Advertisement

Mechanical Characteristics of Steels with a Gas-Phase Nickel Coating

  • 2 Accesses

Abstract

A promising method of corrosion protection of steel parts in chemical engineering is a gas-phase coating, which has a high density and chemical stability to the influence of fluorine and good adhesion to substrate over entire coating area even for parts of complex shapes. The characteristics of the static and fatigue fracture of BSt.3sp, 40, and E10 steels are considered after coating with gas-phase nickel of different thicknesses (5, 10, 20, 50, and 100 μm) at various substrate temperatures (130, 160, 180, and 200°C). The gas-phase nickel coating 30 μm thick of steel parts can be considered useful due to its high chemical stability and the simplicity of the technological process in spite of some decrease in the mechanical characteristics.

This is a preview of subscription content, log in to check access.

Access options

Buy single article

Instant unlimited access to the full article PDF.

US$ 39.95

Price includes VAT for USA

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.

REFERENCES

  1. 1

    G. V. Pachurin and K. G. Pachurin, “Fatigue failure of metals and alloys,” Technol. Met., No. 5, 7–11 (2005).

  2. 2

    G. V. Pachurin, “Service life of plastically treated steels and welded joints,” Kuznechno-Shtamp. Proizvodstvo. Obrab. Mater. Davleniem, No. 12, 3–8 (2004).

  3. 3

    A. A. Filippov, G. V. Pachurin, V.I. Naumov, and N. A. Kuzmin, “Low-cost treatment of rolled products used to make long high-strength bolts,” Metallurgist 59 (9, 10), 810–815 (2016).

  4. 4

    A. A. Filippov, G. V. Pachurin, Yu. I. Matveev, and N. A. Kuz’min, “Comparison of technological methods of preparation of structural–mechanical properties of rolled steel surfaces for heat forming of metallic products to decrease the influence of dangerous and harmful factors on workers,” Fundament. Issled., No. 10–1, 88–96 (2016).

  5. 5

    G. V. Pachurin and V. A. Vlasov, “Mechanical properties of sheet structural steels at operating temperatures,” Met. Sci. Heat Treat. 56 (3, 4), 219–223 (2014).

  6. 6

    G. V. Pachurin, “Life of deformed steels in air and a corrosive medium,” Technol. Met., No. 12, 29–35 (2014).

  7. 7

    G. V. Pachurin, “Ruggedness of structural material and working life of metal components,” Steel in Translation 38 (3), 217–220 (2008).

  8. 8

    I. I. Novikov, Defects of Crystal Structure of Metals (Metallurgiya, Moscow, 1983).

  9. 9

    L. D. Sokolov and G. P. Guslyakova, “On the identification of thermally activated mechanisms controlling the fatigue phenomenon,” Izv. Akad. Nauk SSSR, Ser. Met., No. 4, 141–145 (1979).

  10. 10

    G. V. Karpenko, V. I. Pokhmurskii, V. B. Denisov, and V. S. Zamikhovskii, Effect of Diffusion Coatings on the Strength of Steel Products (Naukova Dumka, Kyiv, 1971).

Download references

Author information

Correspondence to G. V. Pachurin.

Additional information

Translated by Yu. Ryzhkov

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Pachurin, G.V., Kuz’min, N.A., Filippov, A.A. et al. Mechanical Characteristics of Steels with a Gas-Phase Nickel Coating. Russ. Metall. 2019, 1407–1409 (2019). https://doi.org/10.1134/S0036029519130251

Download citation

Keywords:

  • steels
  • gas-phase nickel coating
  • mechanical properties