Advertisement

Zinc–Nickel Alloy Electrodeposition: Characterization, Properties, Multilayers and Composites

  • N. Lotfi
  • M. AliofkhazraeiEmail author
  • H. Rahmani
  • Gh. Barati Darband
NEW SUBSTANCES, MATERIALS, AND COATINGS
  • 33 Downloads

Abstract

The alloy coatings such as zinc–nickel are used to improve the lifetime of zinc sacrificial coatings. zinc–nickel alloy coating has a longer history than other zinc alloy coatings and is considered as the most corrosion resistive zinc alloy. One of the important properties of this type of coatings is the ductility properties of coated steel pieces; as after thermal treatment and shaping operations, the corrosion resistance is enhanced up to an optimal level. Because of such properties, this alloy is investigated in coating the pieces such as connecting bolts, brake system components, and fuel system. Resistance to heat, ultraviolet light, hydraulic fluids, and fuels are other characteristics of such coatings. The use of zinc–nickel alloy coatings is growing in the bolts and threaded parts industry. Since these coatings do not prevent galvanic corrosion in contact with aluminum, they are widely used in industries that deal with aluminum bodies. However, the zinc–nickel alloys are considered as the most expensive coatings. These alloys are coated both by acidic and alkaline baths that provide different coating properties. This paper reviews the studies conducted on zinc–nickel alloy coatings, analyzing baths and their properties, the effect of different parameters on electrodeposition, as well as Zn–Ni multilayer and composite coatings and their properties.

Keywords:

composite corrosion resistance electrodeposition multilayer zinc–nickel 

REFERENCES

  1. 1.
    Jacobs, C.B., J. Am. Chem. Soc., 1905, vol. 27, p. 972.Google Scholar
  2. 2.
    Schoch, E.P. and Hirsch, A., J. Am. Chem. Soc., 1907, vol. 29, p. 314.Google Scholar
  3. 3.
    Shibuya, A., Kurimoto, T., Hoboh, Y., and Usuki, N., Trans. Iron Steel Inst. Jpn., 1983, vol. 23, p. 923.Google Scholar
  4. 4.
    Siitari, D.W., Sagiyama, M., and Hara, T., Trans. Iron Steel Inst. Jpn., 1983, vol. 23, p. 959.Google Scholar
  5. 5.
    Hsu, G.F., Proc. 19th Annual Airline Plating and Metal Finishing Forum, San Antonio, TX, 1983.Google Scholar
  6. 6.
    Sriraman, K.R., Brahimi, S., Zpunar, J.A., et al., Electrochim. Acta, 2013, vol. 105, p. 314.Google Scholar
  7. 7.
    Hall, D.E., Plat. Surf. Finish., 1983, vol. 70, p. 59.Google Scholar
  8. 8.
    Mordechay Schlesinger, M.P., Modern Electroplating, Pennington, NJ: Electrochemical Society, 2010.Google Scholar
  9. 9.
    Yang, Z.L., Yang, Y.X., Zhang, J.B., et al., Russ. J. Electrochem., 2006, vol. 42, p. 22.Google Scholar
  10. 10.
    Wilcox, G.D. and Gabe, D.R., Corros. Sci., 1993, vol. 35, p. 1251.Google Scholar
  11. 11.
    Ghaziof, S. and Gao, W., J. Alloys Compd., 2015, vol. 622, p. 918.Google Scholar
  12. 12.
    Wen, X., Yang, Z., Xiao, X., et al., Electrochim. Acta, 2016, vol. 187, p. 65.Google Scholar
  13. 13.
    Kwon, M., Jo, D.-h., Cho, S.H., et al., Surf. Coat. Technol., 2016, vol. 288, p. 163.Google Scholar
  14. 14.
    Praveen, B.M. and Venkatesha, T.V., Appl. Surf. Sci., 2008, vol. 254, p. 2418.Google Scholar
  15. 15.
    Lin, C.C. and Huang, C.M., J. Coat. Technol. Res., 2006, vol. 3, p. 99.Google Scholar
  16. 16.
    Baldwin, K.R., Robinson, M.J., and Smith, C.J.E., Corros. Sci., 1994, vol. 36, p. 1115.Google Scholar
  17. 17.
    Praveen Kumar, C.M., Venkatesha, T.V., Vathsala, K., and Nayana, K.O., J. Coat. Technol. Res., 2011, vol. 9, p. 71.Google Scholar
  18. 18.
    Gavrila, M., Millet, J.P., Mazille, H., et al., Surf. Coat. Technol., 2000, vol. 123, p. 164.Google Scholar
  19. 19.
    Alfantazi, A.M. and Erb, U., Mater. Sci. Eng., A, 1996, vol. 212, p. 123.Google Scholar
  20. 20.
    Bories, C., Bonino, J.P., and Rousset, A., J. Appl. Electrochem., 1999, vol. 29, p. 1045.Google Scholar
  21. 21.
