Kurzfassung:
Kohlenstoffgebundenes Aluminiumoxid ist ein wichtiges Feuerfestmaterial z.B. in der Stahlindustrie. Die Herstellung dieser Formwerkstoffe erfolgt derzeit im Pressverfahren. Der Druckschlickerguss könnte ein neuer Ansatz für die Herstellung solcher Produkte mit neuem Potenzial in der Chargenzusammensetzung sein. In dieser Studie konnten die ersten kohlenstoffhaltigen, grobkörnigen Aluminiumoxidplatten gegossen werden und sie zeigten vielversprechende thermomechanische Eigenschaften. Die Entwicklung vom Schlicker zur gegossenen Platte ist in dieser Arbeit dargestellt.
Abstract:
Carbon bonded alumina is an important refractory material for example in the steel industry. The production of these shaped materials is currently press forming. Pressure slip casting could be a new approach for manufacturing such products with new potential in the batch composition. In this study the first carbon containing, coarse grained alumina tiles could be casted and showed promising thermomechanical properties. The development from the slurry to the casted plate is shown within this work.
Literatur
Fitchett, A. M., Wilshire, B.: Mechanical Properties of Carbon-Bearing Magnesia: I. Pitch Bonded Magnesia. Br. Ceram. Trans. J. 83 (1984) 54—58.
Pierson, H. O.: Handbook of carbon, graphite, diamond, and fullerenes- Properties, processing, and applications, Noyes Publications, Park Ridge, N.J, 2001.
Itoh, K.: II. Alumina Carbon (for steel casting), in: H. Shikano (Ed.), Refractories handbook, Technical Association of Refractories, Japan, Tokyo (1998) 191—201.
Gardziella, A., Suren, J., Belsue, M.: Carbon from phenolic resins: Carbon yield and volatile components. Recent studies. Interceram 41 (1992) [7-8] 461—467.
Klein, G.: 4.5.5 Druckgießen, in: W. Kollenberg (Ed.), Technische Keramik: Grundlagen, Werkstoffe, Verfahrenstechnik, 2. Aufl., Vulkan-Verl., Essen, 2009 382—395.
Roungos, V., Aneziris, C.G.: Improved thermal shock performance of Al2O3—C refractories due to nanoscaled additives. Ceram. Int. 38 (2012) [2] 919—927.
Klippel, U., Aneziris, C.G., Metzger, A.J.: Shaped Coarse Grained Refractories by Pressure Slip Casting. Adv. Eng. Mater. 13 (2011) [1-2] 68—76.
Schafföner, S., Freitag, L., Hubálková, J., Aneziris, C.G.: Functional composites based on refractories produced by pressure slip casting. J. Eur. Ceram. Soc. 36 (2016) [8] 2109—2117.
Gerlach, N., Aneziris, C.G., Lange, F., Grote, H.: Coarse-grained ceramic heat shields made by pressure slip casting. CFI, Ceram. Forum Int. 93 (2016) [3] 35—38.
Barnes, H.A., Hutton, J.F., Walters, K.: An introduction to rheology, Elsevier; Distributors for the U.S. and Canada, Elsevier Science Pub. Co, Amsterdam, New York, 2005, ©1989.
Adcock, D.S., McDowall, I.C.: The Mechanism of Filter Pressing and Slip Casting. J. Am. Ceram. Soc. 40 (1957) [10] 355—360.
Schafföner, S., Aneziris, C.G.: Pressure slip casting of coarse grain oxide ceramics. Ceram. Int.] 38] (2012}) [1}] 417—
Dinger, D.R., Funk, J.E.: Particle Packing. Interceram 41 (1992) [2] 95—97.
Dinger, D.R., Funk, J.E.: Particle Packing. Interceram 41 (1992) [3] 176—179.
Dinger, D.R., Funk, J.E.: Particle Packing. Interceram 41 (1992) [5] 332—334.
Dinger, D.R., Funk, J.E.: Particle Packing IV]. Interceram} 42} (1993}) [3}] 150—152.
Danke
Diese Arbeit wurde von der Deutschen Forschungsgemeinschaft (DFG) unter der Förderkennzahl AN 322/31-1 gefördert. Die Autoren danken J. Höhne und U. Querner von der TU Bergakademie Freiberg für die Unterstützung bei der Festigkeitsprüfung bzw. der Bestimmung der Korngrößenverteilung.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jahn, C., Gerlach, N., Weber, A. et al. Untersuchungen zum Druckschlickerguss von kohlenstoffgebundenem Aluminiumoxid. Keram. Z. 70, 36–43 (2018). https://doi.org/10.1007/s42410-018-0032-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42410-018-0032-9