Advertisement

Journal of Applied Mechanics and Technical Physics

, Volume 59, Issue 6, pp 1067–1077 | Cite as

Torsion Of Solid Rods with Account for the Different Resistance of the Material to Tension and Compression Under Creep

  • I. A. Banshchikova
  • A. Yu. Larichkin
Article
  • 1 Downloads

Abstract

Experiments on tension and compression of solid samples cut out from a 60-mm thick plate of an Ti–Al–Sn–V alloy at a temperature of 700◦C are used to determine that this alloy possesses small anisotropy and a different resistance to tension and compression under creep. The approximations of the power law of creep are obtained for each series of these experiments and each direction in the plate. Two models based on the transformed space of stresses are used to simulate the torsion of solid samples. The models account for the different resistance to tension and compression under creep. A series of experiments are carried out on the torsion of solid round rods cut out in the normal direction of the plate. It is shown that the computational and experimental results satisfactorily agree.

Keywords

experiment creep different resistance to tension and compression under creep anisotropy rod torsion titanium alloy 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    G. A. Raevskaya, K. Zakharchenko, and A. Larichkin, “Determination of Optimum Parameters of the Technological Process for Plates Forming from V95 and V-1461 Alloys in Creep Applied in Aircrafts Constructed by ‘Sukhoi Design Bureau’,” J. Phys.: Conf. Ser. 894, 012078 (2017).Google Scholar
  2. 2.
    A. C. L. Lam, Zh. Shi, H. Yang, et al., “Creep-Age Forming AA2219 Plates with Different Stiffener Designs and Pre-Form Age Conditions: Experimental and Finite Element Studies,” J. Mater. Process. Technol. 219, 155–163 (2015).CrossRefGoogle Scholar
  3. 3.
    I. A. Banshchikova and I. Yu. Tsvelodub, “On One Class of Inverse Problems of Variation in Shape of Viscoelastic Plates,” Prikl. Mekh. Tekh. Fiz. 37 (5), 122–131 (1996) [J. Appl. Mech. Tech. Phys. 37 (5), 876–883 (1996)].zbMATHGoogle Scholar
  4. 4.
    I. A. Banshchikova and V. A. Blinov, “Experimental and Theoretical Analysis of the Deformation of Transversely Isotropic Plates under Creep Conditions,” Prikl. Mekh. Tekh. Fiz. 57 (3), 129–138 (2016) [J. Appl. Mech. Tech. Phys. 57 (3), 501–509 (2016)].MathSciNetGoogle Scholar
  5. 5.
    A. Yu. Larichkin, K. V. Zakharchenko, B. V. Gorev, and V. I. Kapustin, “Physical Simulation of the Technological Process of Shaping of Structural Elements of B95 Aluminum under Creep Conditions,” Obr. Metal. 70 (1), 6–15 (2016).Google Scholar
  6. 6.
    A. Larichkin, K. Zakharchenko, B. Gorev, et al., “Influence of the Creep Ageing Process on the Fatigue Properties of Components from V95pchT2 (Analog 7175T76) and V95ochT2 (Analog 7475) Aluminium Alloys,” J. Phys.: Conf. Ser. 894, 012050 (2017).Google Scholar
  7. 7.
    B. V. Gorev and A. F. Nikitenko, “Creep of the Material with Different Tensile and Compression Characteristics,” in Dynamics of Continuous Media, No. 6 (Inst. of Hydrodynamics, Sib. Branch, USSR Acad. of Sci., Novosibirsk, 1970), pp. 106–110.Google Scholar
  8. 8.
