The Input Window of a Target Station for Operation with Medical Radionuclides

Abstract— The design of an inlet vacuum window, which was developed and manufactured as part of the project of a target station for the production of medical radionuclides, is presented. The calculated data of temperature fields and thermomechanical stresses in the window elements are presented, as well as data on the stress–strain state of the window under the action of the total load (pressure plus uneven heating). Particular attention is paid to the numerical simulation of window cooling by unheated water flows. The “life time” of the window is estimated due to radiation damage to its material. Given the high levels of energy release and induced activity, initiated by protons in the window, as well as its frequent replacement, the AMg6 alloy was selected as the window material.

This is a preview of subscription content, log in to check access.

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.

REFERENCES

  1. 1

    Maslov, M.A., Peleshko, V.N., Soldatov, A.P., Khasin, A.A., and Tertychnyi, R.G., Naukograd: Nauka, Proizvod. Obshch., 2018, nos. 3/4, pp. 16–20.

  2. 2

    Savitskaya, E.N., Maslov, M.A., Nikitin, S.A., Peleshko, V.N., and Skvorodnev, N.V., Proc. Russian Particle Accelerator Conference RUPAC2018, Protvino, 2018, p. 391.

  3. 3

    Wang, H.J., Zhu, D.H., Qu, H.M., Kang, L., and Liu, R.H., Proc. 4th Int. Particle Accelerator Conference IPAC2013, Shanghai, 2013, p. 3367.

  4. 4

    Butzek, M., Wolters, J., and Laatsch, B., Proc. 4th High Power Targetry Workshop, Malmö, 2011.

  5. 5

    Murdoch, G., Decarlo, A., Henderson, S., Kim, S., Potter, K., Roseberry, T., Rank, J., and Raparia, D., Proc. Particle Accelerator Conference PAC’2003, Portland, OR, 2003, p. 1467.

  6. 6

    Ziegler, J.F., Biersack, J.P., and Ziegler, M.D., STRIM/SRIM. http://www.srim.org.

  7. 7

    Mikheev, M.A. and Mikheeva, I.M., Osnovy teploperedachi (Fundamentals of Heat Transfer), Moscow: Energiya, 1977.

  8. 8

    Petukhov, B.S., Genin, L.G., and Kovalev, S.A., Teploobmen v yadernykh energeticheskikh ustanovkakh (Heat Exchange in Nuclear-Power Plants), Moscow: Atomizdat, 1974.

  9. 9

    Pokhvalov, Yu.E., Kropin, I.V., and Kurganov, I.V., Teploenergetika, 1966, vol. 5, p. 63.

    Google Scholar 

  10. 10

    ANSYS. http://www.ansys.com.

  11. 11

    Isachenko, V.P., Osipova, V.A., and Sukhomel, A.S., Teploperedacha (Heat Transfer), Moscow: Energiya, 1975.

    Google Scholar 

  12. 12

    Kotliar, V., Gusev, V., Kukhtenkov, V., and Savin, N., CEUR Workshop Proc., 2017, vol. 1787, p. 323.

    Google Scholar 

Download references

ACKNOWLEDGMENTS

The authors are grateful to employee of the Institute of High Energy Physics, Research Center Kurchatov Institute L.O. Baliev for participating in the discussion of the results and useful comments, and to the Department of Mathematics and Computer Engineering of the Institute of High Energy Physics, Research Center Kurchatov Institute for providing computational resources on the shared computing cluster [12].

Funding

This work was supported by the Ministry of Science and Higher Education of the Russian Federation in the framework of the Subsidy Agreement dated June 27, 2019 no. 075.15.2019.1393, Agreement identifier RFMEFI60717X0193 (Applied research and experimental development of innovative production technology for the industrial production of medical strontium isotope-82, necessary for the diagnosis by positron emission tomography of various cardiological diseases).

Author information

Affiliations

Authors

Corresponding author

Correspondence to A. D. Ryabov.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Maslov, M.A., Ryabov, A.D., Skvorodnev, N.V. et al. The Input Window of a Target Station for Operation with Medical Radionuclides. Instrum Exp Tech 63, 396–402 (2020). https://doi.org/10.1134/S0020441220030124

Download citation