Acta Mechanica Solida Sinica

, Volume 24, Issue 6, pp 506–509 | Cite as

The Effect of Bilinear Behaviour on the Direction and Magnitude of the Peeling Moment in a Bi-Material Beam

Article

Abstract

In this work a bi-material beam exhibiting partly bilinear behaviour under a uniform temperature change is analyzed. The essence of solution is based on the approach of Timoshenko’s mechanics of materials. The main aim of the present analysis is to understand the effect of the bilinear behaviour on the peeling moment. This theoretical mechanics model mentioned here can give us useful insights to improve the resistance against the delamination.

Key words

peeling moment layered structures interface thermo mechanical delamination 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Timoshenko, S.P., Analysis of bimetal thermostats. Journal of Optical Society American, 1925, 11: 233–255.CrossRefGoogle Scholar
  2. [2]
    Hess, M.S., The end problem for a laminated elastic strip—I. The general solution. Journal of Composites Materials, 1969, 3: 262–280.CrossRefGoogle Scholar
  3. [3]
    Hess, M.S., The end problem for a laminated elastic strip—II. Differential expansion stresses. Journal of Composites Materials, 1969, 3: 630–641.CrossRefGoogle Scholar
  4. [4]
    Suhir, E., Stresses in bimetal thermostats. ASME Journal of Applied Mechanics, 1986, 53: 657–660.CrossRefGoogle Scholar
  5. [5]
    Suhir, E., Interfacial stresses in bimetal thermostats. ASME Journal of Applied Mechanics, 1989, 56: 595–600.CrossRefGoogle Scholar
  6. [6]
    Suhir, E., Predicted thermal stresses in a bi-material assembly adhesively bonded at the ends. Journal of Applied Physics, 2001, 89: 120–129.CrossRefGoogle Scholar
  7. [7]
    Mirman, I.B., Effects of peeling stresses in a bi-material assembly. ASME Journal of Electronic Packaging, 1991, 113: 431–433.CrossRefGoogle Scholar
  8. [8]
    Mirman, I.B., Microelectronics and the built-up-bar theory. ASME Journal of Electronic Packaging, 1992, 114: 384–388.CrossRefGoogle Scholar
  9. [9]
    Mirman, I.B., Interlaminar stresses in layered beams. ASME Journal of Electronic Packaging, 1992, 114: 389–396.CrossRefGoogle Scholar
  10. [10]
    Moore, T.D. and Jarvis, J.L., A simple and fundamental design rule for resisting delamination in bi-material structures. Microelectronic Reliability, 2003, 43: 487–494.CrossRefGoogle Scholar
  11. [11]
    Moore, T.D. and Jarvis, J.L., The peeling moment a key rule for delamination resistance in I.C. assemblies. ASME Journal Electronic Packaging, 2004, 126: 106–109.CrossRefGoogle Scholar
  12. [12]
    Moore, T.D. and Jarvis, J.L., Peeling in bi-material beams: the peeling moment and its relation to the differential rigidity. ASME Journal of Applied Mechanics, 2004, 71: 290–292.CrossRefGoogle Scholar
  13. [13]
    Gent, A.N. and Hamed, G.R., Peel mechanics. Journal of Adhesion, 1975, 7: 91–95.CrossRefGoogle Scholar
  14. [14]
    Gere, J.M. and Timoshenko, S.P., Mechanics of Materials. 3rd ed. London: Chapman-Hall, 1991.CrossRefGoogle Scholar
  15. [15]
    Yuan, H, Chen, J.F., Teng, J.G. and Lu, X.Z., Interfacial stress analysis of a thin plate bonded to a rigid substrate and subjected to inclined loading. International Journal of Solids and Structures, 2007, 44: 5247–5271.CrossRefGoogle Scholar
  16. [16]
    Kamiya, N., Thermal stress in a bimodulus thick cylinder. Nuclear Engineering and Design, 1977, 40: 383–391.CrossRefGoogle Scholar
  17. [17]
    Eischen, J.W., Chung, C. and Kim, J.H., Realistic modelling of edge effect stresses in bi-material elements. ASME Journal of Electronic Packaging, 1990, 112: 16–23.CrossRefGoogle Scholar

Copyright information

© The Chinese Society of Theoretical and Applied Mechanics and Technology 2011

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringYildiz Technical UniversityIstanbulTurkey

Personalised recommendations