Advertisement

Technical Physics

, Volume 63, Issue 12, pp 1730–1735 | Cite as

Magnetohydrodynamic Model of a 3D Printer for Steel Melt

  • V. B. OshurkoEmail author
  • A. M. Mandel’Email author
  • A. A. ShartsEmail author
  • K. G. SolomakhoEmail author
GASES AND LIQUIDS

Abstract

The main problems of the development of 3D printers for machine engineering are related to low rate of printing and low quality of fabricated items. The problems can be solved using a new principle of high-efficiency 3D printing for steel melt based on the compression of the melt jet by magnetic field of flowing current and an increase in the crystallization temperature. Under certain conditions, the heat liberation of current can be compensated for using alternative processes. Ranges of parameters at which the effect can be implemented are determined.

Notes

REFERENCES

  1. 1.
    I. V. Shishkovsky, I. A. Yadroitsev, and I. Yu. Smurov, Tech. Phys. Lett. 39, 1081 (2013).ADSCrossRefGoogle Scholar
  2. 2.
    M. M. Pant, Phys. Earth Planet. Inter. 17 (2), 14 (1978).ADSCrossRefGoogle Scholar
  3. 3.
    M. S. Tillack and N. B. Morley, Magnetohydrodynamics, 14th ed. (McGraw-Hill, New York, 1998).Google Scholar
  4. 4.
    F. M. White, Fluid Mechanics, 7th ed. (McGraw-Hill, New York, 2011).Google Scholar
  5. 5.
    E. R. Parker, Materials Data Book for Engineers and Scientists (McGraw-Hill, New York, 1967).Google Scholar
  6. 6.
    H. Schlosser, P. Vinet, and J. Ferrante, Phys. Rev. B 40, 5929 (1989).ADSCrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  1. 1.Moscow State Technological University STANKINMoscowRussia

Personalised recommendations