Russian Metallurgy (Metally)

, Volume 2019, Issue 13, pp 1427–1432 | Cite as

Life Cycle of Products Made of Polymer Composite Materials

  • V. A. NelyubEmail author


The life cycles of products made of metal and polymer composite materials are considered, and their common and distinctive features are determined. Using the mirror of a space antenna (made of carbon-filled plastic) as an example, we analyze the influence of auxiliary materials on the quality indices. A technique is developed to determine the influence of auxiliary materials on the phase composition (polymer matrix content is determined by thermogravimetry). A structure for forming carbon-filled plastic products using vacuum infusion and a system for the implementation of competitive design-technological solutions are presented for the manufacture of carbon-filled plastic products.


life cycle carbon-filled plastic technology technological operations and transitions 



This work was performed in terms of the project Scientific Investigations for Developing Composite Materials with a Controlled Chaos Structure and Their Application in Hi-Tech Production, project no. 11.7291.2017/BCh.


  1. 1.
    Yu. A. Mikhailin, Fibrous Polymer Composite Materials in Engineering (Izd. Nauchnye Isnovy Tekhn., St. Petersburg, 2013).Google Scholar
  2. 2.
    A. P. Petrova and G. V. Malysheva, Glues, Glue Binders, and Glue Prepregs, Ed. by E. N. Kablov (VIAM, 2017).Google Scholar
  3. 3.
    S. L. Bazhenov, A. A. Berlin, A. A. Kul’kov, and V. G. Oshmyan, Polymer Composite Materials (Izd. Dom Intellekt, Dolgoprudyi, 2010).Google Scholar
  4. 4.
    N. I. Baurova and V. A. Zorin, Technological Heredity during the Production of Machine Components from Polymer Composite Materials: A Monograph (MADI, Moscow, 2018).Google Scholar
  5. 5.
    V. A. Zorin, N. I. Baurova, and A. M. Shakurova, “Investigation of the structure of an encapsulated anaerobic adhesive,” Polym. Sci., Ser. D 7 (4), 303–305 (2014).Google Scholar
  6. 6.
    V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Viscous hysteresis in filled siloxane binders,” Polym. Sci., Ser. D 10 (1), 19–22 (2017).Google Scholar
  7. 7.
    A. N. Marycheva, T. A. Guzeva, P. M. P’e, L. Kh. Tun, and G. V. Malysheva, “Technologies of production of layered composites,” Tekhnol. Metallov, No. 10, 7–12 (2018).Google Scholar
  8. 8.
    N. I. Baurova, “Influence of nanostructured in carbon fibers and ribbons on sensor properties,” Polym. Sci., Ser. D 4 (3), 242–245 (2011).Google Scholar
  9. 9.
    N. I. Baurova, V. A. Zorin, and V. M. Prikhodko, “Description of scenarios of transition of material from an operable to inoperable stage using an equation of fold catastrophe theory,” Polym. Sci., Ser. D 8 (1), 1–5 (2015).Google Scholar
  10. 10.
    I. A. Buyanov and D. S. Vdovin, “Development of a method for designing and technology of broaching preforms for producing carbon fiber reinforced plastics,” Klei. Germetiki. Tekhnologii, No. 10, 22–24 (2016).Google Scholar
  11. 11.
    A. G. Suslov and A. M. Dal’skii, Scientific Fundamentals of Manufacturing Engineering (Mashinostroenie, Moscow, 2002).Google Scholar
  12. 12.
    A. V. Skvortsov and A. G. Skhirtladze, Fundamentals of the Technology of Automated Machine Building Production (Mashinostroenie, Moscow, 2017).Google Scholar
  13. 13.
    P. P. Maung and G. V. Malysheva, “Technology of production of a space antenna reflector,” in All Materials.Encyclopedic Handbook (2017), Vol. 5, pp. 11–15.Google Scholar
  14. 14.
    M. A. Gorodetskii, E. S. Tepishkina, and P. I. Chirva, “Typical problems in choosing auxiliary materials for the infusion technologies of formation of articles made of glass reinforced plastics,” in All Materials.Encyclopedic Handbook (2017), Vol. 4, pp. 60–65.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  1. 1.Bauman Moscow State Technical UniversityMoscowRussia

Personalised recommendations