Abstract
A method for analyzing the transverse beam feedback circuit in a ring accelerator and selecting its parameters using the concept of the active beam coupling impedance, which is externally imposed and controlled, is described. This approach is used for the physical substantiation of approaches to upgrading two operational transverse feedback systems that are available in the U-70 synchrotron of the Institute for High Energy Physics, National Research Centre Kurchatov Institute: narrow-band analog and broadband digital systems. Both systems were subjected to deep upgrading, which is based on this method, and were successfully commissioned in 2007 and 2011, respectively. A brief description of their updated engineering implementation is given. The presented experimental results confirm the adequacy of the impedance approach to designing and adjusting the transverse beam feedback circuits in the U-70 synchrotron.
Similar content being viewed by others
References
Ivanov, S.V. and Pozdeev, M.Yu., Preprint of Inst. for High Energy Phys., Protvino, 1994, no. 94-110.
Balbekov, V.I., Gertsev, K.F., and Lebedev, O.P., Preprint of Inst. for High Energy Phys., Serpukhov, 1984, no. 84-23.
Ivanov, S.V., Preprint of Inst. for High Energy Phys., Protvino, 1997, no. 97-64.
Ivanov, S., Proc. 17th Int. Conf. on High Energy Accel. HEACC-98, Dubna, Report 50, 1998.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Ivanov, N.A. Ignashin, O.P. Lebedev, S.E. Sytov, 2016, published in Pribory i Tekhnika Eksperimenta, 2016, No. 4, pp. 5–15.
Rights and permissions
About this article
Cite this article
Ivanov, S.V., Ignashin, N.A., Lebedev, O.P. et al. Transverse beam feedback systems in the U-70 synchrotron. Instrum Exp Tech 59, 487–496 (2016). https://doi.org/10.1134/S0020441216030052
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020441216030052