Abstract
According to the deformation characteristics of three-roll tube rolling, the existent disadvantages of traditional A Geleiyi and A Tselikov’s formulas were objectively analyzed. An assumption approximate to actual situation was put forward. After suitable simplification, the energy method was adopted to establish velocity fields for permissive movement in deformed areas, and the calculation formula of average unit pressure for three-roll tube rolling was deduced. The values of theoretical calculation are basically consistent with the measured values of large-scale aluminum tube during on-site rolling process. The results proved that the formula is reasonable.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Tselikov A. Stress and Strain in Metal Rolling [M]. Moscow: MIR Publishers, 1967.
LI Lian-shi, HAN Guan-chang. Production of Small Scaled Seamless Pipe [M]. Beijing: Metallurgical Industry Press, 1989 (in Chinese).
SUN Bin-yu. Theories of Strip Casting-Rolling and the Technique [M]. Beijing: Metallurgical Industry Press, 2002 (in Chinese).
SUN Bin-yu, ZHANG Hong, SHI Rong. An Analysis of Casting Rolling Force of Viscous Fluid and Its Technological Influence [J]. Steel Research, 1995, 66(7): 301.
SUN Bin-yu, ZHONG Hong, ZHANG Xiao-ping, et al. The Establishment of Calculation formula for Casting Rolling Process of the Influence of Technological Factors [J]. Transactions of Nonferrous Metals Society of China, 1995, 5(3): 101.
SUN Bin-yu, YUAN Shi-jian, ZHANG Hong, et al. Establishment of Mathematical Moment Model in Twin Casting Rolling Rolls [J]. Transactions of Nonferrous Metals Society of China, 2002, 12(5): 970.
SUN Bin-yu, ZHANG Hong, SUN Hang-lin. Theoretical Analysis of Flow Function Method in Casting Rolling Deformation [J]. The Chinese Journal of Nonferrous Metals, 1999, 9 (1): 115.
Krabbenhoft K, Damkilde L. A General Nonlinear Optimization Algorithm for Lower Bound Limit Analysis [J]. International Journal for Numerical Methods in Engineering, 2003, 56 (2): 165.
Mohaileb M. Computer Modeling of Complex Metal Forming Processes Using the Upper Bound Elemental Technique and Modified Upper Bound Elemental Technique [D]. Saudi Arabia: College of Technology, 2004.
XU Si-guang. Research of Force Parameters and Width Expand of Ring With Energy Method [D]. Taiyuan: Taiyuan Heavy Machinery Institute, 1989 (in Chinese).
Kwan C T. A Concave Circular Parallelepiped Element and Its Application to Three-Dimensional Closed Die Forging [J]. Journal of Materials Processing Technology, 2002, 123(2): 203.
Ciria H, Peraire J. Computation of Upper and Lower Bounds in Limit Analysis Using Secondorder Cone Programming and Mesh Adaptively [A]. 9th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability [C]. Cambridge: Massachusetts Institute of Technology Press, 2004. 181.
JING Qun-ping. Study of Cross Rolling for Big Diameter Aluminum Pipe With FEM and Experiment [D]. Taiyuan, China: Taiyuan Heavy Machinery Institute, 2002 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by Scientific and Technological Brainstorm Project for Ninth Five-Year Plan of China (95-528-02-02-02E); Provincial Natural Science Foundation of Shanxi Province of China (2006011060)
Rights and permissions
About this article
Cite this article
Sun, By., Yuan, Sj. Average unit pressure formula for three-roll tube rolling. J. Iron Steel Res. Int. 15, 38–41 (2008). https://doi.org/10.1016/S1006-706X(08)60141-7
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(08)60141-7