    B. V. Gorev, V. V. Rubanov, and O. V. Sosnin, “Construction of the Creep Equations for Materials with Different Extension and Compression Properties,” Prikl. Mekh. Tekh. Fiz. 20 (4), 121–128 (1979) [J. Appl. Mech. Tech. Phys. 20 (4), 487–492 (1979)].Google Scholar
  9. 9.
    B. V. Gorev, V. V. Rubanov, and O. V. Sosnin, “Creep of Materials with Different Properties in Tension and Compression,” Probl. Prochn., No. 7, 62–67 (1979). [Strength Mater. 11 (7), 735–740 (1979)].Google Scholar
  10. 10.
    B. V. Gorev, O. V. Sosnin, and I. V. Lyubashevskaya, “Creep of Materials with Different Properties in Tension and Compression,” in Proc. of the 4th All-Russian Conf. with Int. Participation, Samara, May 29–31, 2007 Vol. 1 (Samara State Tech. Univ., Samara, 2007).Google Scholar
  11. 11.
    A. A. Zolochevskii, Nonlinear Mechanics of a Deformed Solid (Biznes Inverstor Grupp, Kharkov, 2011) [in Russian].Google Scholar
  12. 12.
    I. Yu. Tsvelodub, Stability Postulate and Its Applications in the Theory of Creep of Metallic Materials (Inst. of Hydrodynamics, Acad. of Sci. of the USSR, 1991) [in Russian].Google Scholar
  13. 13.
    I. Yu. Tsvelodub, “Creep of Materials with Different Properties in Tension and Compression,” in Dynamics of Continuous Media, Nos. 19/20 (Inst. of Hydrodynamics, Sib. Branch, USSR Acad. of Sci., Novosibirsk, 1974), pp. 147–155.Google Scholar
  14. 14.
    I. A. Banshchikova, A. E. Murav’eva, and I. Yu. Tsvelodub, “Calculating the Plates Made of a Strengthening Material with a Different Resistance to Creep and Compression under Tension,” Obr. Metal. 65 (4), 68–77 (2014).Google Scholar
  15. 15.
    I. A. Banshchikova, B. V. Gorev, and I. Yu. Tsvelodub, “Creep of Plates Made of Aluminum Alloys under Bending,” Prikl. Mekh. Tekh. Fiz. 48 (5), 156–159 (2007) [J. Appl. Mech. Tech. Phys. 48 (5), 751–754 (2007)].Google Scholar
  16. 16.
    B. D. Annin, A. I. Oleinikov, and K. S. Bormotin, “Modeling of Forming of Wing Panels of the SSJ-100 Aircraft,” Prikl. Mekh. Tekh. Fiz. 51 (4), 155–165 (2010) [J. Appl. Mech. Tech. Phys. 51 (4), 579–589 (2010)].zbMATHGoogle Scholar
  17. 17.
    I. Yu. Tsvelodub, “Construction of Constitutive Equations of Creep in Orthotropic Materials with Different Properties under Tension and Compression,” Prikl. Mekh. Tekh. Fiz. 53 (6), 98–101 (2012) [J. Appl. Mech. Tech. Phys. 53 (6), 888–890 (2012)].zbMATHGoogle Scholar
  18. 18.
    I. A. Banshchikova, D. M. Petrov, and I. Yu. Tsvelodub, “Torsion of Circular Rods at Anisotropic Creep,” J. Phys.: Conf. Ser. 722 (1), 012004 (2016).Google Scholar
  19. 19.
    I. A. Banshchikova, I. Yu. Tsvelodub, and D. M. Petrov, “Deformation of Structural Elements Made of Alloys with a Lower Resistance to Creep Strains in the Shear Direction,” Uchen. Zap. Kazan. Univ., Ser. Fiz.-Mat. Nauki 157 (3), 34–41 (2015).Google Scholar
  20. 20.
    A. Yu. Larichkin and B. V. Gorev, “Constructing Shear Creep Strains from the Pure Torsion of Solid Round Shafts,” Nauch. Tekh. Vedom. St.-Peterb. Gos. Politekh. Univ., Fiz.-Mat. Nauki 4 (177), 212–219 (2013).Google Scholar

Copyright information

© Pleiades Publishing, Inc. 2018

Authors and Affiliations

  1. 1.Lavrent’ev Institute of Hydrodynamics, Siberian BranchRussian Academy of SciencesNovosibirskRussia

Personalised recommendations