Abstract
A simple mathematical model of thermal polishing of rough glass surface as observed by light beam thermal analysis (LBTA) is presented. The rough surface is represented by a triangular profile used for calculation of the light beam intensity attenuation and an equivalent rectangular profile is used for the modeling of the time course of the thermal polishing. Computational results obtained for the NBS 711 viscosity standard glass showed that the characteristic temperature, obtained from the series of LBTA experiments after extrapolation to zero starting surface roughness, does not represent the glass transition temperature, but it corresponds to the viscosity value of about 109 dPa.s. The validity of the proposed model was confirmed by the comparison of simultaneous LBTA and viscosity measurements of CaO-Y2O3-Al2O3-SiO2 glasses.
Similar content being viewed by others
References
P. Lichvár, D. Galusek and M. Liška, Ceramics, 46 (2002) 74.
P. Lichvár, Ph.D. thesis, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Bratislava 2003.
J. Majling, Š. Svetík, J. Annus, J. Krištín and P. M. Marquis, Chem. Pap., 51 (1997) 268.
J. Majling, V. Kremničan, R. Ďurovčíková and Š. Svetík, J. Therm. Anal. Cal., 57 (1999) 587.
J. M. Hutchinson, J. Therm. Anal. Cal., 72 (2003) 619.
G. W. Scherer, J. Non-Crystalline Solids, 123 (1990) 75.
A. Q. Tool, J. Amer. Ceram. Soc., 29 (1946) 240.
O. S. Narayanaswamy, J. Amer. Ceram. Soc., 54 (1971) 491.
G. Williams, D. C. Watts, B. S. Dev and A. M. North, Trans. Faraday Soc., 67 (1971) 1323.
S. M. Rekhson, A. V. Bulaeva and O. V. Mazurin, Sov. J. Inorg. Mater., 7 (1971) 622.
O. V. Mazurin, Steklovanie. Nauka, Leningrad 1986 (In Russian).
F. Lofaj and F. Dorčáková, Metallurgy, 42 (2003) 229.
F. Dorčáková, Unpublished results.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chromcíková, M., Liška, M. & Martišková, M. Kinetics of the thermal polishing of the rough glass surface. Journal of Thermal Analysis and Calorimetry 76, 107–113 (2004). https://doi.org/10.1023/B:JTAN.0000027809.27838.ad
Issue Date:
DOI: https://doi.org/10.1023/B:JTAN.0000027809.27838.ad