    Fratesi, R. and Roventi, G., Surf. Coat. Technol., 1996, vol. 82, p. 158.Google Scholar
  22. 22.
    Baldwin, K.R., Robinson, M.J., and Smith, C.J.E., Corros. Sci., 1993, vol. 35, p. 1267.Google Scholar
  23. 23.
    Reumont, G., Perrot, P., and Foct, J., J. Mater. Sci., 1998, vol. 33, p. 4759.Google Scholar
  24. 24.
    Pfiz, R. and Strube, G., Trans. Inst. Met. Finish., 1996, vol. 74, p. 158.Google Scholar
  25. 25.
    Lee, H.Y. and Kim, S.G., Surf. Coat. Technol., 2000, vol. 135, p. 69.Google Scholar
  26. 26.
    Bajat, J.B., Maksimović, M.D., and Radović, G.R., J. Serb. Chem. Soc., 2002, vol. 67, p. 625.Google Scholar
  27. 27.
    Swathirajan, S., J. Electrochem. Soc., 1986, vol. 133, p. 671.Google Scholar
  28. 28.
    Ravindran, V. and Muralidharan, V.S., Bull. Mater. Sci., 2006, vol. 29, p. 293.Google Scholar
  29. 29.
    Fei, J.Y., Liang, G.Z., Xin, W., L., and Wang, W., J. Iron Steel Res. Int., 2006, vol. 13, p. 61.Google Scholar
  30. 30.
    Wykpis, K., Popczyk, M., and Budniok, A., Bull. Mater. Sci., 2011, vol. 34, p. 997.Google Scholar
  31. 31.
    Coleman, D.H. and Popov, B.N., J. Appl. Electrochem., 1998, vol. 28, p. 889.Google Scholar
  32. 32.
    Watkins, K.G., Jones, R.D., and Lo, K.M., Mater. Lett., 1989, vol. 8, p. 21.Google Scholar
  33. 33.
    Hegde, A.C., Venkatakrishna, K., and Eliaz, N., Surf. Coat. Technol., 2010, vol. 205, p. 2031.Google Scholar
  34. 34.
    Eliaz, N., Venkatakrishna, K., and Hegde, A.C., Surf. Coat. Technol., 2010, vol. 205, p. 1969.Google Scholar
  35. 35.
    Ashassi-Sorkhabi, H., Hagrah, A., Parvini-Ahmadi, N., and Manzoori, J., Surf. Coat. Technol., 2001, vol. 140, p. 278.Google Scholar
  36. 36.
    Elkhatabi, F., Benballa, M., Sarret, M., and Müller, C., Electrochim. Acta, 1998, vol. 44, p. 1645.Google Scholar
  37. 37.
    Boonyongmaneerat, Y., Saenapitak, S., and Saengkiettiyut, K., J. Alloys Compd., 2009, vol. 487, p. 479.Google Scholar
  38. 38.
    Qiao, X., Li, H., Zhao, W., and Li, D., Electrochim. Acta, 2013, vol. 89, p. 771.Google Scholar
  39. 39.
    Wykpis, K., Popczyk, M., Niedbala, J., et al., Coat., Mater. Sci., 2012, vol. 1, p. 10.Google Scholar
  40. 40.
    Pedroza, G.A.G., de Souza, C.A.C., Carlos, I.A., and de Andrade Lima L.R.P., Surf. Coat. Technol., 2012, vol. 206, p. 2927.Google Scholar
  41. 41.
    Magagnin, L., Nobili, L., and Cavallotti, P.L., J. Alloys Compd., 2014.Google Scholar
  42. 42.
    Hosseini, M.G., Ashassi-Sorkhabi, H., and Ghiasvand, H.A.Y., Surf. Coat. Technol., 2008, vol. 202, p. 2897.Google Scholar
  43. 43.
    Soares, M.E., Souza, C.A.C., and Kuri, S.E., Mater. Sci. Eng., A, 2005, vol. 402, p. 16.Google Scholar
  44. 44.
    Fashu, S., Gu, C.D., Wang, X.L., and Tu, J.P., Surf. Coat. Technol., 2014, vol. 242, p. 34.Google Scholar
  45. 45.
    Byk, T.V., Gaevskaya, T.V., and Tsybulskaya, L.S., Surf. Coat. Technol., 2008, vol. 202, p. 5817.Google Scholar
  46. 46.
    Sachin, H.P., Achary, G., Arthoba Naik, Y., and Venkatesha, T.V., Bull. Mater. Sci., 2007, vol. 30, p. 57.Google Scholar
  47. 47.
    El Hajjami, A., Gigandet, M.P., De Petris-Wery, M., et al., Appl. Surf. Sci., 2007, vol. 254, p. 480.Google Scholar
  48. 48.
    Sriraman, K.R., Brahimi, S., Szpunar, J.A., et al., Surf. Coat. Technol., 2013, vol. 224, p. 126.Google Scholar
  49. 49.
    Barceló, G., García, E., Sarret, M., et al., J. Appl. Electrochem., 1998, vol. 28, p. 1113.Google Scholar
  50. 50.
