Advertisement

Acta Mechanica Solida Sinica

, Volume 28, Issue 5, pp 484–496 | Cite as

Multiscale Simulation of Incipient Plasticity and Dislocation Nucleation on Nickel Film During Tilted Flat-Ended Nanoindentation

  • Fanlin Zeng
  • Bing Zhao
  • Yi Sun
Article

Abstract

Multiscale simulations of the tilted flat-ended nanoindentation with different tilted angles (from 5° ~ 30°) on the (−110) surface of nickel crystal were studied using the QC method. The model of the indentation is a flat-end indenter inclined by an angle e driven into a half-plane vertically. Load-displacement responses, initial stages of the plasticity deformations and dislocation emissions for nickel film at different inclined angles were obtained and analyzed as well. An energy criterion was successfully proposed to analyze the critical load for the first dislocation emission beneath the edge of the indenter. Simulation results agree well with analytical ones. An elastic model based on the contact theory and the Peierls-Nabarro dislocation model were combined to analyze when and where the dislocation will be emitted beneath the lower surface of an inclined indenter. Results indicate that the key parameter is the ratio of the contact half-width to the position of the slip plane. This parameter shows the range in which a dislocation will probably be emitted. This mechanism explains the simulation results well. This work is of value for understanding the mechanism of dislocation emissions of FCC crystals under tilted flat-ended nanoindentation while providing approaches to predicting when the first dislocation will be emitted and where subsequent dislocations will probably be emitted.

