Advertisement

Polymer Science, Series D

, Volume 12, Issue 1, pp 1–4 | Cite as

Sealing Formulations on the Basis of Low-Molecular Dimethyl–Siloxane Rubber Modified by Amorphous Boron

  • V. Yu. ChukhlanovEmail author
  • O. G. Selivanov
  • N. V. Chukhlanova
Article
  • 5 Downloads

Abstract

Findings concerning the modification of low-molecular dimethyl-siloxane rubber, modified by the amorphous boron aiming at the development of the formulation resistant to the impact of neutron irradiations and possessing the technological advantages as compared with the formulations based on the polyolefins, are presented. It is shown that application of the amorphous boron as the filler enhances the values of some physical and chemical properties of the polymeric system, such as elasticity, hardness, and adhesion to the metal and glass base. The optimum content of the amorphous boron in the formulation is determined.

Keywords:

amorphous boron polyorganosiloxanes polydimethylsiloxane SKTN-A rubber K-18 catalyst neutron irradiation 

Notes

REFERENCES

  1. 1.
    V. F. Kablov, N. A. Keibal, A. E. Mitchenko, Yu. Yu. Emel’yanova, Yu. I. Yumagulova, and S. P. Varfolomeeva, “Development of phosphorus-boron-nitrogen-containing modifier for elastomeric compositions,” Polym. Sci., Ser. D 9 (2), 172–175 (2015).Google Scholar
  2. 2.
    S. Nambiar and J. T. W. Yeow, “Polymer-composite materials for radiation protection,” ACS Appl. Mater. Interfaces 4, 5717–5726 (2012).Google Scholar
  3. 3.
    D. N. Es’kov, B. E. Bonshtedt, S. N. Koreshev, et al., RF Patent No. 2230759, Byull. Izobret., No. 17 (2004).Google Scholar
  4. 4.
    J. Bell, D. Lail, C. Martin, and P. Nguyen, “Radiation shielding for a lunar base,” in NASA Report: National Aeronautics and Space Administration (Washington, DC, 2011).Google Scholar
  5. 5.
    V. Yu. Chukhlanov and O. G. Selivanov, “Electrical properties of syntactic foams based on hollow carbon microspheres and polydimethylsiloxane,” Russ. Phys. J. 59 (7), 944–948 (2016).Google Scholar
  6. 6.
    A. P. Petrova and A. B. Laptev, “Phenolic rubber adhesives modified with carboranes,” Klei, Germetiki, Tekhnol., No. 6, 2–6 (2017).Google Scholar
  7. 7.
    V. Yu. Chukhlanov, S. S. Kriushenko, and N. V. Chukhlanova, “Elastic polyurethane foams modified by tetraethoxysilane,” Theor. Found. Chem. Eng. 49 (4), 518–522 (2015).Google Scholar
  8. 8.
    Li Chen, Songgang Chai, Kai Liu, Nanying Ning, et al., “Silica composites mechanical properties by introducing graphene oxide to the interface,” Enhanced Epoxy, ACS Appl. Mater. Interfaces 4 (8), 4398–4404 (2012).Google Scholar
  9. 9.
    V. Yu. Chukhlanov, O. G. Selivanov, and N. V. Chukhlanova, “A sealant based on polydimethylsiloxane modified with gallium oxide,” Polym. Sci., Ser. D 11 (2), 165–168 (2018).Google Scholar
  10. 10.
    M. A. Yarmolenko, A. A. Rogachev, A. V. Rogachou, and D. L. Gorbochev, “Kinetic characteristics of dispersion of organosilicon compounds in vacuum and molecular structure of the coatings, deposited from volatile products of dispersion,” Probl. Phys. Math. Tech. 8 (3), 32–38 (2011).Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  • V. Yu. Chukhlanov
    • 1
    Email author
  • O. G. Selivanov
    • 1
  • N. V. Chukhlanova
    • 1
  1. 1.Vladimir State UniversityVladimirRussia

Personalised recommendations