Abstract
The Green quasifunction method is employed to solve the free vibration problem of clamped thin plates. A Green quasifunction is established by using the fundamental solution and boundary equation of the problem. This function satisfies the homogeneous boundary condition of the problem. The mode shape differential equation of the free vibration problem of clamped thin plates is reduced to Fredholm integral equation of the second kind by Green formula. Irregularity of the kernel of integral equation is overcome by choosing a suitable form of the normalized boundary equation. Two examples demonstrate the validity of the present method. Comparison with both the series solution and ANSYS finite-element solution shows fine agreement. The present method is a novel and effective mathematical one.
Similar content being viewed by others
References
Xu, Q., Zhu, J.L. and Zhao, Z., New approach to free vibration analysis of plate using virtual boundary element. Journal of Tong Ji University, 2001, 29(8): 888–892 (in Chinese).
Wang, W.D., Cheng, G. and Cheng, Q., Study on free vibration of circular plate with concentrated mass at arbitrary positions by integral equation method. Journal of Mechanical Strength, 2009, 31(5): 832–836 (in Chinese).
Bambill, D.V., La, M.S., Rossit, C.A. and Laura, P.A.A., Analytical and experimental investingation on transverse vibrations of solid, circular and annular plates carrying a concentrated mass at an arbitrary position with marine applications. Ocean Engineering, 2004, 31: 127–138.
Vinayak, R. and Ghosh, M.K., Transverse vibration of thin solid and annular circular plate with attached discrete masses. Journal of Sound and Vibration, 2006, 292: 999–1003.
Xiong, Y.B. and Long, S.Y., An analysis of free vibration problem for a thin plate by local Petrov-Galerkin method. Chinese Quarterly of Mechanics, 2004, 25(4): 577–582 (in Chinese).
Qin, Y.F. and Zhang, W.X., Analysis of free vibration of thin plates by the element-free method. Mechanics in Engineering, 2003, 25(5):37–40 (in Chinese).
Liu, X.Y. and Jin, M.S., Application of the Green’s function method to calculate the natural frequency of plates with arbitrary shape and arbitrarily distributed point supports along edges. Acta Mechanica Solida Sinica, 1993, 14(1): 54–58 (in Chinese).
Xu, Z.L., Elastic Mechanics. Beijing: Higher Education Press, 1998 (in Chinese).
Gorman, D.J., Free Vibration Analysis of Rectangular Plates. New York: ASCE, 1982.
Gorman, D.J., Free vibration analysis of completely free rectangular plates by the superposition-Galerkin method. Journal of Sound and Vibration, 2000, 237(5): 901–914.
Kang, S.W. and Lee, J.M., Free vibration analysis of arbitrarily shaped plates with clamped edges using wave-type functions. Journal of Sound and Vibration, 2001, 242(1): 9–26.
Kang, S.W., Free vibration analysis of arbitrarily shaped plates with a mixed boundary condition using non-dimensional dynamic influence functions. Journal of Sound and Vibration, 2002, 256(3): 533–549.
Kang, S.W. and Atluri, S.N., Free vibration analysis of arbitrarily shaped polygonal plates with simply supported edges using a sub-domain method. Journal of Sound and Vibration, 2009, 327: 271–284.
Chen, W., Shi, J.S. and Chen, L., Investigation on the spurious eigenvalues of vibration plates by non-dimensional dynamic influence function method. Engineering Analysis with Boundary Elements, 2009, 33(6): 885–889.
Chen, J.T., Chen, I.L., Chen, K.H., Lee, Y.T. and Yeh, Y.T., A meshless method for free vibration analysis of circular and rectangular clamped plates using radial basis function. Engineering Analysis with Boundary Elements, 2004, 28(5): 535–545.
Liu, G.R. and Chen, X.L., A mesh-free method for static and free vibration analysis of thin plates of complicated shape. Journal of Sound and Vibration, 2001, 241(5): 839–855.
Ng, C.H.W., Zhao, Y.B. and Wei, G.W., Comparison of discrete singular convolution and generalized differential quadrature for the vibration analysis of rectangular plates. Computer Methods in Applied Mechanics and Engineering, 2004, 193: 2483–2506.
Wang, H., Alatancang. and Huang, J.J., Double symplectic eigenfunction expansion method of free vibration of rectangular thin plates. Communications in Theoretical Physics, 2009, 52(6): 1087–1092.
Shi, J.S., Chen, W. and Wang, C.Y., Free vibration analysis of arbitrary shaped plates by boundary knot method. Acta Mechanica Solida Sinica, 2009, 22(4): 328–336.
Wang, X.W. and Xu, S.M., Free vibration analysis of beams and rectangular plates with free edges by the discrete singular convolution. Journal of Sound and Vibration, 2010, 329(10):1780–1792.
Wei, G.W., Zhao, Y.B. and Xiang, Y., The determination of natural frequencies of rectangular plates with mixed boundary conditions by discrete singular convolution. International Journal of Mechanical Sciences, 2001, 43(8): 1731–1746.