Key Words

multiscale simulations tilted flat-ended nanoindentation dislocations mechanism 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Poon, B., Rittel, D. and Ravichandran, G., An analysis of nanoindentation in linearly elastic solids. International Journal of Solids and Structures, 2008, 45(24): 6018–6033.CrossRefzbMATHGoogle Scholar
  2. 2.
    Oliver, W.C. and Pharr, G.M., Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. Journal of Materials Research, 2004, 19: 3–20.CrossRefGoogle Scholar
  3. 3.
    Fischer-Cripps, A.C., Review of analysis and interpretation of nanoindentation test data. Surface & Coatings Technology, 2006, 200(14–15): 4153–4165.CrossRefGoogle Scholar
  4. 4.
    Gouldstone, A., Van Vliet, K.J. and Suresh, S., Nanoindentation, simulation of defect nucleation in a crystal. Nature, 2001, 411(6838): 656.CrossRefGoogle Scholar
  5. 5.
    Hu, E.L., Sun, Y., Zeng, F.L. and Qu, J.M., Nanoindentation simulation of PE/POSS under different shapes of indenters. Acta Mechanica Solida Sinica, 2011, 24(4): 365–372.CrossRefGoogle Scholar
  6. 6.
    Tadmor, E.B., Ortiz, M. and Phillips, R., Nanoindentation and incipient plasticity. Journal of Materials Research, 1999, 14(6): 2234–2250.CrossRefGoogle Scholar
  7. 7.
    Shenoy, V.B., Phillips, R. and Tadmor, E.B., Nucleation of dislocations beneath a plane strain indenter. Journal of the Mechanics and Physics of Solids, 2000, 48: 649–673.CrossRefzbMATHGoogle Scholar
  8. 8.
    Zeng, F.L. and Sun, Y., Quasicontinuum simulation of nanoindentation of nickel film. Acta Mechanica Solida Sinica, 2006, 19(4): 283–288.CrossRefGoogle Scholar
  9. 9.
    Zeng, F.L., Sun, Y., Liu, Y.Z. and Zhou, Y., Multiscale simulations of wedged nanoindentation on nickel. Computational Materials Science, 2012, 62: 47–54.CrossRefGoogle Scholar
  10. 10.
    Li, J.H., Zhao, X., Wang, S.Q. and Zhang, C.B., Multiscale simulation of the dislocation emissions of single Ni crystal in nanoindentation. Journal of Wuhan University of Technology-Materials Science Edition, 2010, 25: 423–428.CrossRefGoogle Scholar
  11. 11.
    Feichtinger, D., Derlet, P.M. and Van Swygenhoven, H., Atomistic simulations of spherical indentations in nanocrystalline gold. Physical Review B, 2003, 67(2): 024113.CrossRefGoogle Scholar
  12. 12.
    Pei, Q.X., Lu, C. and Lee, H.P., Large scale molecular dynamics study of nanometric machining of copper. Computational Materials Science, 2007, 41(2): 177–185.CrossRefGoogle Scholar
  13. 13.
    Saraev, D. and Miller, R.E., Atomistic simulation of nanoindentation into copper multilayers. Modelling and Simulation in Materials Science and Engineering, 2005, 13(7): 1089–1099.CrossRefGoogle Scholar
  14. 14.
    Hasebe, N., Kojima, K. and Qian, J., Incomplete frictional flat-ended punch on half-plane with edge crack. Journal of Engineering Mechanics, 1999, 125(3): 300–306.CrossRefGoogle Scholar
  15. 15.
    Dupont, V. and Sansoz, F., Molecular dynamics study of crystal plasticity during nanoindentation in Ni nanowires. Journal of Materials Research, 2009, 24(3): 948–956.CrossRefGoogle Scholar
  16. 16.
    Vadalakonda, S., Banerjee, R., Puthcode, A. and Mirshams, R., Comparison of incipient plasticity in bcc and fec metals studied using nanoindentation. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2006, 426(1–2): 208–213.CrossRefGoogle Scholar
  17. 17.
    Jin, J., Shevlin, S.A. and Guo, Z.X., Multiscale simulation of onset plasticity during nanoindentation of Al (001) surface. Acta Materialia, 2008, 56(16): 4358–4368.CrossRefGoogle Scholar
  18. 18.
    Lu, H.B., Ni, Y.S., Mei, J.F., Li, J.W. and Wang, H.S., Anisotropic plastic deformation beneath surface step during nanoindentation of FCC Al by multiscale analysis. Computational Materials Science, 2012, 58: 192–200.CrossRefGoogle Scholar
  19. 19.
    Tadmor, E.B., Ortiz, M. and Phillips, R., Quasicontinuum analysis of defects in solids. Philosophical Magazine, 1996, A73: 1529–1563.CrossRefGoogle Scholar
  20. 20.
    Tadmor, E.B., Ortiz, M. and Phillips, R., Mixed atomistic and continuum models of deformation in solids. Langmuir, 1996, 12: 4529–4534.CrossRefGoogle Scholar
  21. 21.
    Shenoy V.B., Miller, R., Tadmor, E.B., Phillips, R. and Ortiz, M., Quasicontinuum models of interfacial structure and deformation. Physical Review Letters, 1998, 80: 742–745.CrossRefGoogle Scholar
  22. 22.
    Shenoy, V.B., Miller, R., Tadmor, E.B., Rodney, D., Phillips, R. and Ortiz, M., An adaptive finite flement approach to atomic-scale mechanics: the quasicontinuum method. Journal of the Mechanics and Physics of Solids, 1999, 47: 611–642.MathSciNetCrossRefzbMATHGoogle Scholar
  23. 23.
    Miller, R., Tadmor, E.B., Phillips, R. and Ortiz, M., Quasicontinuum simulation of fracture at the atomic scale. Modelling and Simulation in Materials Science and Engineering, 1998, 6: 607–638.CrossRefGoogle Scholar
  24. 24.
    Miller, R. and Tadmor, E.B., A unified framework and performance benchmark of fourteen multiscale atomistic/continuum coupling methods. Modelling and Simulation in Materials Science and Engineering, 2009, 17: 053001.CrossRefGoogle Scholar
  25. 25.
    Voter, A.F. and Chen, S.P., Accurate interatomic potentials for Ni, Al and Ni3 Al. Materials Research Society. Symposium Proceedings, 1987, 82: 175–180.CrossRefGoogle Scholar
  26. 26.
    Sackfield, A., Truman, C.E. and Hills, D.A., The tilted punch under normal and shear load (with application to fretting tests). International Journal of Mechanical Sciences, 2001, 43(8): 1881–1892.CrossRefzbMATHGoogle Scholar
  27. 27.
    Muskhelishvili, N.I., Some Basic Problems of the Mathematical Theory of Elasticity. 3rd ed. P. Noordhoff Ltd., Groningen, the Netherlands, 1953.Google Scholar
  28. 28.
    Friedel, J., Dislocations. New York: Pergamon, 1964.zbMATHGoogle Scholar
  29. 29.
    Rice, J.R., Dislocation nucleation from a crack tip: an analysis based on the Peierls concept. Journal of the Mechanics and Physics of Solids, 1992, 40 (2): 239–271.CrossRefGoogle Scholar

Copyright information

© The Chinese Society of Theoretical and Applied Mechanics and Technology 2015

Authors and Affiliations

  1. 1.Department of Astronautic Science and MechanicsHarbin Institute of TechnologyHarbinChina

Personalised recommendations