Skip to main content
SpringerLink
Log in

Microstructure and Mechanical Behavior of Mechanically Alloyed ODS Ni-Base Superalloy for Aerospace Gas Turbine Application

  • Published:
Advanced Performance Materials

Abstract

The gamma prime precipitation strengthening behavior and oxide dispersion strengthening behavior of mechanically alloyed oxide dispersion strengthened (ODS) Ni-base superalloys have been investigated. The most important microstructural feature affecting the elevated temperature strength of ODS alloys was found to be the grain aspect ratio. Grain aspect ratio after zone annealing was sensitively related to the primary grain size in as-extruded Ni-base superalloy. There was a suitable range of primary grain size to obtain a coarse elongated grain structure after zone annealing. The large grain aspect ratio above a critical value of about 20 resulted in an increase in stress-rupture life more than two orders of magnitude at 950°C. The size and distribution of the gamma prime precipitates were dependent on the solution heat treatment conditions. The microstructural parameters on the gamma prime precipitates significantly affected on the stress-rupture property of ODS Ni-base superalloy at the intermediate temperature range.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. J.S. Benjamin, Metall. Trans. 1A, 2943-2951 (1970).

    Google Scholar 

  2. J.S. Benjamin, Mechanical alloying-A perspective, in New Materials by Mechanical Alloying Techniques, edited by E. Arzt and L. Shultz (Duetsche Geshellschaft Metallkunde, 1988), p. 3-18.

  3. Y.G. Kim and H.F. Merrick, NASA CR-15943, 1979.

  4. S.K. Kang and R.C. Benn, Metall. Trans. 16A, 1285 (1985).

    Google Scholar 

  5. G.H. Gessinger, Metall. Trans. 7A, 1203 (1976).

    Google Scholar 

  6. R.K. Holzler and T.K. Glasglow, Metall. Trans. 13A, 1665 (1982).

    Google Scholar 

  7. K. Mino, Y.G. Nakagawa, and A. Ohtomo, Metall. Trans. 18A, (1987).

  8. Y.G. Kim, L.J. Park, S.H. Hong, J.J. deBarbadillo, and J.M. Poole, Materials Science Forum 113-115, 237-244 (1993).

    Google Scholar 

  9. B.A. Wilcox and A.H. Clauer, Acta Metall. 20A, 743 (1972).

    Google Scholar 

  10. J.J. Stephens and W.D. Nix, Metall. Trans. 16A, 1307 (1985).

    Google Scholar 

  11. C.P. Jongenburger and R.F. Singer, Recrystallization of ODS superalloy, in New Materials by Mechanical Alloying Techniques, edited by E. Arzt and L. Schultz (DGM, 1988), pp.157-200.

  12. C.T. Sims, N.S. Stoloff, and W.C. Hagel, Superalloy II(John Weley & Sons, 1987), pp. 66-78.

  13. R.C. Benn and P.K. Mirchandani, Dispersion strengthening by mechanical alloying, in New Materials by Mechanical Alloying Techniques, edited by E. Arzt and L. Schultz (DGM, 1988), pp. 19-38.

  14. Development and characterization of MA ODS Ni-base turbine applications, Inco Internal Report, 1993, pp. 1-10.

  15. G.E. Dieter, Mechanical Metallurgy(McGraw-Hill Book Company, 1986), p. 295.

  16. J.L. Walter, M.R. Jackson, and C.T. Sims, Alloying, ASM, 1988, p. 125.

  17. T. Khan, Recent development and potential of single crystal superalloy for advanced turbine blades, ONERA Internal Report, 1986, pp. 1-30.

Download references

Author information

Authors and Affiliations

  1. Department of Materials Science and Engineering, Korea Advanced Institute of Science & Technology, 373-1 Kusung-dong, Yusung-gu, Taejon, 305-701, Korea;

    L.J. Park, H.J. Ryu, S.H. Hong & Y.G. Kim

  2. Jointly Appointed at the Center for Advanced Aerospace Materials, POSTECH, Pohang, Kyungbook, 790-784, Korea

    L.J. Park, H.J. Ryu, S.H. Hong & Y.G. Kim

Authors
  1. L.J. Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. H.J. Ryu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S.H. Hong
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Y.G. Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

About this article

Cite this article

Park, L., Ryu, H., Hong, S. et al. Microstructure and Mechanical Behavior of Mechanically Alloyed ODS Ni-Base Superalloy for Aerospace Gas Turbine Application. Advanced Performance Materials 5, 279–290 (1998). https://doi.org/10.1023/A:1008653015451

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1008653015451

Search

Navigation