    Brenner, A. and Brenner, N., Electrodeposition of Alloys, New York: Academic Press, 1963, vol. 2.Google Scholar
  51. 51.
    Miranda, F.J.F., Barcia, O.E., Diaz, S.L., et al., Electrochim. Acta, 1996, vol. 41, p. 1041.Google Scholar
  52. 52.
    Elkhatabi, F., Sarret, M., and Müller, C., J. Electroanal. Chem., 1996, vol. 404, p. 45.Google Scholar
  53. 53.
    Seki, A. and Kamei, K., J. Iron Steel Inst. Jpn., 1991, vol. 77, p. 892.Google Scholar
  54. 54.
    Müller, C., Sarret, M., and Benballa, M., J. Electroanal. Chem., 2002, vol. 519, p. 85.Google Scholar
  55. 55.
    Conrad, H.A., McGuire, M.R., Zhou, T., et al., Surf. Coat. Technol., 2015, vol. 272, p. 50.Google Scholar
  56. 56.
    Chassaing, E. and Wiart, R., Electrochim. Acta, 1992, vol. 37, p. 545.Google Scholar
  57. 57.
    ASTM B.117: Standard Practice for Operating Salt Spray (Fog) Apparatus, West Conshohocken, PA: ASTM Int., 1997.Google Scholar
  58. 58.
    Alfantazi, A.M. and Erb, U., Corrosion, 1996, vol. 52, p. 880.Google Scholar
  59. 59.
    Baldwin K.R., Smith C.J.E., and Robinson M.J., Trans. Mater. Heat Treat., 1995, vol. 51, p. 932.Google Scholar
  60. 60.
    Mosavat, S.H., Shariat, M.H., and Bahrololoom, M.E., Corros. Sci., 2012, vol. 59, p. 81.Google Scholar
  61. 61.
    Tian, W., Xie, F.Q., Wu, X.Q., and Yang, Z.Z., Surf. Interface Anal., 2009, vol. 41, p. 251.Google Scholar
  62. 62.
    ASTM B841-99: Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits, West Conshohocken, PA: ASTM Int., 2010.Google Scholar
  63. 63.
    Swathirajan, S., J. Electroanal. Chem., 1987, vol. 221, p. 211.Google Scholar
  64. 64.
    Vaes, J., Fransaer, J., and Celis, J.P., J. Electrochem. Soc., 2002, vol. 149, p. C567.Google Scholar
  65. 65.
    Abd El Rehim, S. and Ibrahim, M., J. Metall., 1998, vol. 52, p. 304.Google Scholar
  66. 66.
    Kawano, S., Ohgai, T., Kobayashi, S., et al., Proc. 2nd Int. Conference on Processing Materials for Properties, San Francisco, CA, 2000, p. 769.Google Scholar
  67. 67.
    Rizwan, R., Mehmood, M., Imran, M., et al., Mater. Trans., 2007, vol. 48, p. 1558.Google Scholar
  68. 68.
    Roev, V. and Gudin, N., Trans. Inst. Met. Finish., 1996, vol. 74, p. 153.Google Scholar
  69. 69.
    Baldwin, K., Smith, C., and Robinson, M., Trans. Inst. Met. Finish., 1994, vol. 72, p. 79.Google Scholar
  70. 70.
    Stein, M., Owens, S.P., Pickering, H.W., and Weil, K.G., Proc. AESF Annual Technical Conference, Cleveland, OH, 1996, p. 83.Google Scholar
  71. 71.
    Abou-Krisha, M.M., Assaf, F.H., and Toghan, A.A., J. Solid State Electrochem., 2007, vol. 11, p. 244.Google Scholar
  72. 72.
    Abd El Rehim, S.S., Fouad, E.E., Abd El Wahab, S.M., and Hassan, H.H., Electrochim. Acta, 1996, vol. 41, p. 1413.Google Scholar
  73. 73.
    Vasilache, T., Gutt, S., Sandu, I., et al., Alloy Electrodeposition.Google Scholar
  74. 74.
    Sonntag, B., Dingwerth, B., Vogel, R., and Scheller, B., Galvanotechnik, 2010, vol. 101, p. 992.Google Scholar
  75. 75.
    Townsend, H., Mater. Perform., 1991, vol. 30, p. 60.Google Scholar
  76. 76.
    Divisek, J., Malinowski, P., Mergel, J., and Schmitz, H., Int. J. Hydrogen Energy, 1988, vol. 13, p. 141.Google Scholar
  77. 77.
    Giz, M.J., Machado, S.A.S., Avaca, L.A., and Gonzalez, E.R., J. Appl. Electrochem., 1992, vol. 22, p. 973.Google Scholar
  78. 78.
    Sheela, G., Pushpavanam, M., and Pushpavanam, S., Int. J. Hydrogen Energy, 2002, vol. 27, p. 627.Google Scholar
  79. 79.
