Abstract
This paper reports on measurements of crack growth by environmental assisted fracture (EAF) for 4340 steel in water and in air at various relative humidities. Of most interest is the observation of slow crack propagation in dry air. Fractographic analysis leads to the strong suggestion that this slow crack propagation is due to hydrogen cracking caused by internal hydrogen in solid solution inside the sample material.
Similar content being viewed by others
References
A. ATRENS and Z. F. WANG, Mater. Forum 19 (1995) 9.
M. O. SPEIDEL, in “Corrosion in power generating equipment” edited by M. O. Speidel and A. Atrens (Plenum, New York and London, 1984) p. 85.
R. AGDOWSKI-PEDRAZZOLI and M. O. SPEIDEL, in “Parkins Symposium on fundamental aspects of stress corrosion cracking”, edited by S. M. Bruemmer, E. I. Meletis, R. H. Jones, W. W. Gerberich, F. P. Ford and R. W. Staehle (TMS, Pennsylvania, 1992) p. 341.
S. JIN and A. ATRENS, Appl. Phys. A 42 (1987) 149.
Idem., ibid. 50 (1990) 287.
A. S. LIM and A. ATRENS, ibid. 53 (1992) 273.
Idem., ibid. 54 (1992) 500.
Z. F. WANG and A. ATRENS, Metall. Mater. Trans. 27A (1996) 2686.
Idem., Mater. Sci. Engng, accepted for publication.
A. ATRENS, Z. F. WANG, N. KINAEV, D. R. COUSENS and J. Q. WANG, in Proceedings of 13 International Corrosion Congress, Melbourne (1996) paper 233.
A. OEHLERT and A. ATRENS, Mater. Forum 17 (1993) 415.
Idem., Corrosion Sci. 38 (1996) 1159.
A. ATRENS, C. C. BROSNAN, S. RAMAMURTHY, A. OEHLERT and I. O. SMITH, Measurement Sci. Technol. 4 (1993) 1281.
S. RAMAMURTHY and A. ATRENS, Corrosion Sci. 34 (1993) 1385.
A. ATRENS and A. OEHLERT, J. Mater. Sci., submitted for publication.
J. SALMOND and A. ATRENS, Scripta Metall. Mater. 26 (1992) 1447.
R. M. RIECK, A. ATRENS and I. O. SMITH, Met. Trans. 20 A (1989) 889.
A. OEHLERT and A. ATRENS, Overview No 114 Acta Metall. Mater. 42 (1994) 1493.
A. ATRENS, R. M. RIECK and I. O. SMITH, in “ICF7 Advances in fracture research”, edited by K. Salama, K. Ravi-Chandar, D. M. R. Taplin and P. Rama Rao (Pergamon Press, Oxford, 1989) p. 1603.
A. OEHLERT and A. ATRENS, J. Mater. Sci., submitted for publication.
R. M. RIECK, A. ATRENS and I. O. SMITH, Mater. Forum 13 (1989) 48.
Idem., Ibid. 13 (1989) 54.
J. D. GATES, A. ATRENS and I. O. SMITH, Z. furWerkstofftechnik 18 (1987) 165.
Idem., ibid. 18 (1987) 179.
Idem., ibid. 18 (1987) 344.
J. SKOGSMO and A. ATRENS, Acta Metall. Mater. 42 (1994) 1139.
S. RAMAMURTHY, A. ATRENS, I. O. SMITH, Mater. Sci. Forum 44–45 (1989) 139.
A. ATRENS, R. COADE, J. ALLISON, H. KOHL, G. HOCHOERTLER and G. KRIST, Mater. Forum 17 (1993) 263.
R. J. COOK, P. E. IRVING, G. S. BOOTH and C. J. BEEVERS, Eng. Fract. Mech. 7 (1975) 69.
P. E. IRVING and A. KURZFELD, Met. Sci. 12 (1978) 495.
R. O. RITCHIE and J. F. KNOTT, Acta Metall. 21 (1973) 639.
N. S. CHERUVU, ASTM ASTP 827 (1984).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Oehlert, A., Atrens, A. Environmental assisted fracture for 4340 steel in water and air of various humidities. Journal of Materials Science 32, 6519–6523 (1997). https://doi.org/10.1023/A:1018659226945
Published:
Issue Date:
DOI: https://doi.org/10.1023/A:1018659226945