Advertisement

Fluid Dynamics

, Volume 53, Issue 5, pp 702–710 | Cite as

Experimental and Numerical Investigation of Heat Exchange between Underexpanded High-Enthalpy Air Jets and Cylindrical Models

  • A. N. Gordeev
  • A. F. KolesnikovEmail author
  • V. I. Sakharov
Article
  • 11 Downloads

Abstract

Experiments on heat transfer in supersonic underexpanded high-enthalpy air jets are conducted on the VGU-4 induction plasmatron at the pressure in the compression chamber of 8.5 hPa. At the air flow rate of 3.6 g/s and the high-frequency generator powers of 45 kW(regime 1) and 64 kW (regime 2) the heat fluxes to the copper surface at the stagnation point of watercooled cylindrical models along the axes of dissociated air jets are measured. The models, 30 mm in diameter, could have a flat face or a hemispherical nose. In the same regimes, the stagnation pressures are measured using the Pitot tube in the shape of a cylinder, 30 mm in diameter, having either a flat face or a hemispherical bluntness with a receiving hole, 14 mm in diameter. For the experimental conditions calculations of flows in the plasmatron discharge channel and supersonic underexpanded jets issuing from the discharge channel are performed within the framework of the Navier–Stokes and Maxwell equations. The heat fluxes to the experimental models are computed and compared with the experimental data.

Keywords

high-frequency plasmatron dissociated air underexpanded jets heat flux stagnation pressure numerical calculations 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    C. Park, Nonequilibrium Hypersonic Aerothermodynamics (Wiley, New York, 1990).Google Scholar
  2. 2.
    A. F. Kolesnikov, “Conditions of Simulation of Stagnation Point Heat Transfer from a High-Enthalpy Flow,” Fluid Dynamics 28 (1), 131 (1993).ADSCrossRefzbMATHGoogle Scholar
  3. 3.
    A. F. Kolesnikov, “Conditions of the Local Similarity of the Thermochemical Interaction of High-Enthalpy Gas Flows with an Indestructible Surface,” Teplofiz. Vys. Temp. 52 (1), 118 (2014).Google Scholar
  4. 4.
    A. F. Kolesnikov and V. I. Sakharov, “Similarity between the Heat Transfer to a Model in an Underexpanded Dissociated-Air Jet of a High-Frequency Plasmatron and to a Sphere in a High-Velocity Flow in the Terrestrial Atmosphere,” Fluid Dynamics 51 (3), 400 (2016).MathSciNetCrossRefzbMATHGoogle Scholar
  5. 5.
    A. N. Gordeev and A. F. Kolesnikov, “Induction Plasmatrons of the VGU Series,” in: Topical Problems of Mechanics. Physical and Chemical Dynamics of Liquids and Gases [in Russian] (Nauka, Moscow, 2010), p. 151.Google Scholar
  6. 6.
    N. E. Afonina, S. A. Vasil’evskii, V. G. Gromov, A. F. Kolesnikov, I. S. Pershin, V. I. Sakharov, and M. I. Yakushin, “Flow and Heat Transfer in Underexpanded Air Jets Issuing from the Sonic Nozzle of a Plasma Generator,” Fluid Dynamics 37 (5), 803 (2002).CrossRefzbMATHGoogle Scholar
  7. 7.
    V. I. Sakharov, “NumericalSimulation of Thermally and ChemicallyNonequilibriumFlows and Heat Transfer in Underexpanded Induction Plasmatron Jets,” Fluid Dynamics 42 (6), 1007 (2007).ADSCrossRefzbMATHGoogle Scholar
  8. 8.
    A. N. Gordeev, A. F. Kolesnikov, and V. I. Sakharov, “Flow and Heat Transfer in Underexpanded Nonequilibrium Jets of an Induction Plasmatron,” Fluid Dynamics 46 (4), 623 (2011).ADSCrossRefzbMATHGoogle Scholar
  9. 9.
    V.A. Bashkin, I.V. Egorov, B. E. Zhestkov, and V. V. Shvedchenko, “Numerical Investigation of the Flowfield and Heat Transfer in the Duct of a High-Temperature Aerodynamic Setup,” Teplofiz. Vys. Temp. 46 (5), 771 (2008).Google Scholar
  10. 10.
    A. B. Gorshkov, “Numerical Modeling of Flow past Models in the Jet of a High-Frequency Plasmatron,” Kosmonavt. Raketostr., No. 3 (36), 54 (2004).Google Scholar
  11. 11.
    V. I. Vlasov, “Theoretical Investigation of High-Temperature Gas Flow in the Discharge and Working Chambers of a HF Plasmatron,” Kosmonavt. Raketostr., No. 23, 18 (2003).Google Scholar
  12. 12.
    I. V. Egorov, B. E. Zhestkov, and V. V. Shvedchenko, “Determination of the Catalytic Activity ofMaterials at High Temperatures in the Hypersonic VAT-104 Wind Tunnel,” Uch. Zap. TsAGI 45 (1), 3 (2014).CrossRefGoogle Scholar
  13. 13.
    N. E. Afonina, V. G. Gromov, and V. I. Sakharov, “HIGHTEMP Technique of High Temperature Gas Flows Numerical Simulations,” in: Proc. 5th Europ. Symp. on Aerothermodyn. Space Vehicles. Cologne, Germany, 2004. SP 563 (ESTEC, Noordwijk, 2004), p. 323.Google Scholar
  14. 14.
    V. P. Glushko et al., Thermodynamic Properties of Individual Materials [in Russian] (Nauka, Moscow, 1978), Vols. 1, 2.Google Scholar
  15. 15.
    S. A. Vasil’evskii and A. F. Kolesnikov, “Numerical Simulation of Equilibrium Induction Plasma Flows in a Cylindrical Plasmatron Channel,” Fluid Dynamics 35 (5), 769 (2000).CrossRefzbMATHGoogle Scholar
  16. 16.
    E. P. Simonenko, N. P. Simonenko, A. N. Gordeev, A. F. Kolesnikov, V.G. Sevastyanov, and N. T. Kuznetsov, “Sol Gel Synthesis of Ultra-High-Temperature Ceramic HfB2-SiC Materials and Investigation of Their Behavior in High-Enthalpy Air Flows,” in: Promising Technologies, Materials, and Instruments for Space Research and On-Ground Applications. Collection of Brief Papers. 8th Intern. Conf. “Space Challenge of the 21st Century. Promising Technologies, Materials, and Instruments for Space Research (SPACE’2017),” Sochi, October 16–21, 2017, ISBN978-5-91845-076-5, p. 91.Google Scholar

Copyright information

© Pleiades Publishing, Inc. 2018

Authors and Affiliations

  • A. N. Gordeev
    • 1
  • A. F. Kolesnikov
    • 1
    Email author
  • V. I. Sakharov
    • 2
  1. 1.Ishlinsky Institute for Problems in MechanicsRussian Academy of SciencesMoscowRussia
  2. 2.Institute of MechanicsMoscow State UniversityMoscowRussia

Personalised recommendations