    Müller, C., Sarret, M., and Benballa, M., Electrochim. Acta, 2001, vol. 46, p. 2811.Google Scholar
  80. 80.
    Raj, I.A. and Vasu, K.I., J. Appl. Electrochem., 1992, vol. 22, p. 471.Google Scholar
  81. 81.
    Giridhar, J. and van Ooij, W.J., Surf. Coat. Technol., 1992, vol. 53, p. 35.Google Scholar
  82. 82.
    Alfantazi, A.M., Page, J., and Erb, U., J. Appl. Electrochem., 1996, vol. 26, p. 1225.Google Scholar
  83. 83.
    Nakano, H., Arakawa, S., Oue, S., and Kobayashi, S., ISIJ Int., 2013, vol. 53, p. 1864.Google Scholar
  84. 84.
    Alexis, J., Adrian, D., Masri, T., and Petit, J.A., Surf. Eng., 2004, vol. 20, p. 121.Google Scholar
  85. 85.
    Sohi, M.H. and Jalali, M., J. Mater. Process. Technol., 2003, vol. 138, p. 63.Google Scholar
  86. 86.
    Wharton, J.A., Wilcox, G.D., and Baldwin, K.R., Trans. Inst. Met. Finish., 1996, vol. 74, p. 210.Google Scholar
  87. 87.
    Flis, J., Tobiyama, Y., Shiga, C., and Mochizuki, K., J. Appl. Electrochem., 2002, vol. 32, p. 401.Google Scholar
  88. 88.
    Kitayama, M., Odashima, H., Saito, T., and Hirano, Y., Trans. Iron Steel Inst. Jpn., 1986, vol. 26, p. 557.Google Scholar
  89. 89.
    Abdel Hamid, Z., Anti-Corros. Methods Mater., 1998, vol. 45, p. 31.Google Scholar
  90. 90.
    Nobutaka Miura, T.S., Tatsuya Kanamaru Yoshio Shindo, and Yoshio Kitazawa, Trans. Iron Steel Inst. Jpn.,1966, vol. 23, p. 913.Google Scholar
  91. 91.
    Watson, S.A., Trans. Inst. Met. Finish., 1992, vol. 70, p. 28.Google Scholar
  92. 92.
    Wakano, S., Shibuya, A., Hobo, Y., and Nishihira, M., Trans. Iron Steel Inst. Jpn., 1983, vol. 23, p. 967.Google Scholar
  93. 93.
    Lehmberg, C.E., Lewis, D.B., and Marshall, G.W., Surf. Coat. Technol., 2005, vol. 192, p. 269.Google Scholar
  94. 94.
    Nomura, S., Sakai, H., Nishimoto, H., et al., Trans. Iron Steel Inst. Jpn., 1983, vol. 23, p. 930.Google Scholar
  95. 95.
    Durairajan, A., Haran, B.S., White, R.E., and Popov, B.N., J. Electrochem. Soc., 2000, vol. 147, p. 1781.Google Scholar
  96. 96.
    Abou-Krisha, M., Assaf, F., and El-Naby, S., J. Coat. Technol. Res., 2009, vol. 6, p. 391.Google Scholar
  97. 97.
    Krishniyer, A., Ramasubramanian, M., Popov, B., and White, R., Plat. Surf. Finish., 1999, vol. 86, p. 99.Google Scholar
  98. 98.
    Abou-Krisha, M.M., Mater. Chem. Phys., 2011, vol. 125, p. 621.Google Scholar
  99. 99.
    Thangaraj, V., Eliaz, N., and Hegde, A., J. Appl. Electrochem., 2009, vol. 39, p. 339.Google Scholar
  100. 100.
    Ishihara, M., Yumoto, H., Akashi, K., and Kamei, K., Mater. Sci. Eng., B, 1996, vol. 38, p. 150.Google Scholar
  101. 101.
    Basavanna, S. and Arthoba Naik, Y., J. Appl. Electrochem., 2009, vol. 39, p. 1975.Google Scholar
  102. 102.
    Safranek, W.H., The Properties of Electrodeposited Metals and Alloys. Handbook, Orlando, FL: American Electroplaters and Surface Finishers Society, 1986, vol. 1986, p. 550.Google Scholar
  103. 103.
    Ganesan, P., Kumaraguru, S.P., and Popov, B.N., Surf. Coat. Technol., 2007, vol. 201, p. 7896.Google Scholar
  104. 104.
    Bruet, H., Bonino, J.P., and Rousset, A., J. Mater. Sci., 1999, vol. 34, p. 881.Google Scholar
  105. 105.
    Ni–Zn (Nickel-Zinc). Section III: Supplemental Literature Review. Okamoto, H.J., J. Phase Equilib. Diffus., 2013, vol. 34, p. 153. https://doi.org/10.1007/s11669-012-0154-5.Google Scholar
  106. 106.
    Fayomi, O.S.I., Tau, V., Popoola, A.P.I., et al., Appl. Phys. A: Mater. Sci. Process., 2015, vol. 121, p. 749.Google Scholar
  107. 107.
