Polymer Science, Series D

, Volume 12, Issue 1, pp 69–71 | Cite as

Analysis of the Effect of a Constant Magnetic Field on the Results of Infrared Thermography Quality Control of the Polymeric Parts

  • E. A. Kosenko
  • V. A. Zorin
  • N. I. BaurovaEmail author


This article studies the effect of a constant magnetic field (CMF) on the temperature signal characterizing premature curing of a binder during nondestructive testing of the polymeric materials by the infrared thermography method. Diagrams and thermographs, showing the change of the temperature distribution on the surface of the controlled specimen in case of the deviation of the curing agent amount from the norm by 5 wt % under the effect of the magnetic field, are presented. Orientational phenomena in the polymeric material under the influence of CMF are demonstrated by controlling the damping effect of the light energy in the polarized light. A replica of the magnetic state of the specimen is presented.


defect infrared tomography premature curing of the binder nondestructive test polymeric materials constant magnetic field 



  1. 1.
    GOST (State Standard) R 56787–2015: Polymer Composites. Nondestructive Inspection.Google Scholar
  2. 2.
    V. V. Murashov and A. F. Rumyantsev, “Defects of monolithic parts and multilayer structures made of polymer composite materials and methods for their detection. Part I. Defects of monolithic parts and multilayer structures made of polymer composite materials.” Scholar
  3. 3.
    I. I. Zaripova, “Visualization of the results of modeling the structure of a composite material,” Remont Vosstanov. Modernizatsiya, No. 1, 37–39 (2017).Google Scholar
  4. 4.
    A. Y. Sergeev and N. I. Baurova, “Studying residual strains in ring-shaped specimens made of polymer composite materials with unidirectional structure,” Polym. Sci., Ser. D 8 (4), 296–299 (2015).Google Scholar
  5. 5.
    V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Capillary hydrodynamics of oligomer binders,” Polym. Sci., Ser. D 9 (3), 322–325 (2016).Google Scholar
  6. 6.
    G. V. Malysheva and Y. Y. Shimina, “Influence of preparation technology on carbon-fiber composite component composition,” Fibre Chem. 46 (4), 237–240 (2014).Google Scholar
  7. 7.
    N. I. Baurova, “A method of imitation modeling that permits optimizing the properties of polymeric composite materials,” Polym. Sci., Ser. D 6 (3), 265–268 (2013).Google Scholar
  8. 8.
    N. N. Peschanskaya and A. B. Sinani, “Influence of the magnetic field on the nano-level deformation jumps in polymers,” Fiz. Tverd. Tela 50 (1), 177–181 (2008).Google Scholar
  9. 9.
    V. A. Zorin, N. I. Baurova, and E. A. Kosenko, “Features of research on the thermophysical properties of road-building materials,” Polym. Sci., Ser. D 11 (1), 72–76 (2018).Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  1. 1.Moscow Automobile and Road Construction State Technical UniversityMoscowRussia

Personalised recommendations