Abstract
The main purpose of this paper is to predict the in situ compressive strength of concrete by means of point load strength test as a partially destructive test method. This test method is examined by extracting core specimen from concrete blocks and applying two point loads to the lateral surface of the core specimen. The failure in the core specimen occurred in the direction of applying load where most normal stresses are tensile, while some compressive stresses are generated in the contact surface of load cell with the core specimen. In this study, point load index (PLI) in which a force is divided by the square of the distance between the platen points and cube compressive strength was determined under wet and dry curing conditions at the ages of 7, 14, 28 and 42 days. The effects of various parameters such as core diameter and length to diameter (L/D) ratio were considered experimentally and numerically by means of finite element method using ABAQUS software. A three-dimensional finite element model was constructed to study the stress magnitude and stress distribution at the failure surface. The results showed that the PLI in wet curing conditions were about 12% higher than those in dry curing conditions. In addition, The PLI increased particularly steep when the L/D ratio is less than 1, while then becomes less steep when the L/D ratio is between 1 and 1.8. Meanwhile, it seems that there is no significant difference among PLI values for the ratios of L/D more than 1.8.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Al-Derbi, M. S., & de Freitas, M. H. (1999). Use of the Boussinesq Equation for determining the distribution of stress within a diametrical point load test. Rock Mechanics and Rock Enineering, 32(4), 257–265.
Broch, E., & Franklin, J. A. (1972). Point load strength test. International Journal of Rock Mechanics and Mining Sciences, 9(6), 669–697.
Bungey, J. H., Millard, S. G., & Grantham, M. G. (2006). Testing of concrete in structures (4th ed., p. 352). London: Taylor & Francis.
Chau, K. T., & Wei, X. X. (2001). A new analytic solution for the diametral point load strength test on finite solid circular cylinders. International Journal of Solids and Structures, 38(9), 1459–1481.
Del Viso, J. R., Carmona, J. R., & Ruiz, G. (2008). Shape and size effects on the compressive strength of high-strength concrete. Cement and Concrete Research, 38(3), 386–395.
EN 1992-1-1. (2004). Eurocode 2: Design of concrete structures – part 1-1: General rules and rules for buildings, CEN – European Committee for Standardization.
Hatheway, A. W. (2009). The complete ISRM Suggested methods for rock characterization, testing and monitoring; 1974–2006. Environmental and Engineering Geoscience, 15(1), 47–48.
Hibbitt, D., Karlsson, B., & Sorensen, P. (2011). ABAQUS standard user’s manual. Version (6.11-3). Providence: Dassault Systèmes Simulia Corp.
Ishibashi, K., Zacoeb, A., & Ito, Y. (2008). Influence of coarse aggregate size on the estimation of compressive strength of concrete by point load testing. Journal of Structures and Materials in Civil Engineering, 24, 108–115.
Jankowiak, T., & Lodygowski, T. (2005). Identification of parameters of concrete damage plasticity constitutive model. Foundations of Civil and Environmental Engineering, 6, 53–69.
King D. (2012). The effect of silica fume on the properties of concrete as defined in concrete society report 74, cementitious materials. United Kingdom 37th Conference on Our World in Concrete & Structures, Singapore.
Kupfer, H., Hilsdorf, H., & Rusch, H. (1969). Behavior of concrete under biaxial stresses. ACI Journal, 66(8), 656–666.
Lubliner, J., Oliver, J., Oller, S., & Onate, E. (1989). A plastic-damage model for concrete. International Journal of Solids and Structures, 25(3), 299–326.
Richardson, D. N. (1989). Point load test for estimating concrete compressive strength. ACI Materials Journal, 86(4), 409–416.
Robins, P. J. (1980). Point load strength test for concrete cores. Magazine of Concrete Research, 32(111), 101–111.
Russell, A. R., & Wood, D. M. (2009). Point load tests and strength measurements for brittle spheres. International Journal of Rock Mechanics and Mining Sciences, 46(2), 272–280.
Selçuk, L., & Gökçe, H. S. (2015). Estimation of the compressive strength of concrete under point load and its approach to strength criterions. KSCE Journal of Civil Engineering, 19(6), 1767–1774.
Wang, Y. (2005). Spatial variability of rock strength by irregular lump point load testing of welded topopah spring tuff, Ph.D. Thesis, University of Nevada, Reno.
Wijk, G. (1980). The point load test for the tensile strength of rock. Geotechnical Testing Journal, 3(2), 49–54.
Zacoeb, A., & Ishibashi, K. (2009). Point load test application for estimating compressive strength of concrete structures from small core. Journal of Engineering and Applied Sciences, 4(7), 46–57.
Zacoeb, A., Ishibashi, K. & Ito, Y. (2007). Estimating the compressive strength of drilled concrete cores by point load testing. Proceeding of the 29th JCI Annual Meeting (pp. 525–530).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there is no conflict of interest concerning this article.
Rights and permissions
About this article
Cite this article
Madandoust, R., Bazkiyaei, Z.F.Z. & Kazemi, M. Factor influencing point load tests on concrete. Asian J Civ Eng 19, 937–947 (2018). https://doi.org/10.1007/s42107-018-0074-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42107-018-0074-8