    Hino, M., Murakami, K., Muraoka, K., et al., J. Jpn. Inst. Met., 2014, vol. 78, p. 31.Google Scholar
  108. 108.
    Hammami, O., Dhouibi, L., Berçot, P., et al., Can. J. Chem. Eng., 2013, vol. 91, p. 19.Google Scholar
  109. 109.
    Nakano, H., Arakawa, S., Takada, Y., et al., Mater. Trans., 2012, vol. 53, p. 1946.Google Scholar
  110. 110.
    Telli, E., Döner, A., and Kardaş, G., Electrochim. Acta, 2013, vol. 107, p. 216.Google Scholar
  111. 111.
    Elsherief, A. and Shoeib, M., Corros. Prev. Control, 2003, vol. 50, p. 25.Google Scholar
  112. 112.
    Praveen, B.M. and Venkatesha, T.V., Chem. Eng. Commun., 2012, vol. 199, p. 812.Google Scholar
  113. 113.
    Fabri Miranda, F.J., Barcia, O.E., Mottos, O.R., and Wiart, R., J. Electrochem. Soc., 1997, vol. 144, p. 3449.Google Scholar
  114. 114.
    Giridhar, J. and van Ooij, W.J., Surf. Coat. Technol., 1992, vol. 52, p. 17.Google Scholar
  115. 115.
    Nakano, H., Kataoka, S., Oue, S., and Kobayashi, S., J. Iron Steel Inst. Jpn., 2013, vol. 99, p. 709.Google Scholar
  116. 116.
    Khan, R., Mehmood, M., Rizwan, R., et al., Corros. Eng. Sci. Technol., 2011, vol. 46, p. 755.Google Scholar
  117. 117.
    Rodriguez-Torres, I., Valentin, G., and Lapicque, F., J. Appl. Electrochem., 1999, vol. 29, p. 1035.Google Scholar
  118. 118.
    Pushpavanam, M. and Balakrishnan, K., J. Appl. Electrochem., 1996, vol. 26, p. 1065.Google Scholar
  119. 119.
    Chandrasekar, M.S., Srinivasan, S., and Pushpavanam, M., J. Solid State Electrochem., 2009, vol. 13, p. 781.Google Scholar
  120. 120.
    Hammami, O., Dhouibi, L., and Triki, E., Surf. Coat. Technol., 2009, vol. 203, p. 2863.Google Scholar
  121. 121.
    Ramazan, K. and Uʇur, Y., Trans. Inst. Met. Finish., 2014, vol. 92, p. 245.Google Scholar
  122. 122.
    Llayaraja, M., Mohan, S., Gnanamuthu, R.M., and Saravanan, G., Trans. Inst. Met. Finish., 2009, vol. 87, p. 145.Google Scholar
  123. 123.
    Kondo, K., Yokoyama, M., and Shinohara, K., J. Electrochem. Soc., 1995, vol. 142, p. 2256.Google Scholar
  124. 124.
    Katirci, R., Trans. Indian Inst. Met., 2010, vol. 63, p. 841.Google Scholar
  125. 125.
    Yogesha, S., Hegde, A.C., Trans. Indian Inst. Met., 2010, vol. 63, p. 841.Google Scholar
  126. 126.
    Chouchane, S., Levesque, A., Zabinski, P., et al., J. Alloys Compd., 2010, vol. 506, p. 575.Google Scholar
  127. 127.
    Levesque, A., Chouchane, S., Douglade, J., et al., Appl. Surf. Sci., 2009, vol. 255, p. 8048.Google Scholar
  128. 128.
    Yu, Y.D., Cao, Y., Li, M.G., et al., Mater. Res. Innovations, 2014, vol. 18, p. 314.Google Scholar
  129. 129.
    Rao, V.R., Bangera, K.V., and Hegde, A.C., J. Magn. Magn. Mater., 2013, vol. 345, p. 48.Google Scholar
  130. 130.
    Felloni, L., Fratesi, R., Quadrini, E., and Roventi, G., J. Appl. Electrochem., 1987, vol. 17, p. 574.Google Scholar
  131. 131.
    Thangaraj, V. and Chitharanjan Hegde, A., Indian J. Chem. Technol., 2007, vol. 14, p. 246.Google Scholar
  132. 132.
    Beltowska-Lehman, E., Ozga, P., Swiatek, Z., and Lupi, C., Surf. Coat. Technol., 2002, vol. 151, p. 444.Google Scholar
  133. 133.
    Bhatnagar, P. and Free, M.L., Surf. Coat. Technol., 2006, vol. 200, p. 6083.Google Scholar
  134. 134.
    Mohan, S., Ravindran, V., Subramanian, B., and Saravanan, G., Trans. Inst. Met. Finish., 2009, vol. 87, p. 8.Google Scholar
  135. 135.
    Barceló, G., García, J., Sarret, M., et al., J. Appl. Electrochem., 1994, vol. 24, p. 1249.Google Scholar
  136. 136.
