Advertisement

Polymer Science, Series D

, Volume 12, Issue 1, pp 35–40 | Cite as

Binders for Polymer Composite Materials Based on Epoxy Oligomers

  • A. P. Petrova
  • R. R. MukhametovEmail author
Article
  • 5 Downloads

Abstract

The properties of epoxy binders used for production of polymer composite materials are given. The differences between the binders of melt and solution type are demonstrated. The influence of the filler type on the structure and water resistance of the cured binder in the polymer composite material is considered. The temperature range of the binder processing is found.

Keywords:

binder binder of solution type binder of melt type adhesive binder mechanical properties rheological properties 

Notes

ACKNOWLEDGMENTS

This work was carried out as part of the implementation of the integrated research field 13.1 Binders for Polymer Composite Materials of Structural and Special Purpose (Strategic Directions for the Development of Materials and Technologies for Their Processing for the Period up to 2030 [1–3]).

REFERENCES

  1. 1.
    E. N. Kablov, “Innovations of the All-Russian Institute of Aviation Materials (VIAM) as part of implementing the Strategic Directions of Development of Materials and Technologies of Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). doi  https://doi.org/10.18577/2071-9140-2015-0-1-3-33
  2. 2.
    E. N. Kablov, “New generation materials,” Zashch. Bezop., No. 4, 28–29 (2014).Google Scholar
  3. 3.
    E. N. Kablov, “What to make the future from? Materials of the new generation and technologies of their creation and processing as the basis of innovation,” Kryl’ya Rodiny, No. 5, 8–18 (2016).Google Scholar
  4. 4.
    R. R. Mukhametov, A. P. Petrova, S. A. Ponomarenko, K. R. Akhmadieva, and B. F. Pavlyuk, “Effect of woven fibrous fillers of various types on the properties of the cured binder VS-2526K,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 3 (2018). doi  https://doi.org/10.18577/2307-6046-2018-0-3-28-36
  5. 5.
    R. R. Mukhametov, A. P. Petrova, S. A. Ponomarenko, and B. F. Pavlyuk, “Effect of woven fibrous fillers of various types on the properties of PCM based on the binder EDT-69N,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 4 (2018) (in press).Google Scholar
  6. 6.
    A. N. Babin, “Binders for new generation polymer composites,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 4 (2013). http://www.viamworks.ru. Accessed March 26, 2018.Google Scholar
  7. 7.
    M. V. Postnova and V. I. Postnov, “Experience in the development of non-autoclaved methods of PCM molding,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 4 (2014). doi  https://doi.org/10.18577/2307-6046-2014-0-4-6-6
  8. 8.
    N. N. Panina, M. A. Kim, Ya. M. Gurevich, M. M. Grigor’ev, L. V. Chursova, and A. N. Babin, “Binders for non-autoclaving molding of products from polymer composite materials,” Klei, Germetiki, Tekhnol., No. 10, 18–27 (2013).Google Scholar
  9. 9.
    E. N. Kablov, L. V. Chursova, A. N. Babin, R. R. Mukhametov, and N. N. Panina, “Developments of the All-Russian Institute of Aviation Materials in the field of melt binders for polymer composite materials,” Polim. Mater. Tekhnol. 2 (2), 37–42 (2016).Google Scholar
  10. 10.
    L. V. Chursova, N. N. Panina, T. A. Grebeneva, I. V. Terekhov, and K. I. Donetskii, “Thermosetting binders and polymer binders for polymer composites obtained by vacuum infusion,” Plast. Massy, Nos. 1–2, 57 (2018).Google Scholar
  11. 11.
    N. F. Lukina, L. A. Dement’eva, A. P. Petrova, T. A. Kirienko, and L. V. Chursova, “Adhesive binders for PCM components of a cellular structure,” Polym. Sci., Ser. D 9 (4), 387–391 (2016).Google Scholar
  12. 12.
    A. P. Petrova, L. A. Dement’eva, N. F. Lukina, and L. V. Chursova, “Adhesive binders for polymer composites based on coal and glass fillers,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 9 (2015). doi  https://doi.org/10.18577/2307-6046-2015-0-9-11-11
  13. 13.
    A. P. Petrova, N. F. Lukina, D. A. Mel’nikov, K. L. Besednov, and B. F. Pavlyuk, “Study of the properties of hardened adhesive binders,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 10 (2017). doi  https://doi.org/10.18577/2307-6046-2017-0-10-6-6
  14. 14.
    A. P. Petrova, N. F. Lukina, D. A. Mel’nikov, K. L. Besednov, and B. F. Pavlyuk, “Mechanical properties of cured adhesive binders,” Polym. Sci., Ser. D 11 (4), 352–354 (2018).Google Scholar
  15. 15.
    A. P. Petrova and T. V. Malysheva, Glues, Adhesive Binders, and Adhesive Prepregs: Textbook, Ed. by E. N. Kablov (Vseross. Nauchno-Issled. Inst. Aviats. Mater., Moscow, 2017) [in Russian].Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  1. 1.All-Russian Scientific Research Institute of Aviation MaterialsMoscowRussia

Personalised recommendations