Tensile Properties of TWIP Steel at High Strain Rate
- 6 Downloads
Tensile tests of TWIP steels of two compositions are performed in the strain rate range of 10−5 – 103 s−1. Results indicate that steel 1# does not exhibit TWIP effect but deformation-induced martensitic transformation appears only. There exists TWIP effect in steel 3#. Tensile properties at room temperature are sensitive to strain rate in the studied strain rate ranges. Analysis on the relationship between strain-hardening exponent and strain rates shows that strain-induced martensitic transformation and formation of twins during deformation have significant influence on their strain-hardening behavior.
Key wordstwin-induced plasticity strain rate strain-hardening deformation twin
Unable to display preview. Download preview PDF.
- Grassel O, Frommeyer G, Derder C, et al. Phase Transformation and Mechanical Properties of Fe-Mn-Si-Al TRIP-Steel [J]. Jphys Iv France, 1977, C5: 383.Google Scholar