Advertisement

Journal of Applied Mechanics and Technical Physics

, Volume 59, Issue 6, pp 1118–1125 | Cite as

Presenting a Model for Prediction of Crack Growth Under Simultaneous Creep and Corrosion

  • M. ZarkeshEmail author
Article
  • 3 Downloads

Abstract

The process of crack growth in parts subjected to hot fluids is studied. The high temperature of the fluid activates the creep and corrosion processes. The hereditary creep theory is used for calculating the stress field. A creep function is introduced to determine the forces acting on the crack at the crack concealment and crack growth stages. The resisting force is calculated by using the Rabotnov method of accumulated small fractures in the crack region. The effect of the corrosive environment is considered in the calculations by using the penetration function. The resultant equations are solved by using the MATLAB software. The effects of the initial crack length and the applied stress on the crack growth curve are investigated.

Keywords

crack growth creep function hereditary crack theory corrosive environment critical length of the crack 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Mechanochemistry of Metals and Corrosion Protection, Ed. by E. M. Gutman and A. N. Akimov (Metallurgy, Moscow, 1981) [in Russian].Google Scholar
  2. 2.
    V. S. Pavlina, “The Diffusion Saturation of Alloys in the Conditions of Complexation,” Phys.-Chem. Mech. Materials, No. 6, 29–34 (1984).Google Scholar
  3. 3.
    D. A. Kulagin and A. M. Lokoshchenko, “Modeling the Effect of Aggressive Environment on Creep of Metals under Complex Stress State,” Mech. Solid Bodies, No. 1, 188–199 (2004).Google Scholar
  4. 4.
    M. Zarkesh and G. K. Murzakhanov, “Crack Growth Curve Analysis in Cylindrical Shells under the Influence of Constant Mechanical Load and Corrosive Environments with the Help of Damage Functions,” Iran. J. Mech. Eng. Trans. ISME, No. 1, 40–50 (2012).Google Scholar
  5. 5.
    V. V. Bolotin and B. V. Minakov, “Crack Growth and Fracture in Creep,” Solid Mech., No. 3, 147–156 (1992).Google Scholar
  6. 6.
    V. V. Bolotin, A. A. Babkin, and I. L. Belousov, “Probabilistic Model of Early Fatigue Crack Growth,” Probab. Eng. Mech., No. 3, 227–232 (1998).CrossRefGoogle Scholar
  7. 7.
    M. Fakoor and N. Mehri Khansari, “Simulation of Orthotropic Damaged Zone Behavior using Viscoelastic Models,” Amirkabir J. Mech. Eng., No. 4, 149–152 (2017).Google Scholar
  8. 8.
    Yu. N. Rabotnov, Creep Problems in Structural Members (Elsevier, Amsterdam–London, 1969).zbMATHGoogle Scholar
  9. 9.
    Yu. N. Rabotnov, Elements of Hereditary Solid Mechanics (Nauka, Moscow, 1977) [in Russian].Google Scholar
  10. 10.
    D. Krajcinovic, “Continuum Damage Mechanics: When and How?” Int. J. Damage Mech., No. 4, 217–229 (1995).CrossRefGoogle Scholar
  11. 11.
    V. V. Bolotin, Prediction of Machine and Structures Resources (Mashinostroyeniye, Moscow, 1984) [in Russian].Google Scholar
  12. 12.
    V. L. Bogoyavlenski, Corrosion of Steels at the NPP (Energoatom, Moscow, 1984) [in Russian].Google Scholar
  13. 13.
    V. Z. Parton and E. M. Morozov Mechanics of Elastic-Plastic Fracture: Fundamentals of Fracture Mechanics (ComBook, Moscow, 2007) [in Russian].Google Scholar
  14. 14.
    G. R. Irwin, “Analysis of Stresses and Strain Near the End of a Crack Traversing a Plate,” Trans. ASME, J. Appl. Mech., No. 24, 361–364 (1960).Google Scholar
  15. 15.
    R. A. Chapri, “Correspondence Principles and a Generalized J Integral for Large Deformation and Fracture Analysis of Viscoelastic Media,” Int. J. Fracture Mech., No. 1, 195–233 (1984).Google Scholar
  16. 16.
    G. K. Murzakhanov, Methods for Assessing Structural Stability of Pipelines (MPEI, Moscow, 2009) [in Russian].Google Scholar
  17. 17.
    M. Zarkesh and G. K. Murzakhanov, “Evaluation of the Initial Crack Depth Influence on the Lifetime of Pipelines and Storage Tanks at a Creep,” Bull. Mech. Eng., No. 2, 40–44 (2011).Google Scholar
  18. 18.
    R. G. Stephens and H. O. Fuchs, Metal Fatigue in Engineering (Wiley, 1990).Google Scholar

Copyright information

© Pleiades Publishing, Inc. 2018

Authors and Affiliations

  1. 1.Faculty of Mechanical Engineering, University Islamic AzadDashtestan branchDashtestanIran

Personalised recommendations