Advertisement

New development of acid regeneration in steel pickling plants

  • W F Kladnig
Article

Abstract

For acid pickling heat treated mild steel and steel products, up to the middle of the last century, sulfuric acid was primarily in use, which has been replaced stepwise by hydrochloric acid since the sixties. During this time, the pickling of high alloyed steel with hydrofluoric acid or mixtures for hydrofluoric acid together with nitric acid has also been applied on industrial scale. The technologies used by several plant contractors hereby show considerable differences in their engineering. The study provides a survey of the progress in the state of art of regeneration technology as well as the use of different pickling media in the form of a review on existing technologies as well as improvements done within the recent years in the area.

Key words

pickling mild steel high alloyed steel acid recycling technology global emission standard treatment of stack gas 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Gines M J L, Benitez G J, Perez T, et al. Study of the Pickability of 1.8 mm Hot-Rolled Steel Strip in Hydrochloric Acid [J]. Latin Amer Appl Research, 2002, (32): 281.Google Scholar
  2. 2.
    Hake A. The Pickling of Steel With Hydrochloric Acid and Total Regeneration of the Hydrochloric Acid as Well Acid Acontaining Washing Waters [J]. Österr Chem Ztg, 1967, (6): 180 (in German).Google Scholar
  3. 3.
    Goode B J, Jones R D, Howells J N H. Kinetics of Pickling of Low Carbon Steel [J]. Ironmaking and Steelmaking, 1996, 23 (2): 164.Google Scholar
  4. 4.
    Ruthner M J, Ruthner O. 25 Years of Process Development in HCl Pickling and Acid Regeneration [J]. Iron and Steel Engineer, 1977, 54(III): 36.Google Scholar
  5. 5.
    Kladnig W, Krivanec H. Application of the Andritz-Ruthner Spray Roast Process for Production of Soft-Ferrite Prime Material [J]. Sprechsaal Int Ceramics Glass, 1989, 122(6): 558 (in German).Google Scholar
  6. 6.
    Kladnig W, Karner W. The Ruthner Spray Roasting Process for the Production of Ceramic Raw Materials [J]. Am Ceramic Soc Bull, 1990, 69(5): 814.Google Scholar
  7. 7.
    Kladnig W. Synthetic Fe2O3 Pigments Derived by Spray Roasting Hydrochloric Solutions—A Review [J]. Int J Materials and Product Technology, 2004, 21(6): 555.CrossRefGoogle Scholar
  8. 8.
    Steinbach W, Baerhold F. Comparison of Spray Roasting and Fluidized Bed Granulation for the Recovery of Hydrochloric Acid From Metallurgical Processes Through Pyrohydrolysis [A]. Metal Society eds. 32nd Annual Hydrometallurgy Meeting [C]. Toronto: Metal Society, 2002. 643.Google Scholar
  9. 9.
    Fernando L A. Solution Chemistry of HNO3/HF Pickle Mixtures [J]. Met Transactions B, 1990, (21): 5.CrossRefGoogle Scholar
  10. 10.
    Ruthner AG. Process and Equipment for Production or Regeneration of Hydrofluoric Acid [P]. Germany: DP 3021589, 1980.Google Scholar
  11. 11.
    Ugine AG. Method for the Acid Etching of Stainless Steel Products [P]. WO/1987001739, 1987-03-26.Google Scholar
  12. 12.
    Andritz AG. Process for Production or Regeneration of Acid From Metal Containing Solutions [P]. Austria: AT 395 312, 1992.Google Scholar
  13. 13.
    Report EP-A453/R-98-010 b, US Environmental Protection Agency NC 1771 [S].Google Scholar
  14. 14.
    NC27713, US Hydrochloric Emissions [S].Google Scholar
  15. 15.
    ISO 9096, Stationary Source Emissions [S].Google Scholar
  16. 16.
    Kladnig W. Venuri Scrubber Containing Ultrasonic Emittors for Special Use in Hydrochloric Acid Regeneration Plants due to The Spray Roast Principle [P]. Austria: AT 007 923 U1, 2005.Google Scholar
  17. 17.
    Kladnig W. Newly Developed Scrubber for the Elimination Of Hazardous Material Resulting From Industrial Sources [P]. Austria: AT 008 122 U1, 2006.Google Scholar

Copyright information

© China Iron and Steel Research Institute Group 2008

Authors and Affiliations

  1. 1.ICC Chemical ConsultingViennaAustria

Personalised recommendations