An Integrated Approach to Rotating Machinery Fault Diagnosis Using, EEMD, SVM, and Augmented Data

Abstract

Purpose

Since reliability and extended service life of rotating machinery are the industries´ major concerns, fault diagnosis systems are constantly being improved, especially by artificial intelligence methods. Current paper proposes a diagnostic method integrating stationary and non-stationary signal processing techniques, selection of multiple attributes, and classification by machine-learning algorithm. The technique was applied to a small number of measured signals.

Method

The integrated method uses the ensemble empirical mode decomposition (EEMD) (which handles nonlinear and non-stationary data) for signal processing, and the support vector machine (SVM) for the classification of the machinery condition with a small number of signals. Augmented data and feature selection with a genetic algorithm are used to improve the accuracy of the analysis.

Results and Conclusions

Evaluation was obtained by vibration signals from a rotor test rig with different types of faults. Experimental results showed that the proposed method successfully identifies the rotor´s faults with accuracy of 95.19%.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3

References

  1. 1.

    Al-Badour F, Sunar M, Cheded L (2011) Vibration analysis of rotating machinery using time–frequency analysis and wavelet techniques. Mech Syst Signal Process 25:2083–2101

    Article  Google Scholar 

  2. 2.

    Maheswari UR, Umamaheswari R (2017) Trends in non-stationary signal processing techniques applied to vibration analysis of wind turbine drive train—a contemporary survey. Mech Syst Signal Process 85:296–311

    Article  Google Scholar 

  3. 3.

    Liu R, Yang B, Zio E, Chen X (2018) Artificial intelligence for fault diagnosis of rotating machinery: a review. Mech Syst Signal Process 108:33–47

    Article  Google Scholar 

  4. 4.

    Stetco A, Dinmohammadi F, Zhao X, Robu V, Flynn D, Barness M, Keane J, Nenadic G (2019) Machine learning methods for wind turbine condition monitoring: a review. Renew Energy 133:620–635

    Article  Google Scholar 

  5. 5.

    Lazakis I, Raptodimos Y, Varelas T (2018) Predicting ship machinery system condition through analytical reliability tools and artificial neural networks. Ocean Eng 152:404–415

    Article  Google Scholar 

  6. 6.

    Muralidharan V, Sugumaran V (2012) A comparative study of Naïve Bayes classifier and Bayes net classifier for fault diagnosis of monoblock centrifugal pump using wavelet analysis. Appl Soft Comput 12:2023–2029

    Article  Google Scholar 

  7. 7.

    Su Z, Tang B, Qin Y (2015) Multi-fault diagnosis for rotating machinery based on orthogonal supervised linear local tangent space alignment and least square support vector machine. Neurocomputing 157:208–222

    Article  Google Scholar 

  8. 8.

    Baraldi P, Cannarile F, Di Maio F, Zio E (2016) Hierarchical k-nearest neighbours classification and binary differential evolution for fault diagnostics of automotive bearings operating under variable conditions. Eng Appl Artif Intell 56:1–13

    Article  Google Scholar 

  9. 9.

    Ma S, Chu F (2019) Ensemble deep learning-based fault diagnosis of rotor bearing systems. Comput Ind 105:143–152

    Article  Google Scholar 

  10. 10.

    Huang NE, Shen Z, Long SR, Wu MC, Shih HH, Zheng Q, Yen NC, Tung CC, Liu HH (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond Ser A 454:903–995

    MathSciNet  Article  Google Scholar 

  11. 11.

    Lei Y, Lin J, He Z, Zuo MJ (2013) A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mech Syst Signal Process 35:108–126

    Article  Google Scholar 

  12. 12.

    Yang Y, Yu D, Cheng J (2007) A fault diagnosis approach for roller bearing based on IMF envelope spectrum and SVM. Measurement 40:943–950

    Article  Google Scholar 

  13. 13.

    Jegadeeshwaran R, Sugumaran V (2015) Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines. Mech Syst Signal Process 52–53:436–446

    Article  Google Scholar 

  14. 14.

    Zhang X, Zhou J (2013) Multi-fault diagnosis for rolling element bearings based on ensemble empirical mode decomposition and optimized support vector machines. Mech Syst Signal Process 41:127–140

    Article  Google Scholar 

  15. 15.

    Rai A, Upadhyay SH (2018) An integrated approach to bearing prognostics based on EEMD-multi feature extraction, gaussian mixture models and Jensen-Rényi divergence. Appl Soft Comput 71:36–50

    Article  Google Scholar 

  16. 16.

    Zhong JH, Wong PK, Yang ZX (2018) Fault diagnosis of rotating machinery based on multiple probabilistic classifiers. Mech Sys Signal Process 108:99–114

    Article  Google Scholar 

  17. 17.

    Cheng J, Yu D, Yang Y (2008) A fault diagnosis approach for gears based on IMF AR model and SVM. Eurasip J Adv Signal Process. https://doi.org/10.1155/2008/647135

    Article  Google Scholar 

  18. 18.

    Samanta B (2004) Gear fault detection using artificial neural networks and support vector machines with genetic algorithms. Mech Syst Sig Process 18(5):625–644

    Article  Google Scholar 

  19. 19.

    Christianini N, Taylor JS (2000) An introduction to support vector machines and other kernel-based learning methods. Cambridge University Press, Cambridge

    Book  Google Scholar 

  20. 20.

    Kohavi R (1995) A study of cross-validation and bootstrap for accuracy estimation and model selection. IJCAI. Available via http://ai.stanford.edu/~ronnyk/accEst.pdf. Accessed 15 May 2018

  21. 21.

    Salamon J, Bello JP (2017) Deep convolutional neural networks and data augmentation for environmental sound classification. IEEE Signal Process Lett 24:279–283

    Article  Google Scholar 

  22. 22.

    Yang T, Hsieh H (2016) Classification of acoustic physiological signals based on deep learning neural networks with augmented features.In: Computing in Cardiology Conference, Vancouver, BC, Canada

  23. 23.

    Ganeriwala S, Patel S, Hartunga A (1999) The truth behind misalignment vibration spectra of rotating machinery. In: Proceedings of International Modal Analysis Conference, Florida, USA, pp 2078–2205

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Alexandre L. A. Mesquita.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Lobato, T.H.G., da Silva, R.R., da Costa, E.S. et al. An Integrated Approach to Rotating Machinery Fault Diagnosis Using, EEMD, SVM, and Augmented Data. J. Vib. Eng. Technol. 8, 403–408 (2020). https://doi.org/10.1007/s42417-019-00167-4

Download citation

Keywords

  • Vibration
  • EEMD
  • SVM
  • Fault diagnosis
  • Augmented data