    Wykpis, K., Niedbała, J., Popczyk, M., et al., Russ. J. Electrochem., 2012, vol. 48, p. 1123.Google Scholar
  137. 137.
    Conrad, H., Corbett, J., and Golden, T.D., J. Electrochem. Soc., 2012, vol. 159, p. C29.Google Scholar
  138. 138.
    Hu, C.C., Tsay, C.H., and Bai, A., Electrochim. Acta, 2003, vol. 48, p. 90.Google Scholar
  139. 139.
    Ieffa, S., Bernasconi, R., Nobili, L., et al., Trans. Inst. Met. Finish., 2014, vol. 92, p. 321.Google Scholar
  140. 140.
    Blejan, D. and Muresan, L.M., Mater. Corros., 2013, vol. 64, p. 433.Google Scholar
  141. 141.
    Petrauskas, A. and Grincevičiene, L., J. Appl. Electrochem., 2009, vol. 39, p. 1579.Google Scholar
  142. 142.
    Abibsi, A., Dennis, J., and Short, N., Trans. Inst. Met. Finish., 1991, vol. 69, p. 145.Google Scholar
  143. 143.
    Albalat, R., Gómez, E., Müller, C., et al., J. Appl. Electrochem., 1991, vol. 21, p. 44.Google Scholar
  144. 144.
    Mathias, M.F. and Chapman, T.W., J. Electrochem. Soc., 1990, vol. 137, p. 102.Google Scholar
  145. 145.
    Tsybulskaya, L.S., Gaevskaya, T.V., Purovskaya, O.G., and Byk, T.V., Surf. Coat. Technol., 2008, vol. 203, p. 234.Google Scholar
  146. 146.
    Albalat, R., Gomez, E., Müller, C., et al., J. Appl. Electrochem., 1990, vol. 20, p. 635.Google Scholar
  147. 147.
    Nawrat, G., Piotrowski, J., Maciej, A. et al., Arch. Metall. Mater., 2010, vol. 55, p. 255.Google Scholar
  148. 148.
    Muresan, L.M., Eymard, J., Blejan, D., and Indrea, E., Stud. Univ. Babes-Bolyai, Chem., 2010, vol. 1, p. 37.Google Scholar
  149. 149.
    Katirci, R., Surf. Rev. Lett., 2015, vol. 22, p. 1550015.Google Scholar
  150. 150.
    Mathias, M.F. and Chapman, T.W., J. Electrochem. Soc., 1990, vol. 137, p. 102.Google Scholar
  151. 151.
    Mathias, M.F., Villa, C.M., and Chapman, T.W., J. Appl. Electrochem., 1990, vol. 20, p. 1.Google Scholar
  152. 152.
    Muralidhara, H.B., Arthoba Naik, Y., Sachin, H.P., and Venkatesha, T.V., Indian J. Chem. Technol., 2008, vol. 15, p. 155.Google Scholar
  153. 153.
    Lin, Z.F., Li, X.B., and Xu, L.K., Int. J. Electrochem. Sci., 2012, vol. 7, p. 12507.Google Scholar
  154. 154.
    Karwas, C. and Hepel, T., J. Electrochem. Soc., 1988, vol. 135, p. 839.Google Scholar
  155. 155.
    Shivakumara, S., Manohar, U., Arthoba Naik, Y., and Venkatesha, T.V., Bull. Mater. Sci., 2007, vol. 30, p. 455.Google Scholar
  156. 156.
    Pushpavanam, M. and Balakrishnan, K., J. Appl. Electrochem., 1996, vol. 26, p. 283.Google Scholar
  157. 157.
    Pedroza, G.A.G., de Souza, C.A.C., de Jesus, M.D., et al., Surf. Coat. Technol., 2014, vol. 258, p. 232.Google Scholar
  158. 158.
    Abou-Krisha, M.M., Assaf, F.H., and El-Naby, S.A., J. Solid State Electrochem., 2009, vol. 13, p. 879.Google Scholar
  159. 159.
    Fratesi, R. and Roventi, G., J. Appl. Electrochem., 1992, vol. 22, p. 657.Google Scholar
  160. 160.
    Ghaziof, S. and Gao, W., Appl. Surf. Sci., 2014, vol. 311, p. 635.Google Scholar
  161. 161.
    Abou-Krisha, M.M., Appl. Surf. Sci., 2005, vol. 252, p. 1035.Google Scholar
  162. 162.
    Yu, Y.D., Zhao, X.X., Li, M.G., et al., Surf. Eng., 2013, vol. 29, p. 743.Google Scholar
  163. 163.
    Lin, C.S., Lee, H.B., and Hsieh, S.H., Metall. Mater. Trans. A, 1999, vol. 30, p. 437.Google Scholar
  164. 164.
    Lee, E., Ahn, J., and Ma, C., Plat. Surf. Finish., 2001, vol. 88, p. 124.Google Scholar
  165. 165.
    Tozar, A. and Karahan, I.H., Appl. Surf. Sci., 2014, vol. 318, p. 15.Google Scholar
  166. 166.