Li, Y.Q. and Li, J., Free vibration analysis of circular and annular sectorial thin plates using curve strip Fourier p-element. Journal of Sound and Vibration, 2007, 305(3): 457–466.
Yalcin, H.S., Arikoglu, A. and Ozkol, I., Free vibration analysis of circular plates by differential transformation method. Applied Mathematics and Computation, 2009, 212(2): 377–386.
Yeh, Y.L., Jang, M.J. and Wang, C.C., Analyzing the free vibrations of a plate using finite difference and differential transformation method. Applied Mathematics and Computation, 2006, 178(2): 493–501.
Wu, T.Y., Wang, Y.Y. and Liu, G.R., Free vibration analysis of circular plates using generalized differential quadrature rule. Computer Methods in Applied Mechanics and Engineering, 2002, 191(46): 5365–5380.
Shu, C., Wu, W.X., Ding, H. and Wang, C.M., Free vibration analysis of plates using least-square-based finite difference method. Computer Methods in Applied Mechanics and Engineering, 2007, 196(7): 1330–1343.
Lim, C.M., Symplectic elasticity approach for free vibration of rectangular plates. Advances in Vibration Engineering, 2010, 9(2): 159–163.
Ghannadi-Asl, A. and Noorzad, A., Free vibration analysis of thin circular plates by the indirect Trefftz method. Mesh Reduction Methods, 2009, 49: 317–328.
Li, X.M., Wu, F., Qin, R. and Huang, Z.H., Spline element-free method for thick/thin plate vibration analysis. Journal of Vibration and Shock, 2010, 29(2): 107–110 (in Chinese).
Xiang, J.W., Chen, X.F., Dong, H.B. and He, Z.J., Finite element method of B-spline wavelet on the interval for thin plate bending and vibration analysis. Engineering Mechanics, 2007, 24(2): 56–61 (in Chinese).
Yuan, H., Green quasifunction method for thin plates on Winkler foundation. Chinese Journal Computational Mechanics, 1999, 16(4): 478–482 (in Chinese).
Wang, H. and Yuan, H., Application of Green quasifunction method in elastic torsion. Journal of South China University of Technology (Nature Science Edition), 2004, 32(11): 86–88 (in Chinese).
Wang, H. and Yuan, H., Application of R-function theory to the problem of elastic torsion with trapezium sections. Journal of Huazhong University of Science & Technology (Nature Science Edition), 2005, 33(11): 99–101 (in Chinese).
Yuan, H., Li, S.Q. and Liu, R.H., Green quasifunction method for vibration of simply- supported thin polygonic plates on Pasternak foundation. Applied Mathematics and Mechanics (English Edtion), 2007, 28(7): 847–853.
Li, S.Q. and Yuan, H., Quasi-Green’s function method for free vibration of simply- supported trapezoidal shallow spherical shell. Applied Mathematics and Mechanics (English Edtion), 2010, 31(5): 635–642.
Li, S.Q. and Yuan, H., Green quasifunction method for free vibration of simply-supported trapezoidal shallow spherical shell on Winkler foundation. Acta Mechanica Solida Sinica, 2010, 23(4): 370–376.
Rvachev, V.L., Theory of R-function and Some of its Application. Kiev: Nauk Dumka, 1982: 415–421 (in Russian).
Cao, Z.Y., Vibration Theory of Plates and Shells. Beijing: China Railway Press, 1989 (in Chinese).
Ortner, V.N., Regularisierte faltung von distributionen. Teil 2: Eine tabelle von fundamen-tallocunngen. Zeitschrift für angewandte Mathematik und Physik, 1980, 31(1): 155–173.
Kurpa, L.V., Solution of the problem of deflection and vibration of plates by the R-function method. Soviet Applied Mechanics, 1984, 20(5): 470–473.
Kurpa, L.V., Rvachev, V.L. and Ventsel, E., The R-function method for the free vibration analysis of thin orthotropic plates of arbitrary shape. Journal of Sound and Vibration, 2003, 261(1): 109–122.
Kurpa, L.V., Lyubitska, K.I. and Shmatko, A.V., Solution of vibration problems for shallow shells of arbitrary form by the R-function method. Journal of Sound and Vibration, 2005, 279: 1071–1084.
Kurpa, L.V., Pilgun, G. and Ventsel, E., Application of the R-function method to nonlinear vibrations of thin plates of arbitrary shape. Journal of Sound and Vibration, 2005, 284: 379–392.
Kurpa, L.V., Shmatko, T. and Timchenko, G., Free vibration analysis of laminated shallow shells with complex shape using the R-functions method. Composite Structures, 2010, 93(1): 225–233.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, S., Yuan, H. Green Quasifunction Method for Free Vibration of Clamped Thin Plates. Acta Mech. Solida Sin. 25, 37–45 (2012). https://doi.org/10.1016/S0894-9166(12)60004-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S0894-9166(12)60004-4