Advertisement

Inorganic Materials: Applied Research

, Volume 9, Issue 6, pp 1096–1099 | Cite as

Wear- and Corrosion-Resistant Functionally Gradient Coatings Based on Composite Powders of Metal–Nonmetal System

  • T. I. BobkovaEmail author
  • B. V. Farmakovsky
FUNCTIONAL MATERIALS

Abstract

The technology of formation of wear- and corrosion-resistant functionally gradient coatings by a method of microplasma sputtering of composite nanostructured powders was developed. The microhardness of obtained coatings reaches 10.27 GPa, providing effective protection of parts and components of precision engineering in extreme operating conditions.

Keywords:

matrix material mechanosynthesis composite powder microplasma sputtering 

Notes

REFERENCES

  1. 1.
    Margolin, V.I., Zhabrev, V.A., et al., Vvedenie v nanotekhnologiyu (Introduction to Nanotechnology), St. Petersburg: Lan’, 2012.Google Scholar
  2. 2.
    Farmakovsky, B.V. and Bobkova, T.I., Metal-matrix composite powders for gas-thermal spraying of functional gradient coatings with adjustable hardness, Materialy 12-i mezhdunarodnoi konferentsii “Novye materialy i tekhnologii: poroshkovaya metallurgiya, kompositsionnye materialy, zashchitnye pokrytiya, svarka,” 25–27 maya 2016 g. (Proc. Twelve Int. Conf. “Advanced Materials and Technologies: Powder Metallurgy, Composite Materials, Protective Coatings, and Welding,” May 25–27, 2016), Minsk: Inst. Poroshk. Metall., 2016, pp. 188–191.Google Scholar
  3. 3.
    Gordienko, A.I., Ivashko, V.V., and Vegera, I.I., Development and application of functional gradient materials. http://cyberleninka/ru/article/n/razrabotka-i-primenenie-funksionalno-gradientnyh-materialov.Google Scholar
  4. 4.
    Bobkova, T.I., Yurkov, M.A., Chernysh, A.A., Eliseev, A.A., Deev, A.A., Klimov, V.N., and Samodelkin, E.A., RF Patent 2573309, Byull. Izobret., 2016, no. 2.Google Scholar
  5. 5.
    Sokolov, Yu.V., Plazmennoe formoobrazovanie (Plasma Forming), Minsk: Tekhnoprint, 2003.Google Scholar
  6. 6.
    Gerashchenkov, D.A., Coating by cold gas-dynamic spraying based on reinforced AlSn + Al2O3 powders, Extended Abstract of Cand. Sci. (Eng.) Dissertation, St. Petersburg, 2015.Google Scholar
  7. 7.
    Measurement of mechanical properties by instrumental indentation according to GOST R 8.748-2011 (ISO 14577-1:2015). http://nanoscan.info/metodiki/nanoindentirovanie. Accessed February 17, 2017.Google Scholar
  8. 8.
    Mazeeva, A.K., Ramaldanova, A.A., Yakovleva, N.V., Gerashchenkova, E.Yu., Farmakovsky, B.V., and Bobkova, T.I., The nanostructured state of functional coatings of various classes using operational control methods, in Fiziko-khimicheskie aspekty izucheniya klasterov, nanostruktur i nanomaterialov (Physical and Chemical Study of Clusters, Nanostructures, and Nanomaterials), Tver, 2012, no. 4, pp. 181–188.Google Scholar
  9. 9.
    Kuznetsov, N.T., Novotortsev, V.M., Zhabrev, V.A., and Margolin, V.I., Osnovy nanotekhnologii: Uchebnik (Fundamentals of Nanotechnology: Manual), Moscow: BINOM. Laboratoriya Znanii, 2014.Google Scholar
  10. 10.
    GOST (State Standard) 5272-68. Corrosion of Metals. Terms, Moscow: Izd. Standartov, 1969. http://www. gostbaza.ru/?gost=18172. Accessed February 17, 2017.Google Scholar
  11. 11.
    Gorynin, I.V., Oryshchenko, A.S., Farmakovsky, B.V., and Kuznetsov, P.A., Prospective research and developments at the scientific nanotechnological center CRISM Prometei in the field of new nanomaterials, Vopr. Materialoved., 2014, no. 2 (78), pp. 118–128.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  1. 1.National Research Center Kurchatov Institute—Central Research Institute of Structural Materials PrometeySt. PetersburgRussia

Personalised recommendations