Abstract
A forced convection flow and heat transfer of a water-based nanofluid with SiO2 particles with different volume fractions and nanoparticle diameters in corrugated ducts with different shapes are numerically studied. The three-dimensional governing equations are numerically solved in the domain by the control volume approach based on the SIMPLE technique. The effects of the nanoparticle diameter and shape on heat transfer is considered in the Reynolds number range 3000 ⩽ Re ⩽ 5000, and a uniform wall temperature is applied on the walls. The corrugated duct shape is optimized by the maximum performance evaluation criterion.
Similar content being viewed by others
References
G. Comini, C. Nonino, and S. Savino, “Effect of Aspect Ratio on Convection Enhancement in Wavy Channels,” Numer. Heat Transfer. Pt A 44, 21–37 (2003).
Z. Grant Mills, A. Warey, and A. Alexeev, “Heat Transfer Enhancement and Thermal-Hydraulic Performance in Laminar Flows through Asymmetric Wavy Walled Channels,” Int. J. Heat Mass Transfer 97, 450–460 (2016).
N. Mohamed, B. Khedidja, Z. Belkacem, and D. Michel, “Numerical Study of Laminar Forced Convection in Entrance Region of a Wavy Channel,” Numer. Heat Transfer. Pt A 53, 35–52 (2008).
J. Rostami, A. Abbassi, and M. Saffar-Avval, “Optimization of Conjugate Heat Transfer in Wavy Walls Microchannels,” Appl. Thermal Eng. 82, 318–328 (2015).
Z. Duan and Y. S. Muzychka, “Effects of Axial Corrugated Roughness on Low Reynolds Number Slip Flow and Continuum Flow in Micro-Tubes,” J. Heat Transfer 132, 1–8 (2010).
M. Khoshvaght-Aliabadi, “Influence of Different Design Parameters and Al2O3 Water Nanofluid Flow on Heat Transfer and Flow Characteristics of Sinusoidal Corrugated Channels,” Energy Conversat. Management 88, 96–105 (2014).
H. A. Mohammed, P. Gunnasegaran, and N. H. Shuaib, “Numerical Simulation of Heat Transfer Enhancement in Wavy Microchannel Heat Sink,” Int. Comm. Heat Mass Transfer 38, 63–70 (2011).
H. Heidary and M. Kermani, “Effect of Nano-Particles on Forced Convection in Sinusoidal-Wall Channel,” Int. Comm. Heat Mass Transfer 37, 1520–1527 (2010).
S. Parvin, R. Nasrin, and M. A. Alim, “Heat Transfer and Entropy Generation through Nanofluid Filled Direct Absorption Solar Collector,” Int. J. Heat Mass Transfer 71, 386–395 (2014).
E. Ebrahimnia-Bajestan, M. C. Moghadam, H. Niazmand, et al., “Experimental and Numerical Investigation of Nanofluids Heat Transfer Characteristics for Application in Solar Heat Exchangers,” Int. J. Heat Mass Transfer 92, 1041–1052 (2016).
W. Arshad and H. M. Ali, “Experimental Investigation of Heat Transfer and Pressure Drop in a Straight Minichannel Heat Sink Using TiO2 Nanofluid,” Int. J. Heat Mass Transfer 110, 248–256 (2017).
F. Liu, Y. Cai, L. Wang, and J. Zhao, “Effects of Nanoparticle Shapes on Laminar Forced Convective Heat Transfer in Curved Ducts Using Two-Phase Model,” Int. J. Heat Mass Transfer 116, 292–305 (2018).
W. Duangthongsuk, A. Selim Dalkilic, and S. Wongwises, “Convective Heat Transfer of Al2O3–Water Nanofluids in a Microchannel Heat Sink,” Current Nanosci. 8, 317–322 (2012).
J. Raja Bose, L. Godson Asirvatham, N. Kumar, et al., “Numerical Study on Convective Heat Transfer Characteristics of Silver/Water Nanofluid in Minichannel,” Current Nanosci. 13, 426–434 (2017).
A. A. Abbasian Arani, S. Sadripour, and S. Kermani, “Nanoparticle Shape Effects on Thermal-Hydraulic Performance of Boehmite Alumina Nanofluids in a Sinusoidal-Wavy Mini-Channel with Phase Shift and Variable Wavelength,” Int. J. Mech. Sci. 128/129, 550–563 (2017).
S. Sadripour, M. Mollamahdi, G. A. Sheikhzadeh, and M. Adibi, “Providing Thermal Comfort and Saving Energy Inside the Buildings Using a Ceiling Fan in Heating Systems,” J. Brazil. Soc. Mech. Sci. Eng. 39 (10), 4219–4230 (2017).
S. M. Vanaki, H. A. Mohammed, A. Abdollahi, and M. A. Wahid, “Effect of Nanoparticle Shapes on the Heat Transfer Enhancement in a Wavy Channel with Different Phase Shifts,” J. Molecular Liquids 196, 32–42 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S. Sadripour.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 59, No. 6, pp. 102–111, November–December, 2018.
Rights and permissions
About this article
Cite this article
Sadripour, S. Investigation of Flow Characteristics And Heat Transfer Enhancement in a Nanofluid Flow in a Corrugated Duct. J Appl Mech Tech Phy 59, 1049–1057 (2018). https://doi.org/10.1134/S002189441806010X
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S002189441806010X