    Wu, Z., Fedrizzi, L., and Bonora, P.L., Surf. Coat. Technol., 1996, vol. 85, p. 170.Google Scholar
  167. 167.
    Bajat, J.B., Petrović, A.B., and Maksimović, M.D., J. Serb. Chem. Soc., 2005, vol. 70, p. 1427.Google Scholar
  168. 168.
    Chen, C.J. and Wan, C.C., J. Electrochem. Soc., 1989, vol. 136, p. 2850.Google Scholar
  169. 169.
    Knodler, A., Raub, C., and Raub, E., Metalloberflache, 1985, vol. 39, p. 21.Google Scholar
  170. 170.
    Boonyongmaneerat,Y., Saengkiettiyut, K., Saenapitak, S., and Sangsuk, S., J. Mater. Eng. Perform., 2014, vol. 23, p. 302.Google Scholar
  171. 171.
    Ivanov, I., Valkova, T., and Kirilova, I., J. Appl. Electrochem., 2002, vol. 32, p. 85.Google Scholar
  172. 172.
    Jingyin, F., Guozheng, L., Wenli, X., and Jianghong, L., J. Wuhan Univ. Technol., Mater. Sci. Ed., 2006, vol. 21, p. 40.Google Scholar
  173. 173.
    Thangaraj, V., Ravishankar, K., and Chitharanjan Hegde, A., Chin. J. Chem., 2008, vol. 26, p. 2285.Google Scholar
  174. 174.
    Rahsepar, M. and Bahrololoom, M.E., Surf. Coat. Technol., 2009, vol. 204, p. 580.Google Scholar
  175. 175.
    Kalantary, M.R., Wilcox, G.D., and Gabe, D.R., Electrochim. Acta, 1995, vol. 40, p. 1609.Google Scholar
  176. 176.
    Kalantary, M.R., Wilcox, G.D., and Gabe, D.R., Br. Corros. J., 1998, vol. 33, p. 197.Google Scholar
  177. 177.
    Chawa, G., Wilcox, G., and Gabe, D., Trans. Inst. Met. Finish., 1998, vol. 76, p. 117.Google Scholar
  178. 178.
    Lin, C.S., Lee, H.B., and Hsieh, S.H., Metall. Mater. Trans. A, 2000, vol. 31, p. 475.Google Scholar
  179. 179.
    Ivanov, I. and Kirilova, I., J. Appl. Electrochem., 2003, vol. 33, p. 239.Google Scholar
  180. 180.
    Fei, J., Liang, G., Xin, W., et al., J. Univ. Sci. Technol. Beijing, 2005, vol. 12, p. 545.Google Scholar
  181. 181.
    Gabe, D.R. and Green, W.A., Surf. Coat. Technol., 1998, vol. 105, p. 195.Google Scholar
  182. 182.
    Kaneko, Y., Mizuta, Y., Nishijima, Y., and Hashimoto, S., J. Mater. Sci., 2005, vol. 40, p. 3231.Google Scholar
  183. 183.
    Chen, J.L., Liu, J.H., Li, S.M., and Yu, M., Mater. Corros., 2012, vol. 63, p. 607.Google Scholar
  184. 184.
    Fei, J.Y. and Wilcox, G.D., Surf. Coat. Technol., 2006, vol. 200, p. 3533.Google Scholar
  185. 185.
    Subbaiah, Y., Kaje, V., and Hegde, A.C., Anti-Corros. Methods Mater., 2011, vol. 58, p. 84.Google Scholar
  186. 186.
    Chang, L.M., Chen, D., Liu, J.H., and Zhang, R.J., J. Alloys Compd., 2009, vol. 479, p. 489.Google Scholar
  187. 187.
    Praveen, B.M. and Venkatesha, T.V., Int. J. Electrochem., 2011, vol. 2011, p. 1.Google Scholar
  188. 188.
    Ghaziof, S., Kilmartin, P.A., and Gao, W., J. Electroanal. Chem., 2015, vol. 755, p. 63.Google Scholar
  189. 189.
    Praveen, B.M. and Venkatesha, T.V., J. Alloys Compd., 2009, vol. 482, p. 53.Google Scholar
  190. 190.
    Zheng, H.-Y. and An, M.-Z., J. Alloys Compd., 2008, vol. 459, p. 548.Google Scholar
  191. 191.
    Panagopoulos, C.N., Georgarakis, K.G., and Agathocleous, P.E., Tribol. Int., 2003, vol. 36, p. 619.Google Scholar
  192. 192.
    Blejan, D., Bogdan, D., Pop, M., et al., Adv. Mater., 2011, vol. 5, p. 25.Google Scholar
  193. 193.
    Tuaweri, T.J. and Wilcox, G.D., Trans. Inst. Met. Finish., 2007, vol. 85, p. 245.Google Scholar
  194. 194.
    Hino, M., Murakami, K., Muraoka, K., et al., in Materials Science Forum, Trans Tech Publ., 2014, p. 1420.Google Scholar
  195. 195.
