creep of Materials with Different Properties in Tension and Compression,” Probl. Prochn., No. 7, 62–67 (1979). [Strength Mater. 11 (7), 735–740 (1979)].
B. V. Gorev, O. V. Sosnin, and I. V. Lyubashevskaya, “Creep of Materials with Different Properties in Tension and Compression,” in Proc. of the 4th All-Russian Conf. with Int. Participation, Samara, May 29–31, 2007 Vol. 1 (Samara State Tech. Univ., Samara, 2007).
A. A. Zolochevskii, Nonlinear Mechanics of a Deformed Solid (Biznes Inverstor Grupp, Kharkov, 2011) [in Russian].
I. Yu. Tsvelodub, Stability Postulate and Its Applications in the Theory of Creep of Metallic Materials (Inst. of Hydrodynamics, Acad. of Sci. of the USSR, 1991) [in Russian].
I. Yu. Tsvelodub, “Creep of Materials with Different Properties in Tension and Compression,” in Dynamics of Continuous Media, Nos. 19/20 (Inst. of Hydrodynamics, Sib. Branch, USSR Acad. of Sci., Novosibirsk, 1974), pp. 147–155.
I. A. Banshchikova, A. E. Murav’eva, and I. Yu. Tsvelodub, “Calculating the Plates Made of a Strengthening Material with a Different Resistance to Creep and Compression under Tension,” Obr. Metal. 65 (4), 68–77 (2014).
I. A. Banshchikova, B. V. Gorev, and I. Yu. Tsvelodub, “Creep of Plates Made of Aluminum Alloys under Bending,” Prikl. Mekh. Tekh. Fiz. 48 (5), 156–159 (2007) [J. Appl. Mech. Tech. Phys. 48 (5), 751–754 (2007)].
B. D. Annin, A. I. Oleinikov, and K. S. Bormotin, “Modeling of Forming of Wing Panels of the SSJ-100 Aircraft,” Prikl. Mekh. Tekh. Fiz. 51 (4), 155–165 (2010) [J. Appl. Mech. Tech. Phys. 51 (4), 579–589 (2010)].
I. Yu. Tsvelodub, “Construction of Constitutive Equations of Creep in Orthotropic Materials with Different Properties under Tension and Compression,” Prikl. Mekh. Tekh. Fiz. 53 (6), 98–101 (2012) [J. Appl. Mech. Tech. Phys. 53 (6), 888–890 (2012)].
I. A. Banshchikova, D. M. Petrov, and I. Yu. Tsvelodub, “Torsion of Circular Rods at Anisotropic Creep,” J. Phys.: Conf. Ser. 722 (1), 012004 (2016).
I. A. Banshchikova, I. Yu. Tsvelodub, and D. M. Petrov, “Deformation of Structural Elements Made of Alloys with a Lower Resistance to Creep Strains in the Shear Direction,” Uchen. Zap. Kazan. Univ., Ser. Fiz.-Mat. Nauki 157 (3), 34–41 (2015).
A. Yu. Larichkin and B. V. Gorev, “Constructing Shear Creep Strains from the Pure Torsion of Solid Round Shafts,” Nauch. Tekh. Vedom. St.-Peterb. Gos. Politekh. Univ., Fiz.-Mat. Nauki 4 (177), 212–219 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.A. Banshchikova, A.Yu. Larichkin.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 59, No. 6, pp. 123–134, November–December, 2018.
Rights and permissions
About this article
Cite this article
Banshchikova, I.A., Larichkin, A.Y. Torsion Of Solid Rods with Account for the Different Resistance of the Material to Tension and Compression Under Creep. J Appl Mech Tech Phy 59, 1067–1077 (2018). https://doi.org/10.1134/S0021894418060123
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894418060123