Cooling efficiency of laminar cooling system for plate mill

  • Dian-hua ZhangEmail author
  • Bing-xing Wang
  • Na Zhou
  • Ming Yu
  • Jun Wang


Heat transfer was researched from a perspective of the industry application. On the basis of the first law of thermodynamics, the cooling efficiency was deduced from the change of enthalpy inside hot plate. The relationship between the cooling efficiency and its influencing parameters was regressed from plenty of data collected from the worksite and discussed in detail. The temperature profiles resulting from the online model and the model modified by regressed formulas were presented and compared. The results indicated that the control accuracy of the modified model was increased obviously.

Key words

hot rolled plate laminar cooling cooling efficiency temperature profile 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Ananya Mukhopadhyay, Sudipta Sikdar. Implementation of an On-Line Run-Out Table Model in a Hot Strip Mill [J]. Journal of Materials Processing Technology, 2005, 169(2): 164.CrossRefGoogle Scholar
  2. 2.
    Siamak Serajzadeh. Prediction of Temperature Variations and Kinetics of Austenite Phase Change on the Run-Out Table [J]. Materials Science and Engineering, 2006, 421(1–2): 260.Google Scholar
  3. 3.
    Sun C G, Han H N, Lee J K, et al. A Finite Element Model for the Prediction of Thermal and Metallurgical Behavior of Strip on Run-Out-Table in Hot Rolling [J]. ISIJ International, 2002, 42(4): 392.CrossRefGoogle Scholar
  4. 4.
    WEI Shi-zheng, WANG Zhao-dong, ZHAO De-wen. Controlled Cooling Technology for Medium Plate [J]. Journal of Iron and Steel Research, 2002, 14(5): 67 (in Chinese).Google Scholar
  5. 5.
    Chen Shih-Jiun, Tseng Ampere A. Spray and Jet Cooling in Steel Rolling [J]. Int J Heat and Fluid Flow, 1992, 13(4): 358.CrossRefGoogle Scholar
  6. 6.
    Institute of Iron and Steel in Japan. Theory and Practice of Steel Rolling [M]. WANG Guo-dong, WU Guo-liang, trans. Beijing: Chinese Railway Press, 1990 (in Chinese).Google Scholar
  7. 7.
    Pasandideh-Fard M, Aziz S D, Chandra S, et al. Cooling Effectiveness of a Water Drop Impinging on a Hot Surface [J]. International Journal of Heat and Fluid Flow, 2001, 22(2): 201.CrossRefGoogle Scholar
  8. 8.
    Ishigai S, Nakanishi S, Ochi T. Boiling Heat Transfer for a Plane Water Jet Impinging on a Hot Surface [A]. Proceedings of the 6th International Heat Transfer Conference [C]. Washington D C: Hemisphere Publishing Corp, 1978. 445.Google Scholar
  9. 9.
    LIU Zheng-dong, Samarasekera I V. Application of Cooling Water in Controlled Run-Out Table Cooling on Hot Strip Mill [J]. J Iron and Steel Res, Int, 2004, 11(3): 15.Google Scholar
  10. 10.
    CHEN SHIH-J. Cooling of a Moving Plate by an Impinging Circular Water Jet [J]. International J Experimental the Thermal and Fluid Science, 1991, 3(6): 147.Google Scholar
  11. 11.
    Zumbrunnen D A. A Method and Apparatus for Measuring Heat Transfer Distributions on Moving and Stationary Plates Cooled by a Planar Liquid Jet [J]. Experimental Thermal and Fluid Science, 1990, 3(2): 202.CrossRefGoogle Scholar
  12. 12.
    Guo R M. Heat Transfer of Laminar Flow Cooling During Strip Acceleration on Hot Strip Mill Runout Tables [J]. Transaction of the ISS, 1993, 20(8): 49.MathSciNetGoogle Scholar

Copyright information

© China Iron and Steel Research Institute Group 2008

Authors and Affiliations

  • Dian-hua Zhang
    • 1
    Email author
  • Bing-xing Wang
    • 1
  • Na Zhou
    • 1
  • Ming Yu
    • 1
  • Jun Wang
    • 1
  1. 1.State Key Laboratory of Rolling and AutomationNortheastern UniversityShenyang, LiaoningChina

Personalised recommendations