    Praveen, B.M. and Venkatesha, T.V., J. Alloys Compd., 2009, vol. 482, p. 53.Google Scholar
  196. 196.
    Tulio, P.C., Rodrigues, S.E.B., and Carlos, I.A., Surf. Coat. Technol., 2007, vol. 202, p. 91.Google Scholar
  197. 197.
    Müller, C., Sarret, M., and Benballa, M., Surf. Coat. Technol., 2002, vol. 162, p. 49.Google Scholar
  198. 198.
    Hammami, O., Dhouibi, L., Berçot, P., et al., Int. J. Corros., 2012, vol. 8, p. 1.Google Scholar
  199. 199.
    Blejan, D., Marconi, D., Pop, A., and Muresan, L.M., Stud. Univ. Babes-Bolyai, Chem., 2011, vol. 95. Blejan, D., Marconi, D., Pop, A., and Muresan, L.M., Stud. Univ. Babes-Bolyai, Chem., 2011, vol. 56, no. 1, p. 95.Google Scholar
  200. 200.
    Kumar, M.K.P., Venkatesha, T.V., Pavithra, M.K., and Shetty, A.N., Phys. Scr., 2011, vol. 84, p. 035601.Google Scholar
  201. 201.
    ASTM 519: Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating. ASTM Book of Standards, West Conshohocken, PA: ASTM Int.Google Scholar
  202. 202.
    Roventi, G., Fratesi, R., Della Guardia, R.A., and Barucca, G., J. Appl. Electrochem., 2000, vol. 30, p. 173.Google Scholar
  203. 203.
    Ghaziof, S. and Gao, W., J. Alloys Compd., 2015, vol. 622, p. 918.Google Scholar
  204. 204.
    Karahan, I.H. and Tozar, A., Trans. Inst. Met. Finish., 2014, vol. 92, p. 262.Google Scholar
  205. 205.
    Chandrappa, K.G. and Venkatesha, T.V., Mater. Corros., 2013, vol. 64, p. 831.Google Scholar
  206. 206.
    Hosseini, M., Abdolmaleki, M., and Ashrafpoor, S., Chin. J. Catal., 2012, vol. 33, p. 1817.Google Scholar
  207. 207.
    Hosseini, M.G., Abdolmaleki, M., and Ashrafpoor, S., J. Appl. Electrochem., 2012, vol. 42, p. 153.Google Scholar
  208. 208.
    Herraiz-Cardona, I., Ortega, E., and Pérez-Herranz, V., Electrochim. Acta, 2011, vol. 56, p. 1308.Google Scholar
  209. 209.
    Szczygieł, B., Laszczyńska, A., and Tylus, W., Surf. Coat. Technol., 2010, vol. 204, p. 1438.Google Scholar
  210. 210.
    Suliţanu, N., Pîrghie, C., and Brînzǎ, N., J. Optoelectron. Adv. Mater., 2006, vol. 8, p. 1889.Google Scholar
  211. 211.
    Ramasubramanian, M., Popov, B.N., and White, R.E., J. Electrochem. Soc., 1998, vol. 145, p. 1907.Google Scholar
  212. 212.
    Hino, M., Nishida, N., Hiramatsu, M., et al., Mater. Lett., 1998, vol. 34, p. 81.Google Scholar
  213. 213.
    Conde, A., Arenas, M.A., and de Damborenea, J.J., Corros. Sci., 2011, vol. 53, p. 1489.Google Scholar
  214. 214.
    Ivanov, I., Valkova, T., and Kirilova, I., J. Appl. Electrochem., 2002, vol. 32, p. 85.Google Scholar
  215. 215.
    Rahsepar, M. and Bahrololoom, M., Corros. Sci., 2009, vol. 51, p. 2537.Google Scholar
  216. 216.
    Jiang, Y., Liu, L., Zhai, C., et al., Thin Solid Films, 2005, vol. 484, p. 232.Google Scholar
  217. 217.
    Fei, J.-Y. and Wilcox, G., Surf. Coat. Technol., 2006, vol. 200, p. 3533.Google Scholar
  218. 218.
    Zheng, Z., Li, N., Wang, C.Q., et al., J. Power Sources, 2013, vol. 222, p. 88.Google Scholar
  219. 219.
    Sudhakar, R. and Venkatesha, V.T., Ind. Eng. Chem. Res., 2013, vol. 52, p. 6422.Google Scholar
  220. 220.
    Zheng, H.-Y., An, M.-Z., and Lu, J.-F., Appl. Surf. Sci., 2008, vol. 254, p. 1644.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  • N. Lotfi
    • 1
  • M. Aliofkhazraei
    • 1
    Email author
  • H. Rahmani
    • 2
  • Gh. Barati Darband
    • 1
  1. 1.Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares UniversityTehranIran
  2. 2.Faculty of Materials Science and Engineering, K.N. Toosi University of TechnologyTehranIran

Personalised recommendations