Acta Mechanica Solida Sinica

, Volume 22, Issue 3, pp 213–225 | Cite as

Plastic zone of semi-infinite crack in planar Kagome and triangular lattices

  • Xinming Qiu
  • Lianghong He
  • Yueqiang Qian
  • Xiong Zhang
Article

Abstract

The fracture investigations of the planar lattices made of ductile cell walls are currently limited to bending-dominated hexagonal honeycomb. In this paper, the plastic zones of stretching-dominated lattices, including Kagome and triangular lattices, are estimated by analyzing their effective yield loci. The normalized in-plane yield loci of these two lattices are almost identical convex curves enclosed by 4 straight lines, which is almost independent of the relative density but is highly sensitive to the principal stress directions. Therefore, the plastic zones around the crack tip of Kagome and triangular are estimated to be quite different to those of the continuum solid and also hexagonal lattice. The plastic zones predictions by convex yield surfaces of both lattices are validated by FE calculations, although the shear lag region caused by non-local bending effect in the Kagome lattice enlarges the plastic zone in cases of small ratio of r p /l.

Key words

lattice yield surface crack tip plastic zone anisotropic 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Evans, A.G., Lightweight materials and structures. Materials Research Bulletin, 2001, 26(10): 790–797.CrossRefGoogle Scholar
  2. [2]
    Gibson, L.J. and Ashby, M.F., Cellular Solids: Structure and Properties. Cambridge: Cambridge University Press, 1997.CrossRefGoogle Scholar
  3. [3]
    Wang, A.J. and McDowell, D.L., In-plane stiffness and yield strength of periodic metal Honeycombs, ASME Journal of Engineering Materials and Technology, 2004, 126: 137–156.CrossRefGoogle Scholar
  4. [4]
    Hutchinson, R.G., Wicks, N. and Evans, A.G., et al., Kagome Plate Structures for Actuation. International Journal of Solids and Structures, 2003, 40: 6969–6980.MathSciNetCrossRefGoogle Scholar
  5. [5]
    Fleck, N.A and Qiu, X., The damage tolerance of elastic-brittle, two dimensional isotropic lattices. Journal of the Mechanics and Physics of Solids, 2007, 55: 562–588.MathSciNetCrossRefGoogle Scholar
  6. [6]
    Alonsoa, I.Q. and Fleck, N.A., Damage tolerance of an elastic-brittle diamond-celled honeycomb. Scripta Materialia, 2007, 56: 696–696.Google Scholar
  7. [7]
    Romijn, N.E.R. and Fleck, N.A., The fracture toughness of planar lattices: imperfection sensitivity. Journal of the Mechanics and Physics of Solids, 2007, 55(12): 2538–2564.CrossRefGoogle Scholar
  8. [8]
    Schmidt, I. and Fleck, N.A., Ductile fracture of two-dimensional cellular structures. International Journal of Fracture, 2001, 111: 327–342.CrossRefGoogle Scholar
  9. [9]
    Chen, C., Lu, T.J. and Fleck, N.A., Effect of imperfections on the yielding of two-dimensional foams. Journal of the Mechanics and Physics of Solids, 1999, 47: 2235–2272.CrossRefGoogle Scholar
  10. [10]
    Hutchinson, R.G., Mechanics of Lattice Materials, P.H.D. thesis, Cambridge University, UK, 2004.Google Scholar

Copyright information

© The Chinese Society of Theoretical and Applied Mechanics and Technology 2009

Authors and Affiliations

  • Xinming Qiu
    • 1
  • Lianghong He
    • 1
  • Yueqiang Qian
    • 1
  • Xiong Zhang
    • 1
  1. 1.Department of Engineering MechanicsTsinghua UniversityBeijingChina

Personalised recommendations